• Geophysics and Geophysical Exploration
• /
• 제14권2호
• /
• pp.127-132
• /
• 2011

We acquired and interpreted more than 650 km of high-resolution seismic reflection profiles in the Hupo Basin, offshore east coast of Korea at $37^{\circ}N$ in the East Sea (Japan Sea) to image shallow and basement deformation. The seismic profiles reveal that the main depocenter of the Hupo Basin in the study area is bounded by the large offset Hupo Fault on the east and an antithetic fault on the west; however, the antithetic fault is much smaller both in horizontal extension and in vertical displacement than the Hupo Fault. Sediment infill in the Hupo Basin consists of syn-rift (late Oligocene. early Miocene) and post-rift (middle Miocene.Holocene) units. The Hupo Fault and other faults newly defined in the Hupo Basin strike dominantly north and show a sense of normal displacement. Considering that the East Sea has been subjected to compression since the middle Miocene, we interpret that these normal faults were created during continental rifting in late Oligocene to early Miocene times. We suggest that the current ENE direction of maximum principal compressive stress observed in and around the Korean peninsula associated with the motion of the Amurian Plate induces the faults in the Hupo Basin to have reverse and right-lateral, strike-slip motion, when reactivated. A recent earthquake positioned on the Hupo Fault indicates that in the study area and possibly further in the eastern Korean margin, earthquakes would occur on the faults created during continental rifting in the Tertiary.

• Journal of Energy Engineering
• /
• 제24권1호
• /
• pp.114-122
• /
• 2015

In the high convective gas flow condition, irregular shaped water waves from which droplet entrainment occurs are generated under horizontally stratified two-phase flow condition. KAERI proposed a new mechanistic droplet entrainment model based on the momentum balance equation consisting of the shear stress, surface tension, and gravity forces. However, this model requires correlation or experimental data of several physical parameters related to the wave characteristics. In the present study, we tried to measure the physical parameters such as wave slope, wave hypotenuse length, wave velocity, wave frequency, and wavelength experimentally. For this, an experiment was conducted in the horizontal rectangular channel of which width, height, and length are, respectively, 40 mm, 50 mm, and 4.2 m. In the present test, the working fluids are chosen as air and water. The PIV technique was applied not only to obtain images for phase interface waves but also to measure the velocity field of the water flow. Additionally, we developed the parallel wire conductance probe for the confirmation of wave height from PIV image. Finally, we measured the physical parameters to be used in the validation of new droplet entrainment model.

• Tunnel and Underground Space
• /
• 제15권3호
• /
• pp.223-227
• /
• 2005

The physical and mechanical properties of volcanic glass, which is distributed in the Samho area, South Korea were studied. Laboratory rock tests were carried out in order to obtain the various properties of rocks. Specific gravity, water content, absorption, porosity and wave velocity were measured for the physical properties. Uniaxial and triaxial compressive tests, Brazilian test and point load test were also performed for the mechanical properties. The tests of volcanic glass revealed that the apparent specific gravity, water content and absorption were 2.28, $1.67\%$ and $1.72\%$, respectively. Porosity $(3.87\%)$ was lower, whereas P-wave velocity (5330m/s) and S-wave velocity (2980 m/s) were relatively higher. Brazilian tensile strength ot 7.2MPa, and point load strength of 2.6MPa were among the mechanical properties of the rock. Uniaxial compressive strength (62.4MPa) estimated ken point load strength was very closed to the value (66.0MPa) from the uniaxial compressive test. Young's modulus and Poisson's ratio were E=43.2 GPa and v=0.28, respectively. Drawing the tangent line to Mohr-Coulomb failure criterion showed the cohesion of 20.1MPa and internal fraction angle of $28.6^{\circ}$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2012년도 학술발표회
• /
• pp.642-642
• /
• 2012

