• Korean journal of food and cookery science
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2002

A study on the seafood consumption was conducted from 1902 adolescent students (1110 boys and 792 girls) attending middle or high school to assess the attitude and degree of satisfaction for seafood being served in the school lunch program and ultimately to promote greater seafood consumption. A self-administered questionnaire was used to record the results. The results were as follows: Sixty percent of the respondents appeared to like or not to be reluctant to seafood. The main reasons for favoring seafood were its nutritious effect and taste. On the other hand, the reason for disliking seafood was due to its peculiar smell. In terms of cooking methods, the subjects preferred raw, fried, and grilled seafdod, whereas they disliked salt-fermented, seasoned and stewed dishes. The highly preferred seafood were crab, shrimp, tuna and squid. Only 6.6% of middle school students (MS) and 3.7% of high school students (HS) liked the seafood served in school lunch program, whereas the others responded 'so so'or disliked it. The reasons for disliking seafood being served in school lunch program were poor taste (14.7% of MS, 23.5% of HS), lack of freshness(6.3% of MS, 13.9% of HS) and unattractable cooking methods(3.4% of MS, 11.1% of HS). To promote seafood consumption in school lunch program, subjects anticipated the taste improvement (37.7% of MS, 48.5% of HS), use of a variety of seafood (19.8% of MS, 24.0% of HS) and cooking methods(12.6% of MS, 22.4% of HS). Above results suggested that further efforts are needed to provide preferred cooking methods and seafood items as a way of increasing seafood acceptability.

• Journal of Environmental Impact Assessment
• /
• v.32 no.6
• /
• pp.533-544
• /
• 2023

The Ministry of Agriculture, Food and Rural Affairs has been promoting policies to strengthen the functions of rural centers (culture, welfare, economy, education, etc.) and to ensure that services from the centers are delivered to and connected to hinterland villages. For this policy purpose, the rural center revitalization project and the basic living base creation project within the rural development projects are being promoted. However, in the process of carrying out the actual project, as the focus is on strengthening the functions of rural centers, service delivery and connection with hinterland villages are not being actively promoted. therefore, in this study, we analyze the projects previously carried out in Jeoksang-myeon, Muju-gun and the regional status, analyze the reasons why hinterland village services were not connected and activated, and propose a direction for the second phase of the basic living base creation project to be carried out in the future. As a result of analyzing the reasons for the failure of hinterland village services to be activated, problems such as disadvantages in accessing services due to dispersed residence in rural areas and limitations in topographical structure, and the lack of a service delivery system to develop demand in hinterland areas were found to be problems. Improvement measures were derived as follows. First, it is a stepping stone construction plan proposed to overcome topographical limitations. Establish a stepping base that will function as a service intermediate terminal to ensure efficient service delivery. Second, for a rational decision-making structure, we proposed a plan for deploying communication channels that could closely collect local opinions by operating various small-scale communities along with the efficient composition of a resident committee that includes residents of the central and hinterland villages and various classes. Third, it is a virtuous cycle of local manpower training plans that train local residents into professional instructors. We aim to complete a sustainable, resident-led service supply system by nurturing the most important service deliverers, that is, activists, in service delivery.

• The Journal of Korean Medicine
• /
• v.17 no.2 s.32
• /
• pp.337-393
• /
• 1996

The purpose of this study is to evaluate and standardize the four scales of Questionnaire for the Sasang Constitution Classification 　II (QSCCII). QSCCII is newly prepared by statistical item analysis and is designed to examine its diagnostic discriminability. QSCCII is administered to 1366 random informants. From the survey, we could get the data for the standardization. The criteria of standardization are based on the data from 265 informants who are examined by professionals. Collectted data are analyzed by internal consistency, variation analysis(ANOVA), Duncan test and discrimination analysis of SPSS PC+ V4.0 program. The results are as follows reliability of four scales for QSCCII is relatively valid. The internal consistency of Tae-yang(太陽) (太陽) scale is Cronbach's a=0.5708. That of So-yang(少陽) scale is a=0.5708. That of Tae-eum(太陰) scale is a =0.5922. That of So-eum(少陰) scale is a=0.6319. 2. There is a significant difference between each group through variation analysis of four scales. 3. The process of standardization is based on the average value and standard deviation with respect to age and sex difference of each criteria 4. This study suggests a source of standardization of Sasang Constitution Classification by providing norms in which the differences of age, sex, and number of items are taken into deep consideration. QSCC Ⅱ, therefore, can be applied to every age(the 10's to the 60's) and sex groups. 5. The recalculation of the raw-score to standard value (T-score) shows that the diagnostic discriminability (Hit-ratio: 70.08%) of QSCC Ⅱ brings about 37% improvement than proportional chance criteria (33.33%). Especially, Hit-ratios of Tae-eum In(74.5%) and So-eum In(70.8%) are higher than that of So-yang In(60.0%). 6. QSCC has discriminability only to male informants. Compared with QSCC, however, QSCC II has relatively efficient discriminability both to male and female informants. 7. These results would be a demonstration of the fact that the QSCC II could be used as a tool for sasang constitution classification.

