• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.2
• /
• pp.155-164
• /
• 2013

Two design techniques for more accurate and more convenient hybrid positioning system with visible light communication (VLC) and ad-hoc wireless network infrastructure are proposed, in order to overcome the problems of high estimation error, high cost, and limited service range of the conventional positioning techniques. First method is based on a non-carrier VLC based hybrid positioning technique for applications involving of low data rate optical sensing and narrow-range visible light reception from transmitter, and long-range positioning. The second method uses a 4 MHz carrier VLC-based hybrid positioning technique for a high data rate optical sensing and wide-range visible light receiving from transmitter, and mid-range positioning applications. In indoor environments with obstacles where there are long-range 7731.4cm and mid-range 2368cm distances between an observer and a target respectively, the hybrid positioning developed with two design techniques are tested, and the proposed system is verified and analyzed in this paper.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.101-108
• /
• 2005

Inertial Navigation System has been used extensively to determine the position, velocity and attitude of the body. An INS is very expensive, however, heavy, power intensive, requires long setting times and the accuracy of the system is degraded as time passed due to the accumulated error. Global Positioning System(GPS) receivers can compensate for the Inertial Navigation System with the ability to provide both absolute position and attitude. This study describes a method to improve both the accuracy of a body positioning and the precision of an attitude determination using GPS antenna array. Existing attitude determination methods using low-cost GPS receivers focused on the relative vectors between the master and the slave antennas. Then the positioning of the master antenna is determined in meter-level because the single point positioning with pseudorange measurements is used. To obtain a better positioning accuracy of the body in this research, a wireless internet is used as an alternative data link for the real-time differential corrections and dual-frequency GPS receivers which is expected to be inexpensive was used. The numerical results show that this system has the centimeter level accuracy in positioning and the degree level accuracy in attitude.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.1
• /
• pp.38-44
• /
• 2019

This paper proposes fingerprint-based positioning methods which can be used in a magnetic resonant wireless power transfer(WPT) system and verifies their performance. A new receiver coil with small orthogonal auxiliary coils is proposed to measure magnetic field signals in three axial directions. The magnitude and phase characteristics of the three-axis electromotive force can be obtained by using the proposed coil. To predict a position with the measured values, we propose a lookup table-based method and linear discriminant analysis-based method. For verification, the proposed methods are applied to predict 75 positions of the 6.78 MHz WPT system, and the performances such as accuracy and computation time are compared.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.97-104
• /
• 2008

Location-based services provide customized information or services according to the user's location. The existing localization schemes for outdoor environment are not applicable to the indoor localization system which requires higher accuracy of location estimation than that of the outdoor localization system. In this paper, we employ the received signal strength(RSS) to approximate the distance between a moving target and a reference point and use the triangulation method to estimate the location of the moving target for the indoor localization system in IEEE 802.15.4 wireless PAN(personal area network). For the indoor localization system, we propose a scheme which selects the best reference points to enhance the localization accuracy and adaptively reflects the changes in propagation environments of a moving target to the distance approximation. Through the implementation of the localization system, we have verified the performance of the proposed scheme in terms of the estimation accuracy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.432-434
• /
• 2013

본 논문의 실내위치측위시스템은 무선랜 환경에서 AP의 RSSI 신호를 수신하여 Friis 공식을 통해 거리로 산출되고, 산출된 거리는 삼각측량법에 의해 (x, y)좌표로 변환되어 현재의 위치를 나타낸다. 여기서 RSSI 신호는 신호잡음을 포함하고 신호잡음으로 인하여 실제 위치 측위 시 오차가 발생한다. 이러한, 오차를 보정하고 실내위치측위 정확도를 향상하기 위해 비선형시스템에서 사용하는 확장칼만필터를 적용하여 실험하였다. 본 실내위치측위시스템의 시스템모델은 선형이고 측정모델은 비선형이므로 효율적인 보정알고리즘인 확장칼만필터를 선택하고 실험은 MATLAB로 수행하였다. 실험결과 실내위치측위시스템의 정확도가 향상되었다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.6
• /
• pp.10-10
• /
• 2002

This paper introduces the high-resolution channel estimation technique which are used to estimate the first arrival multipath delay component. The proposed technique yields the precise estimate of the first time arrival which is directly related to the performance of TDOA-based position location. The proposed technique utilizes the transformed auto-correlation function of received common pilot signal in frequency domain, its samples compose the hermitian Toeplitz matrix at sequel. Then the time delay components could be estimated with precision by the analysis of eigen-structure of corresponding matrix. In this paper, obeying the modified CODIT model, the performance of the PR-IPDL(Pseudo Random-Idle Period Downlink) and TA-IPDL(Time Aligned-Idle Period Downlink considered as 3GPP position location technique will be exploited systematically through the computer simulations with applying the proposed technique.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.6
• /
• pp.268-276
• /
• 2002

This paper introduces the high-resolution channel estimation technique which are used to estimate the first arrival multipath delay component. The proposed technique yields the precise estimate of the first time arrival which is directly related to the performance of TDOA-based position location. The proposed technique utilizes the transformed auto-correlation function of received common pilot signal in frequency domain, its samples compose the hermitian Toeplitz matrix at sequel. Then the time delay components could be estimated with precision by the analysis of eigen-structure of corresponding matrix. In this paper, obeying the modified CODIT model, the performance of the PR-IPDL(Pseudo Random-Idle Period Downlink) and TA-IPDL(Time Aligned-Idle Period Downlink considered as 3GPP position location technique will be exploited systematically through the computer simulations with applying the proposed technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.413-423
• /
• 2017

In this paper, we propose a ultrasonic and RF-based indoor localization system. In previous work, various systems were proposed for indoor localization, but they have limitation in applicability due to time-synchronization, complexity, or accuracy. To overcome such problems, an indoor localization system with ultrasonic and RF is proposed. A transmitting system is composed of a pair of ultrasonic and RF transmitters and the receiving system is composed of multiple ultrasonic receivers and one RF receiver. The theoretical performance limitation is also analyzed. To verify localization performance, we have implemented a receiving systems and a transmitting system using Arduino modules. Experiments were performed in $2m{\times}2m{\times}2m$ space and the localization errors had a mean of 6.1cm and a standard deviation of 1.6cm.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.98-107
• /
• 2011

In this paper, we propose the location determination system of an agent mobile device using the information provided by the WLAN(Wireless LAN) infrastructure. This system is configured as a typical ESS(Extended Service Set)-type WLAN structure with real-time location positioning engine and thru AP(Access Point) controller. The positioning engine collects the information of agent devices using SNMP(Small Network Management Protocol) thru AP controller and utilize those information as Cell ID. for LBS(Location Based Service). In the result of a real office environment implementation, the average success rate of inter-AP roaming is measured to 62.5% and the duration time of the device information update within the AP is average of 11 second of time, which means this system is adaptable to the location based service of above average accuracy but somewhat less urgency.

• Journal of Internet Computing and Services
• /
• v.10 no.1
• /
• pp.159-173
• /
• 2009

Locations of positioned nodes as well as gathered data from nodes are very important because generally multiple nodes are deployed randomly and data are gathered in wireless sensor network. Since the nodes composing wireless sensor network are low cost and low performance devices, it is very difficult to add specially designed devices for positioning into the nodes. Therefore in wireless sensor network, technology positioning nodes precisely using low cost is very important and valuable. This research proposes Cooperative Positioning System, which raises accuracy of location positioning and also can find positions on multiple sensors within limited times. And this research verifies this technology is excellent in terms of performance, accuracy, and scalability through simulation.