최근에 들어 지구온난화에 따른 기후변화의 영향으로 국지성 집중호우와 돌발성 호우가 한반도 뿐 아니라 전 세계적으로도 많이 나타나고 있고, 그로 인한 이상홍수의 발생이 우리나라의 인명 및 재산피해를 날로 증가시키고 있는 추세이다. 그러나 현재 국내의 홍수방어시스템은 정확도 및 선행시간 확보 등의 측면에서 국민들의 요구수준까지는 그 역할을 수행하지 못하고 있는 실정이다. 또한 최근 4대강 살리기 사업을 통해 수행된 보 설치 및 하도 준설로 인해 하천환경의 변화가 크게 발생하여, 보다 정확하고 신속한 홍수위 예측기법이 요구되고 있는 실정이다. 이에 따라 현재 4대강 홍수통제소에서는 정확한 홍수위예측을 위해 4대강 본류 및 주요 지류에 대해 수리모형을 구축하고 있고, 기존의 저류함수모형에 의한 강우-유출 해석기법을 적용하여 주요 지류에 대한 유입량을 산정하기 위한 모형을 구축중에 있다. 국내 홍수방어 시스템에 현재까지 사용되어 오고 있는 저류함수모형 및 수위-유량 관계식을 이용한 방법은 물리적 기반의 홍수예측모형으로 유역의 지형학적 인자와 그에 따른 여러 변수를 포함하기 때문에 하천환경의 변화로 인해 각각의 추적과정에서 오차들이 발생하여 해석결과에 영향을 미치는 단점이 있다. 이에 반해 데이터 기반 모형은 강우-유출 모형에서 사용되는 많은 수문학적 자료 및 매개변수들의 사용 없이 오직 수위 및 강우측정 자료만을 이용하여 홍수를 예측하는 모형이다. 본 연구에서는 낙동강 유역에 대해 보다 정확한 홍수위 예측을 위해 현재 낙동강홍수통제소에서 구축중인 낙동강 본류의 수리모형의 주요 지류의 유입량 산정을 위해 기존의 물리적 기반 모형이 아닌 뉴로-퍼지(Neuro-Fuzzy) 모형을 이용한 data 기반 모형을 적용해 기존 물리적 기반 모형과 비교 분석 하고자 하였다. 낙동강의 주요지류인 감천, 금호강, 남강, 내성천, 밀양강, 반변천, 위천, 황강을 적용유역으로 선정하여 유역별로 티센망을 구축하였고, 각 지류별로 수위관측소를 선정하여 최근 10년동안 낙동강유역의 홍수예 경보가 발령되었거나 많은 비가 온 사상을 선정해 모형을 검증하였다. 모형은 실시간 수위측정 자료와 강우자료 및 해당유역 댐의 방류량 자료를 이용해 유역별 최적 입력자료 조합을 선정하여 간단하게 구축할 수 있었다. 또한 10분 단위 및 30분 단위의 입출력 자료로 모형을 구축하여 비교하였다. 이번 연구에서 수행한 낙동강유역에서의 뉴로-퍼지(Neuro-Fuzzy) 모형을 이용한 홍수예측기법을 통해 몇가지 data만으로 유역의 주요지점에 대한 홍수위와 홍수량을 예측할 수 있음을 확인할 수 있었다. 모의 결과는 실측치와 비교해 정확도 면에서 우수함을 보여 주었으나 예측시간이 길어질수록 실측치의 경향을 벗어나는 결과를 보였다. 그러나 실시간 홍수예 경보에 있어서는 만족할만한 선행시간을 확보할 수 있었다. 구축된 Data 기반 모형이 물리적 기반 모형과 더불어 낙동강 홍수예 경보를 위한 모형으로 사용될 수 있다면 보다 효율적인 예 경보 체계 구축에 도움을 줄 수 있을 것으로 판단된다.