• Journal of Sasang Constitutional Medicine
• /
• v.8 no.1
• /
• pp.187-246
• /
• 1996

The purpose of this study is to evaluate and standardize the four scales of Questionnaire for the Sasang Constitution ClassificationII (QSCCII). QSCCII is newly prepared by statistical item analysis and is designed to examine its diagnostic discriminability. QSCCII is administered to 1366 random informants. From the survey, we could get the data for the standardization. The criteria of standardization are based on the data from 265 informants who are examined by professionals. Collected data are analyzed by internal consistency, variation analysis(ANOVA), Duncan test and discrimination analysis of SPSS PC+ V4.0 program. The results are as follows 1) The reliability of four scales for QSCCII is relatively valid. The internal consistency of Tae-yang(太陽) scale is Cronbach's ${\alpha}=0.5708$. That of So-yang(少陽) scale is ${\alpha}=0.5708$. That of Tae-eum(太陰) scale is ${\alpha}=0.5922$. That of So-eum(少陰) scale is ${\alpha}=0.6319$. 2) There is a significant difference between each group through variation analysis of four scales. 3) The process of standardization is based on the average value and standard deviation with respect to age and sex difference of each criteria. 4) This study suggests a source of standardization of Sasang Constitution Classification by providing norms in which the differences of age, sex, and number of items are taken into deep consideration. QSCCII, therefore, can be applied to every age(the 10's to the 60's) and sex groups. 5) The recalculation of the raw-score to standard value (T-score) shows that the diagnostic discriminability (Hit-ratio : 70.08%) of QSCCII brings about 37% improvement than proportional chance criteria(33.33%). Especially, Hit-ratios of Tae-eum In(74.5%) and So-eum In(70.8%) are higher than that of So-yang In(60.0%). 6) QSCC has discriminability only to male informants. Compared with QSCC, however, QSCCII has relatively efficient discriminability both to male and female informants. 7) These results would be a demonstration of the fact that the QSCCII could be used as a tool for sasang constitution classification.

• Food Science and Preservation
• /
• v.16 no.4
• /
• pp.579-589
• /
• 2009

We focused on the condition of washed, fresh ginseng in the market and analyzed consumer attitudes to the product to improve the consumption of fresh ginseng. A preference for fresh ginseng was high among every age class, and was particularly notable in older individuals. Fresh ginseng was usually eaten as ginseng chicken soup, mostly in summer and winter, and as a valuable health food, rather than because of desirable qualities of taste or smell. A total of 66.5% of those surveyed reported that they had purchased fresh ginseng, mostly from big discount stores. Such stores were preferred as outlets owing to a reputation for quality and shopper convenience (the stores were located near interviewees' homes). More than 70% of purchasers emphasized that they chose to purchase in department stores and traditional markets owing to the reputation for quality of such sources. Most consumers considered quality to be a prime element in purchase decisions. A total of 32.9% of those surveyed had bought washed fresh ginseng to give as a gift to a friend. Of those surveyed, 67.1% had never bought washed fresh ginseng. The following reasons were proposed to explain the preference for purchase of ginseng with attached soil. Most consumers (40.2%) thought the soil was a reflection of quality. Those who preferred washed fresh ginseng considered that the material was hygienic and convenient to store. When questioned about their intention to buy washed fresh ginseng, 55.0% of consumers replied in the affirmative and 17.1% in the negative. When consumers were asked whether they would be willing to pay an additional charge for the washing and packing of fresh ginseng, 58.8% answered in the affirmative.

