• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.182-191
• /
• 2016

The objective of this study was to asses the quality characteristics of yanggaeng prepared with different ratios of chestnut powder: 0%, 5%, 10%, 15%, and 20%. The moisture content of the control yanggaeng was higher than that of any other chestnut powder added groups. In terms of color, The lightness (L) and yellowness (b) decreased significantly, but redness (a) increased with increasing contents of chestnut powder. The total polyphenol content and DPPH free radical scavenging activities increased as the amount of chestnut powder. Texture profile analysis showed that the hardness, adhesiveness, cohesiveness, and chewiness were higher than the control group. The result of sensory evaluation test and the overall acceptability showed that the taste, color, flavor, chewiness, softness and overall acceptability were the highest in the 10~15% added group while the color and softness were identified no significant different group. Based on these results, it is suggested that yanggaeng with up 10~15% added chestnut powder can be developed as products.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1581-1586
• /
• 2010

Haptic-aided design (HAD) involves the use of a haptic simulator in place of physical prototypes in the design and development of products with which human beings interact physically. The development time and cost can be significantly reduced by adopting this HAD scheme. Although both physical and emotional factors are equally important, only the emotional factors were taken into consideration in the previous HAD process. Consequently, the design of the products was sometimes unsatisfactory from the viewpoint of ergonomics, even though users were emotionally satisfied with the products. To overcome this problem, in this study, we propose a new human-oriented design methodology that is enhanced by taking the physical factors into consideration. The HAD scheme was verified by using a haptic chair simulator to design a tilt mechanism of an office chair for which the stiffness of the backrest can be adjusted; then, the design was simulated using MADYMO. The results show that the proposed method can reflect both the physical and emotional factors to modify the design in real-time.

• Archives of design research
• /
• v.16 no.4
• /
• pp.5-14
• /
• 2003

This study suggest the development and application of the Interactive Design Toolkit as a participatory design method for general customer who are non-expert on design activity to participate in design process of mass customization. In order to let general customers to express their design needs, we have to make a familiar and direct communication method for them. And, customer's design needs should be transformed into digital media. This study define the Interactive Design Toolkit as a design tool for customer participation by direct manipulation of computer system for simulation of design needs by customer themselves. The Interactive Design Toolkit is based on a PC-based image perception system and its application. User can make virtual models in virtual space by manipulating physical objects in real world. And, The toolkit can be used in the field of participatory design for deliverer side customization, especially in system kitchen which is manufactured and distributed in modular system. More improved design toolkit for manipulating 3 dimensional shape is needed for consumer product design and car styling.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1220-1227
• /
• 2011

According to the development of IT technology, life itself is becoming the change to Knowledge-based systems or information-based systems. However, the development of IT technology, the cyber attack techniques are improving. And DDoS a crisis occurs frequently, such as cyber terrorism has become a major data leakage. In addition, the various paths of attack from malicious code entering information in the system to work for your company for loss and damage to information assets is increasing. In this environment, the need to preserve the organization and users of information assets to perform ongoing inspections risk management processes within the organization should be established. Processes and managerial, technical, and physical systems by establishing an information security management system should be based. Also, we should be introduced information security product for protecting internal assets from the threat of malicious code incoming to inside except system and process establishment. Therefore we proposed enterprise and government information security enhancement scheme through the introduction of information security management system and information security product in this paper.

• Resources Recycling
• /
• v.31 no.3
• /
• pp.53-60
• /
• 2022

The physical properties of chlorine-containing cement were analyzed to optimize the operational conditions when waste resources containing chlorine were used in the cement manufacturing process. Cement with clinker to gypsum weight ratios of 95:5 and 93:7 were manufactured. In addition, the iron modulus (IM) of clinker was set to 1.3, 1.5, and 1.7 to evaluate the burnability and physical properties of clinker. With constant chlorine content, increasing gypsum content resulted in a decrease in the 3 day-compressive strength, whereas the 28 day-compressive strength increased. In addition, flow and setting time also increased with increasing gypsum content. As the IM decreased, burnability was improved, free-CaO content decreased, alite and ferrite content increased, and compressive strength increased In particular, the compressive strength of IM 1.3 was approximately 14% greater than that of IM 1.7.

• Korean Journal of Food Science and Technology
• /
• v.13 no.4
• /
• pp.314-318
• /
• 1981

In order to improve the storage stability of spray and freeze dried red ginseng extract powder packed in a bottle, the water vapor permeability of Al-foil laminate paper used for cap closure and shelf life of those products on various storage temperatures and relative humidities were investigated. The thickness of the laminate paper was $93{\pm}3\:{\mu}m$ and its physical properties were equal to standard of ASTM (B-377-66) The absorption rate of the freeze dried powder was 2-6 times greater than that of the spray dried powder at $37^{\circ}C$. Therefore it was considered that the laminate could be used for cap closures for the spray dried powder but unsuitable for the freeze dried powder. The shelf life of the spray dried powder was longer than that of the freeze-dried powder at $37^{\circ}C$.