• Korean Security Journal
• /
• 제13호
• /
• pp.471-485
• /
• 2007

This study is performed to find out what type instructions are produced to players by coaches and what effects are resulted in cooperative spirit of the concerned group. Furthermore the study has its aims at advancing instructors' skills by using finding of it. The study used 'SPSS 11.0 FOR WINDOW - Statistical Package' to analyze the collected samples and dealt with data of 174 individuals. Statistical analysis of the research for hypothesis verification was about frequency, trust level, mutual relationship, variables, and T-verification. The meaningful level for any result was ranged within 95%(p< .05), 99%(p<.01). The finding are as follows. Effects on pleasure, one of elements of team spirits taken by instructor's training style are analyzed as follows. It was proved to be meaningful in relation with a series of activities like training, democratic, social, compensatory aspects and showed also considerable relation with power based behaviors. That says, players are found to enjoy high pleasure when social and bureaucratic behaviors of instructors are very energetic. In addition to that, training, democratic, and compensatory activities didn't show any meaningful effect. Team spirit was found to play a main role between instructor's behaviors and training, democratic, social rewarding activities. Democratic and social acts influence on team spirit. Looking into the detailed aspects, team spirit was resulted very high in the individuals with low democratic mind and was shown high group spirit by groups with high sociable activities. Teamworks was found to be affected by relation between instructor's acts and training, democratic, social and compensatory aspects and it showed meaningful relations with training, social, bureaucratic behaviors. Low degree of training and bureaucratic activities are found to prefer for power team spirit, and high social activities led a strong teamworks. Group binding spirit was influenced by training, democratic, social compensatory, bureaucratic behaviors and it showed to give effects on democratic, social, and bureaucratic activities of instructors. Low degree of democratic and bureaucratic behaviors are found to produce strong team spirit. In contrast with that, strong social activities was found to be motive of powerful team spirit. Value of team spirit was found to play a main role between instructor's behaviors and training, democratic, social, rewarding activities. It didn't show any meaningful effect on behavior of instructors.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• 제11권5호
• /
• pp.1-13
• /
• 2016

This study aims to observe the impacts of entrepreneurship and market orientation of Seoul's business incubator (BI) CEO's on business performance, as well as investigate the moderating effects of BI supporting services. The main objectives of this study are as follows: first, to observe how the entrepreneurship of CEO's affects business performance; second, to observe how CEO's market orientation as a cultural factor attributes to business performance; third, to verify whether the utilization level of BI supporting services shows moderating effects between entrepreneurship and business performance, and finally to verify whether the utilization level of BI supporting services shows moderating effects between market orientation and business performance. Business incubators in Seoul registered with the Business Incubator Association were surveyed both online and offline to receive 127 responses out of 320 circulations. By filtering out insincere reponses, 117 were used for statistical analysis. Our results assert that the utilization level of physical BI supporting services does indeed strengthen the relation between initiative and financial performance. Also, it is interesting to note that the utilization level of physical BI supporting services supports the relation between risk sensitivity and financial performance. While risk sensitivity on its own shows no positive effect on business performance, a suitable utilization level of BI supporting services is likely to strengthen the connection. In addition, the utilization level of both physical and non-physical supporting services shows a moderating effect between initiative and non-financial performance. Based on the results above, risk-taking business incubator CEOs with initiative are likely to yield better financial performance in terms of increasing sales, if provided with various physical supporting services such as sufficient educational facilities including communal spaces and conference rooms.

• Journal of the Korean Institute of Landscape Architecture
• /
• 제42권5호
• /
• pp.1-12
• /
• 2014

Recently, the reenaction of place's memories that were considered sense of place based on its historical and structural characteristic were assumed important topics for recovering and making the park from industrial sites, such as factory, industrial complex, industrial city, labor residential development, landfill, etc., to the public all over the world. This research aimed to conduct some preliminary data for making the park's sense of place highly. So, after conducting the structural forms of sense of place for Seoul Forest and Seonyudo Park that were designed and built by considering its place memories actively, park planning and design implications that were considered its sense of place were suggested. The research results those were derived from the structural forms of sense of place for Seoul Forest and Seonyudo Park's are the following. First, the Structural Equation Modeling(SEM) on Seoul Forest and Seonyudo Park were determined that the natural-physical, artificial-physical, and experiential environmental factors' satisfaction of Seoul Forest and Seonyudo Park have an effect on forming the Sense of Place. In addition, the sense of place was affected by the willingness to visit. Second, according to its physical environment, the experiential factors, such as plays, exercises and etc., were more important relatively. Therefore, experiential factors should be considered significantly with physical factors to make the sense of place highly. Third, even the places were under similar category, the factors' and valuables' relative importance were changed. As the results of structural equation modeling said, specific valuables' related with each factors would be differentiated due to the places' characteristics. For example, the results were showed that natural-physical factor was more important than artificial-physical factor in Seoul Forest. On the other hand, artificial-physical factor was more important than the natural- physical factor. This research carries some significance for applying a quantitative research method(structural equation modeling) to various place to conduct the sense of place's structural model, for suggesting relative specific methods to make the sense of place, and for being a step forward to substance of sense of place. If further studies conduct focusing on various places to draw the forming models of sense of place that were based this research's analysis methods and results, those researches would contribute to make the urban place meaningful, characteristically and affectionately. Furthermore, those researches would contribute in making a humane and competitiveness city.

