• Journal of Animal Science and Technology
• /
• v.51 no.1
• /
• pp.61-68
• /
• 2009

The effects of hot-air dried tomato powder (HADTP) with 0% (C), 0.25 (T1), 0.50 (T2), 0.75 (T3) and 1.00% (T4) addition to the pork patties on the physicochemical and sensory properties during storage at $-20^{\circ}C$ for 20 days were studied. Cooking loss, thiobarbituric acid reactive substances (TBARS), volatile basic nitrogen (VBN) and CIE $L^*$ values of all products were increased (p<0.05) significantly as the storage period increased, while the pH values were decreased (p<0.05). The CIE $a^*$ and $b^*$value of all samples showed a tendency of decreasing value through the storage days. The pH and cooking loss of T4 were significantly lower (p<0.05) than those of other treatments. The TBARS values of treatments were significantly lower (p<0.05) compared to those of control, but CIE $a^*$ and $b^*$ values of treatments were higher (p<0.05) than those of control at day 20 of storage. VBN values of treatments were significantly lower (p<0.05) than those of control at day 20 of storage. In the sensory evaluation, color and overall acceptability in T3 and T4 were higher (p<0.05) than the others until 15 days of storage. In conclusion, pork patties with 0.75~1.00% HADTP had a higher acceptability, redness and lipid oxidative stability during freeze storage than products without HADTP.

• Journal of the HCI Society of Korea
• /
• v.13 no.1
• /
• pp.21-28
• /
• 2018

The rapid increase of Sinlge-person household and the increase in the use of smart devices necessitate the context analysis of Sinlge-person household and specific design direction for Sinlge-person household products. Previous studies have analyzed the overall context of smart devices without distinguishing between Sinlge-person household and a household. However, since the number of family members, age distribution, and residential space are different in the case of Sinlge-person household, it is necessary to analyze the different behaviors of smart devices. Therefore, this study limits the use environment of smart device of Single-person household to the scope of investigation, and based on the theoretical background, defines the existing comprehensive context based on user's situation that lasts for a certain interval. For the concrete and empirical research results, Consolidated Flow Model was constructed through Contextual Task through user research. This shows the interaction characteristics such as the guarantee of physical space, efficiency, lifestyle reflection, and safety assurance of Single-person household.

• Environmental engineer
• /
• s.323
• /
• pp.22-27
• /
• 2013

종이 펄프 공장의 폐수는 다른 공업에 비해서 폐수량이 많고 오염도가 높다. 목재로부터 종이를 제조하는 경우에 수율은 종이의 종류와 제법에 의해 큰 차이가 있어서 한마디로 말하기는 어렵지만 평균 50~70%로 보는 경우, 목재 성분의 30~50%는 용해 또는 SS의 상태로 폐수중에 존재하기 때문에, 이들이 직접 하천이나 바다에 방류되면 오염의 원인이 된다. 그 때문에 각 공장에서는 목재자원의 종합적인 이용의 입장으로서 제품의 수율을 좋게 하고 동시에 폐수의 양을 감소시키고 폐수에서 유용한 자원을 회수하거나 증해약품의 회수 등을 위하여 연구 및 노력을 계속하고 있는 것이 현 상태이다. 우리 나라의 거의 모든 제지회사에서는 물리적, 화학적 처리법과 생물학적 처리법 중 호기성 처리방법이 주 처리방법으로 사용되고 있으며 탈묵 폐수나 리그닌을 다량 함유하는 폐수의 경우에는 혐기성 처리방법을 이용하기도 한다. 본 실험에서는 우유팩을 재생하여 화장지 제조의 원료로 이용하는 G제지공장의 폐수를 이용하였고, 공장의 원폐수를 부상법으로 1차 처리한 처리수를 실험실로 운반하여 활성슬러지법으로 실험하였다. 처리효율의 영향인자인 HRT를 G제지공장에 맞추어 12시간으로 조정하고 적절한 F/M비(0.23)를 위해 COD와 MLSS가 유지된 후부터 실험을 시작했다. $20^{\circ}C{\sim}560^{\circ}C$까지 $10^{\circ}C$간격으로 온도를 변화시키면서 미생물의 상태변화를 관찰하고, 또한 각 용도에서의 처리수질을 비교해 보았다. 실험조건은 pH는 중성상태(6.5~7.5), DO는 $2{\sim}4mg/{\ell}$, 영양원은 BOD : N : P = 100 : 5 : 1로 맞추고 BOD, COD, SS, SVI를 측정하였으며, 현미경을 통하여 미생물과 Floc를 관찰하였다. $20^{\circ}C$부터 종균제를 초기 운전시 $200mg/{\ell}$ (분말상)을 폭기조에 투여하고 매일 $200mg/{\ell}$를 정기적으로 투입하여 온도변화에 따른 미생물의 상태 및 처리수질을 비교해보았다. 특히 종균제로는 기존의 G제G지공장에서 사용하는 신일 미생물(Bio sound S)종균제와 청림C&C의 종균제(Cell bio P)를 비교 관찰하였다. 고온성 종균제를 두배 투입하여 투입량에 대한 처리효율을 비교하였으며 종균제를 사용하지 않고 운용함으로써 그 차이도 비교할 수 있었다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.1
• /
• pp.7-15
• /
• 2006