• Journal of Wetlands Research
• /
• v.21 no.2
• /
• pp.140-146
• /
• 2019

In order to manage non-point sources, the paradigm of the system should be changed so that the management of non-point sources will be systematized from the beginning of the use and development of the land. It is necessary to change the method of national subsidy support and poeration plan for the non-point source management area. In order to increase the effectiveness of the non-point source reduction project, it is necessary to provide a minimum support ratio and to provide additional support according to the performance of the local government. A new system should be established to evaluate the performance of non-point source reduction projects and to monitor the operational effectiveness. It is necessary to establish the related rules that can lead the local government to take responsible administration so that the local governments faithfully carry out the non-point source reduction project and achieve the planned achievement and become the sustainable maintenance. Alternative solutions are needed, such as problems with the use of $100{\mu}m$ filter in automatic sampling and analysis, timely acquisition of water sampling and analysis during rainfall, and effective management of non-point sources network operation management. As an alternative, it is necessary to consider improving the performance of sampling and analysis equipment, and operate the base station. In addition, countermeasures are needed if the amount of pollutant reduction according to the non-point source reduction facility promoted by the national subsidy is required to be used as the development load of the TMDLs. As an alternative, it is possible to consider supporting incentive type of part of the maintenance cost of the non-point source reduction facility depending on the amount of pollutants reduction.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.500-510
• /
• 2008

Statement of problem: Recently researches about WC/C (Tungsten Carbide/Carbon) or TiN (Titanium Nitride) coating on abutment screws are going on. It decreases friction coefficient, resistance against corrosion and withdrawal of physical fragility when the coating is applied to the metal surfaces. It is reported that coated abutment screws improved abrasion, adaptability and detorque force. Purpose: This study is about the effects of coated abutment screws on loosening of screw and for the purpose of solving the loosening phenomenon of abutment screws which is clinical problem. Material and methods: Detorque force and surface changes are compared when 10 times of repeated closing and opening are applied to both uncoated titanium abutment screws (Group A) and coated abutment screws with WC/C (Group B) and TiN (Group C). Each group was made up of 10 abutment screws. Results: 1. Before repeated closing and opening, Somewhat rough surface with regular direction was observed in Group A. Coated granules were observed in group B and group C and overall coated layer appeared in regular and smooth form. 2. Before repeated closing and opening, The coated surface showed bigger and thicker size of coated granules in Group C than Group B. 3. After repeated closing and opening, abrasion and deformation of abutment screw surface was observed in Group A and Group B. Exfoliation phenomenon was observed in Group B. 4. Group A showed biggest range of decrease when the weight changes of abutment screws were measured before and after repeated closing and opening. Group C showed less weight changes than Group B but there was no statistical difference between two groups. 5. Group B and Group C showed higher average detorque force than Group A and there was statistical difference. 6. Group A showed more prominent decrease tendency of average detorque force than Group B and Group C. Conclusion: Coated abutment screws with WC/C or TiN did not show prominent surface changes than uncoated titanium abutment screws even though they were repeatedly used. And they showed excellent resistance against friction and high detorque force. Thus it is considered that adaptation of WC/C or TiN coating on abutment screws will improve the screw loosening problem.

• The Korean Journal of Archival Studies
• /
• no.17
• /
• pp.157-202
• /
• 2008

Archival Objects are defined as objects having historical, aesthetic, and artistic value as well as archival value created and used with a particular purpose in business process. Increasingly, many countries including Canada, Australia, China are recognized the importance of Archival Objects and designated them as national records. In Korea, Archival Objects are involved in national records through '2006 Plan for the Archives and Records Management Reform'. So National Archives and Records Service provided a foothold for comprehensive plan of national records management including Archival Objects. And also, by revising Records and Archives Management Act in 2007, National Archives and Records Service declared aggressive will to management Archival Objects. Until now, Objects held in public institution were easy to be damaged because definition or scope of Archival Objects was ambiguous and management system for material character wasn't exist. Even though the revised Records and Archives Management Act suggest definition and declare the responsibility of management, management system focused on various shape and material of objects need to be established. So this study has defined Archival Objects shortly and carried out a research 5 institutions on the actual management condition. By researching the result of institution survey, Records and Archives Management Act and actual Records Management System, we could find some problems. In solving these problems, We provide objects management process in the order capture ${\rightarrow}$ register ${\rightarrow}$ description ${\rightarrow}$ preservation ${\rightarrow}$ use${\rightarrow}$disposition. In addition, close cooperation between records center and museum of institution should be established for the unitive management at national level. This study has significance in introducing a base to manage Archival Objects systematically. By studying more, we hope to advance in management of valuable Archival Objects.