• Archives of design research
• /
• v.17 no.2
• /
• pp.351-362
• /
• 2004

Generally, they respond to a phenomenon, with their any way, which they have looked at in their surroundings, and also put into their action successively and variously according as what it is. A person who has not so much problems in experiential education added to mental and physical ability prefers controlling his manner by himself as seeing, listening and feeling to being cured it by other physical support. Meanwhile, even though there are tools that we use conveniently in everyday life, it is sometimes required that user is able to control his action by himself with a certain interactive function to deal with a accidental situation. For example, in the home, when they were cooking, washing dishes and taking a bath they would not often control their minds on how to act about flowing water through the faucet going back and forth between saving and easygoing. By reasons of those statements, the project has been studied to propose the new conceptual faucet which digital technology is applied to, for recognizing the volume of water flowed through water pipe as counting it with built-in flow meter, and then saving water as controling the water-flow with faucet lever. It means that homemakers can observe the flow rate of water from the faucet placed in front of the sink in kitchen and control it right away for saving water. For studying this project, the kinds and features of the various flow-meters that measure the volume of water-flow were researched and analyzed for taking a reasonable type to the new ideal faucet. According to this analyzing, turbine-flow-meter was selected as appropriate form for the digital display-built-in faucet that would be presented in this project. As the next step, the basic structure was created for developing a new conceptual faucet. Finally two models have been presented through several steps for making the suitable shape to the new style faucet.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.58-58
• /
• 2011

CNT 나노기술을 응용한 IT산업용 적층간지용 ESD(정전방전, Electrostatic Dissipation)PU 발포필름의 제조 가공기술 및 상품화 개발은 전자제품 패키지에 요구되는 쿠션성과 정전방전 기능을 갖는 폴리우레탄 발포 필름의 제조기술을 확립함으로써 가능 할 수 있다. 특히 IT산업용 필름제품이 개발되면 ESD 성능을 발휘하게 됨으로서 정전기 쇼크에 의한 각종 전자제품의 오작동이나 파손 방지가 가능하게 되어 포장재, 자동차, 전자제품의 하우징 등으로 사용될 수 있게 된다. 현재까지 ESD 기능을 부여하기 위해서 사용되는 충전재로는 금속섬유, 금속플레이크, 탄소섬유, 카본블랙 등이 있으며, 최근 탄소나노튜브를 응용한 연구가 많이 진행되고 있는데 탄소나노튜브는 직경이 수십nm, 종횡비 1000이상의 나노섬유형태로 서 전기전도성이 구리수준으로 알려져 있고 소량을 충전할 시 기계적 특성도 오히려 증대하는 장점을 가지고 있으며 전기적 특성으로는 상대적으로 낮은 나노튜브 함량에서는 ESD를 들 수 있고 높은 함량에서는 전자파 차폐성까지 기대되고 있다. 본 연구에서는 우수한 인장강도, 기계적 강도, 열적 안정성, 내약품성을 가지면서 습식 또는 용융공정을 통해 용이하게 시트, 필름, 코팅제를 제조할 수 있는 방수, 투습방수성을 가지는 유연재료인 폴리우레탄(PU) 1액형 PU에 MWNT 함량이 3wt%인 IPA/MWNT 분산용액을 PU 함량 대비 20, 30, 40파트로 함유시켜 $120^{\circ}C$에서 2분 건조시켜 제조한 그라운드 필름에 2액형 PU와 IPA/MWNT 분산용액에 발포제를 첨가하여 발포온도 140, 150, $160^{\circ}C$에서 5분간 건조시켜 시료 필름을 제조하였다. 제조된 필름의 전기전도성 측정은 부피저항과, 표면저항을 각각 측정하여 확인하였으며, 필름의 마찰 대전압은 E.S.T-7 마찰 대전압 시험기를 이용하여 표면 마찰 대전압과 반감기를 측정하여 확인하고, 필름의 물리적 특성은 인장시험기를 이용하여 breaking stress, breaking strain을 구하였다. 필름의 표면 특성은 영상 현미경 시스템을 사용하여 ${\times}1000$ 배율로 측정하여 분산특성과의 연관성을 확인하였다.

• Journal of Information Technology and Architecture
• /
• v.9 no.3
• /
• pp.275-285
• /
• 2012

DIFs (Data Interchange Formats) are needed to enhance interoperability of physically distributed organizations in SBA (Simulation Based Acquisition) process. DIFs play a role as a template of DPDs (Distributed Product Descriptions) and provide capability to use information directly without data format interchange process by allowing access to DPDs, which include various information and M&S (Modeling & Simulation) resources. This characteristic is essential for interoperability in ICE (Integrated Collaborative Environment) based SBA. This paper proposes a framework for the DIF and outputs from each phase of acquisition process for configuration data related to design and manufacturing in SBA process - Conceptual Data Model, Logical Data Model, Physical Data Model and Physical DIF based on XML. Finally, we propose the DIF model architecture and demonstrate the implementation of DIF example based on it.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.3
• /
• pp.563-575
• /
• 2009

This research has found logical data directly influencing forming consideration set and attitude and attitude strength under the choosing situation based on memory-base proposed by Priester et. al (2004). We've examined the possibility of model extension through physical salient strength according to the location of product display as an external stimulate factor and attitude and attitude strength, consideration set and role on variable choice. Especially, this research practically proposed the method measuring directly the attitude on behavior instead of seeing the intension of behavior or behavior by measuring the behavior itself based on existing experiment methods and applied logistics regression analysis. In conclusion, this research confirmed the possibility of generalization of this model by verifying appropriateness through logical background and actual analysis based on stimulus-base proposed model characters as an integrated model relation between attitude in stimulus-based relation and decision-making.