We have surveyed test methods for ophthalmic lens coatings and compared the coating quality of lenses supplied by manufactures. Plastic ophthalmic lenses are produced in increasingly larger volumes. However, their softness have need resistant coatings absolutely essential in most cases. Coating lenses are typically evaluated in physical and chemical properties through random selection from produced lenses. No international standard test methods for ophthalmic lenses exist for issues such as adhesion, abrasion resistance, hardness, chemical and hot water resistance with exception of transmittance. We have learned that there is a great deal of confusion regarding the methods employed in the various tests for ophthalmic coating lenses. For this reason, test methods for ophthalmic lens coatings are needed making all of international or domestic standards available.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.445-451
• /
• 2016

It is very important to obtain non-agglomerated nano particle state for practical application of nano technology. In order to improve the functionality of products using nano particles, more precise control of particle size distribution is required in their synthesis process. However, synthesized nano particles are agglomerated easily due to physical and chemical reasons, and it then veils unique properties of the nano particles and causes some troubles in their practical application. In this study, a separation method for nano particles from suspension by using the droplets as the separation space was proposed. Using the suspension of 0.002 wt. % with $TiO_2$ powder, the particle size distribution of nano particles in the recollected suspension was measured. From the results, it was confirmed that it is possible to separate and to recollect the nano particles monodispersed by using the suggested method.

• Magazine of the Korea Concrete Institute
• /
• v.3 no.3
• /
• pp.101-110
• /
• 1991

Results of an experimental study on the manufacture, the mechanical properties and watertightness of pitch - based carbon fiber reinforced fly ash. cement composites are presented in this paper. The carbon fiber reinforced fly ash. cement composites using early strength cement silica powder and a small amount of stylene butadiene rubber latex are prepared with carbon fiber, foaming agents and mixing conditions. As a result, the mechanical and physical properties such as compressive , tensile and flexural strengths, watertightness and drying shrinkage of lightweight carbon fiber reinforced fly ash cement composites are Improved by using a samll amount of stylene butadiene rubber latex. Also, the manufacturing pnx:ess technology of carbon fiber reinforced fly ash . cement composItes is developed. The development and applications of precast products of lightweight carbon fiber remforced cement composites are expected in the near future.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.10-17
• /
• 2019

According to South Korea's policy of supplying eco-friendly hydrogen vehicles, related industries are actively conducting research on the development of hydrogen cars and hydrogen charging station infrastructure. On the other hand, there is a lack of empirical research and assessment of the risk of non-metallic materials (such as liners, seals, gaskets) for classified materials that directly affect the durability and reliability of hydrogen vehicles and hydrogen charging stations. In this study, the risk factors for liners and seals of non-metallic parts used in high-pressure hydrogen installations were derived using FMEA, and the RPN values were calculated by converting the severity, frequency of occurrence and degree of detection into scores. The maximum value of the RPN 600, minimum value 63, average value 278.5 was calculated and periodic control of the liner and seal was identified as important. In addition, through hydrogen soakage and oxygen aging tests for non-metallic rubber products, physical test values that can be used as basic data were presented.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.571-578
• /
• 2016