• Journal of the Korean Wood Science and Technology
• /
• 제36권1호
• /
• pp.79-87
• /
• 2008

Many researchers have studied on rooftop greening that can be installed in abandoned spaces on a building roof. The most important issue in rooftop greening is the soil weight problem. The light greening materials are needed to solve this problem. Therefore, many alternative materials against the soil were investigated for rooftop greening. In this study, the waste wood chips and the waste paper slurry were evaluated as the lightweight vegetation foundation for rooftop greening. It also has a meaning for recycling of waste materials. The mixture ratio of waste wood chips to waste paper slurry for the board (the foundation of greening) was 60 to 40. The wet strength resin and the sizing agent were additionally added with different amount. After the forming of the board, physical and chemical properties were tested with the variation of wet strength resin and sizing agent. As the result of the test, the board with 15% of wet strength resin in the wet condition showed the highest strength. Futhermore, the moisture evaporation loss from the board surface with sizing agent was much lower than that from the board without sizing agent. Therefore, it was clear that the sizing agent was effective for water retention. The change of thickness in the wet condition was less than 1 mm, and it showed that the board is the predominant material on the dimensional stability. The average pH value of the board was ranged from 7.6 to 8.25.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제25권2호
• /
• pp.240-248
• /
• 1996

To clarify the potentiality of sea cucumbers as dietary food, the effects of those glycoprotein on dietary proteins and physicochemical properties of those proteins were studied. Crude glycoprotein was efficiently extracted using 20mM sodium phosphate beffer(pH 7.0) and by salting out with 80% ammoniym sulfate saturation. The fractions obtained through the DEAE-cellulose ion exchange chromatography was identified as glycoprotein by Schiff's reagent and SDS polyacrylanide gel electro-phoresis. The yields of each glycoprotein from the three kinds of sea cucumbers were 0.814(red), 0.184(blue) and 0.232(black) and the molecular weights of the glycoproteins subunits were ranged from 20,000 dalton(blue and black) to 29,000 dalton(red), respectively. The electrophoretic patterns of the glycoprotein isolates were similar to each other and any significant difference in amino acid pattern was observed. Predominant arnino scids were Asx(aspartic acid and asparagine) and Glx(glutamic acid and glutamine) ; in contrast, histidine and methionine were below 2% as compared to total amino acids. water holding capacities of the glycoprotein isolates from red, blue and black cucumbers were equally 100% and emulsion activities ranged from 53% to 64%. In addition the emulsion stabilities were 7.04, 1.37 and 2.44, respectively. In vitro digestibility of some proteins(casein, SPI and squid) was decreased as increasing the level of the freeze dried sea cucumber powder and glycoprotein isolates. But squid protein was not affected.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.143-143
• /
• 2003