• Economic Analysis
• /
• v.26 no.1
• /
• pp.1-33
• /
• 2020

Recent discussions about a minimum wage increase (MWI) and its influence on the economy have mainly focused on the quantitative aspects, such as labor costs and employment. However, concerning the qualitative aspects, an MWI could have positive effects by enhancing firm productivity and crowding out marginal firms from the market. These positive effects of an MWI can offset, to some extent, its potential negative effects - increasing labor costs and decreasing employment, among others. In this regard we empirically examine the impact of an MWI on firm productivity (total factor productivity). Using firm level panel data from the manufacturing industry in Korea, we calculate the influence rates of a minimum wage by sector and by firm size (number of workers), and analyze its effects on firm productivity. In particular, the production functions of the firms are estimated by taking into account endogeneity among the input factors, in order to resolve the drawbacks of existing studies - underestimating the capital factor coefficient and overestimating the labor factor coefficient. This study finds that the influences of an MWI on wages, employment, and productivity are substantially different across sectors and firm sizes. While an MWI has shown to have positive influences on productivity growth in the manufacturing industry as a whole, each sector demonstrates a different direction of effect, and the degree of productivity change also varies by sector. The impacts of an MWI on firm productivity are generally estimated to be more negative for smaller firms, but in some sectors the effects are found to be positive. In addition, the wage increases resulting from an MWI seem to cause a productivity enhancement across all sectors in the manufacturing industry. The policy implications of this study are as follows. Considering the empirical findings that an MWI causes an increase in productivity in many sectors of the manufacturing industry, it would be desirable to take into consideration not only the negative side effects but also the positive effects of an MWI when designing any future minimum wage policy. Moreover, in spite of there being a uniform minimum wage, this study finds that the diverse influence rates of a minimum wage across firms have different impacts on wages, employment, and productivity across sectors or firm size. This finding could be conducive to discussions about differentiation among minimum wage schemes by sector or firm size.

• Korea Science and Art Forum
• /
• v.29
• /
• pp.305-318
• /
• 2017

The need for recognizing the crime in the urban spaces as a social problem and finding out specific approaches such as the study of space design and various guidelines for crime prevention is increasing. In this regard, "Crime Prevention Through Environmental Design" (marked as "CPTED") is actively underway. Yeomri-dong Salt Way is the first place to which the Seoul Crime Prevention Design Project was appled. The business objective of improving the local environment has been implemented rationally through cooperation and voluntary participation between subject of the project executives and community members. Since its efficiency has been proven, the sites have been expanded since then and becomes a benchmarking example of each local government.This kind of problem solving effort has the same context in purpose and direction of the 'Village Art Project' which has been implemented since 2009 with the aim of promoting the culture of the underdeveloped area and encouraging the participation of the residents by introducing the public art. It is noteworthy that this trend is centered around the characteristics of community functions and values. The purpose of this study is to propose the application method of community furniture as a way to increase the efficiency of CPTED to improve the 'quality of life' of residents. To do this, we reviewed CPTED, community design, public art literature and prior research, and identified the problems and implications based on the site visit Yeomri-dong of Seoul and Gamcheon Village of Pusan which is the successful model of "Seoul Root out Crime by Design" and 'Maeulmisul Art Project' respectively. The common elements of the two case places identified in this study are as follows: First, the 'lives' of community residents found its place in the center through the activation of community by collaborative activities in addition to the physical composition of the environment. Second, community design and introduction of public art created a new space, and thereby many people came to visit the village and revitalize the local economy. Third, it strengthened the natural monitoring, the territoriality and control, and the activity increase among the CPTED factors. The psychological aspect of CPTED and the emotional function of public art are fused with the 'community furniture', thereby avoiding a vague or tremendous approach to the public space through a specific local context based on the way of thinking and emotion of local people and it will be possible to create an environment beneficial for all. In this way, the possibility and implication of the fusion of CPTED and public art are expected to be able to reduce the social cost through the construction of the crime prevention infrastructure such as expansion of the CPTED application space, and to suggest a plan to implement the visual amenity as a design strategy to regenerate city.