Recently, review on viability of various industrial by product and natural materials as raw material for concrete has been actively done in aspect of environment-friendly issue and depletion of natural resource. This study conducted fundamental study on the possibility of utilizing mud flat as admixture and filling material for concrete. First, chemical analysis on the viability of mud flat as admixture was done and the researchers compared it with the substance of fly ash and blast furnace slag. According to the result, substance content was proven to be inadequate. In addition, as the replacement rate of mud flat increased, compressive strength and tensile strength decreased. According to the estimated result of chemical substance analysis, possibility of utilizing mud flat as admixture was low. According to the result of experiment done as filling material, 10% ~ 30% replacement rate of mud flat manifested more than 8 Mpa of compressive strength of block which may be utilized for secondary product. However, additional experiment such as making block is required afterward. According to the result of flow experiment, as the replacement rate of mud flat increased, flow value decreased, and through chloride content analysis test, it was proven that mud flat is inappropriate to be applied as steel beam using structure since it has high content of sodium. It may be utilized as products that does not use steel beam such as internal brick.

• Conservation Science in Museum
• /
• v.10
• /
• pp.43-61
• /
• 2009

The Buyeo National Museum was requested conservation treatment for wooden objects excavated from three Baekje archeological sites: Neungsan-ri, Ssangbuk-ri, and Gungnamji Pond. Prior to conservation treatment, analysis was conducted to identify the species used. The results of the analysis revealed wood from diverse species of trees including Hard pine, Cryptomeria japonica D. Don, Zelkova serrata Makino, Quercus spp., Platycarya strobilaceae S. et Z., Castanea spp., Torreya nucifera S. et Z., Taxus cuspidata S. et Z., and Salix spp. A high percentage of the objects were made of Cryptomeria japonica D. Don., a species native to Japan, which indicates that exchange with Japan was active at that time. Among the wooden objects, we analyzed lacquer fragments from six pieces of lacquerware, and the characteristics of the lacquer fragments were peculiar to specific artifacts. Most of the fragments were thicker than 100 ㎛. Pure lacquer and mixed black pigment were used. Infrared spectroscopy of the lacquered wooden fragments revealed that they had a very similar absorption band as refined lacquer, confirming that they were painted with lacquer. For their conservation, we immersed the objects in a high molecular weight aqueous solution of PEG#3,350 (10% → 50%) to strengthen them before vacuum freeze-drying.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.387.2-387.2
• /
• 2014

최근 이동통신 LED 에너지 자동차 산업분야에서 제품의 고기능화 고성능화를 위한 신소재 개발 및 친환경적인 신공정 개발에 있어, PI 또는 PET와 같은 유연성 소재 위에 선택적 패턴 도금 기술, 고기능성 나노/복합 도금 등이 주목 받고 있다. 또한 전 세계적으로 유해물질의 수 출입 규제 움직임이 강력하게 제기되고 있다. 본 연구에서는 유연성 소재인 PET 위에 친환경적 방법으로 구리를 선택적으로 도금하기 위한 실험을 진행하였다. 준비된 PET 필름 위에 Ag paste를 Screen Printing법을 이용하여 Ag 전극을 패턴하고, 그 위에 무전해 도금방식을 이용하여 Ni과 Cu가 도금 되도록 하였다. Ni 무전해 도금은 pH6.5, 65도에서 시행되었으며, Cu 무전해 도금은 환경규제물질인 포름알데히드 대신에 차아인산나트륨을 사용하여 70도에서, 중성근처의 pH 농도(pH7과 pH8)에서 시행되었다. 이들 다층 박막에 대해 X-ray diffraction (XRD), SEM (Scanning Electron Microscope), XPS (X-ray Photoelectron Spectroscopy) 등을 이용하여 물리-화학적/전기적 특성들을 이용하여 조사 분석하였다.