최근 생활수준 및 생활환경의 향상에 힘입어 청결 및 쾌적을 추구하는 것이 사회적 현상으로 나타나고 있다. 요즘처럼 현대화된 시대에 '왜 항균제가 필요한 것일까' 라는 자연스러운 의문이 발생하게 되지만 현실은 항균제를 이용한 다양한 항균제품, 항균가전제품, 항균가공 내ㆍ건자재 및 항상 신선한 선도를 유지할 수 있는 제품 등이 호황을 누리고 있는 것이 현실이며 그 시장 규모는 3,000억원을 상회하고 있다. 이러한 항균 가공제품이 호평을 받는 사회적 배경은 우리를 둘러싼 주변 삶의 경제환경 신장에 따른 쾌적성 추구와 밀접한 관련이 있을 것이다. 이처럼 항균기능이 부여된 제품이 호평을 받고 있음에도 불구하고 국내에서는 항균제품의 주 기능 역할을 하는 항균제에 대한 개발은 초기단계로 국내 시장에서 많은 연구가 이루어지고 있는 실정이다. 국내의 경우, 유기 항균제의 사용이 전체 사용량의 80%를 차지하고 있고, 제올라이트나 인산염을 무기 담체로 항균성 금속 이온(Ag, Zn)을 물리적으로 결합시킨 무기 항균제가 개발된 것이 최근의 기술 수준이다. 이러한 유기 항균제는 미생물의 번식을 억제 또는 사멸시키기 위한 것이지만, 생체의 피부 세포에도 영향을 줄 수 있는 피부 자극원의 하나로 그 사용이 점차로 제한되고 있다. 무기 항균제는 안정성이나 항균력에서는 유기항균제 보다는 뛰어나지만 가격(경제성)이나 색(Color), 사용성 (Application)측면에서는 여러 가지 문제를 나타내고 있다. 귀금속이므로 가격이 고가이며, 금속고유의 색으로 회귀하려는 플라즈몬 효과에 의해 색(Color)의 조절이 불가능, 분말형태이므로 지류에 첨가시키는 방법 등이 큰 문제로 부각되고 있다. 이 러한 문제점을 해결할 수 있는 기술이 나노기술이다 나노기술(Nano-Technology)은 물질을 분자, 원자단위에서 규명하고 제어하는 기술로서 원자, 분자를 적절히 결합시킴으로서 기존 물질의 변형, 개조는 물론 신물질의 창출을 가능케 하는 기술이다. 나노기술은 여러분야로 세분화되지만 그중 산업화에 가장 접목이 용이한 기술이 나노입자(Nano-Particle)제어 기술이며, 나노입자는 통상적으로 입자크기가 수 nm에서 100nm이하 크기의 넓은 표면적을 가진 콜로이드 상의 불균일 분산입자를 말한다. 나노입자(Nano-Particle)는 기존의 입자($\mu\textrm{m}$)보다 물리적 및 광학적 성질이 우수하고 그 자체의 기능면에서도 탁월하기 때문에 국내외의 여러 산업에서도 기존제품의 품질 향상 및 기능성부여, 기존 공정의 개선 및 생산 원단위 절감 등 경제적, 생산적인 측면을 고려하여 적합한 나노입자를 채택, 적용하고자 하는데 많은 노력을 기울이고 있다. 이에 천연 항생제로 알려진 Ag, 즉 항균 및 탈취, 전기적 기능이 우수한 은(silver, Ag)을 나노(nm) 입자희 제조하고 이와 더불어 이산화티탄(TiO2) 복합 분체를 제조하여 제조된 나노 입자 및 복합 분체를 사용함으로써 환경 친화적이며 다양한 용도로 활용 가능한 소재 개발에 연구 내용을 두고 있다. 본 연구를 통한 기대 효과로서 환경성 측면에서는 환경 친화적인 나노 입자의 제조로 기능성 나노 입자에 친 환경성을 부여하여 유기계 항균제 대체 효과를 발현하고 이를 제품에 적용함으로써 다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인 측면에서도 고부가 가치의 제품 개발에 따른 새로운 수요 창출과 수익률 향상, 기존의 기능성 안료를 나노(nano)화하여 나노 입자를 제조, 기존의 기능성 안료에 대한 비용 절감 효과등을 유도 할 수 있다. 역시 기술적인 측면에서도 특수소재 개발에 있어 최적의 나노 입자 제어기술 개발 및 나노입자를 기능성 소재로 사용하여 새로운 제품의 제조와 고압 기상 분사기술의 최적화에 의한 기능성 나노 입자 제조 기술을 확립하고 2차 오염 발생원인 유기계 항균제를 무기계 항균제로 대체할 수 있다. 이와 더불어 안료의 형상 균일화 기술을 확보하여 가격 경쟁력 및 부가가치 향상을 기대할 수 있다.