• Journal of The Korean Association For Science Education
• /
• v.20 no.1
• /
• pp.174-182
• /
• 2000

In this study, the effects of grouping by communication apprehension level in cooperative learning strategy applied to general science class and the difference between high and low communication apprehension levels were investigated. Three classes (N=112) were randomly assigned to two cooperative and one traditional learning groups. Students in two cooperative learning classes were grouped into homogeneous and heterogeneous groups with respect to their communication apprehension levels based on the test score of students' communication apprehension. After the instructions concerning the matter for 11 class hours, achievement, self-esteem, motivation to learn science. and student's perception to lack about communication ability and expectation about receiving help in cooperative learning processes were examined. Two-way ANOVA results revealed that there were no main and interactive effects in the scores of the achievement test. However, significant main effect of the treatment was found in the scores of the relevance and the satisfaction among four motivation sub-categories. In post-hoc comparison, the scores of the heterogeneous group were found to be significantly higher than those of the control group. For expectation about receiving help in cooperative learning processes, the scores of the heterogeneous group were significantly higher than those of the homogeneous group. Students in high communication apprehension level had significantly lower self-esteem and more perception to lack about communication ability than students in low level.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1189-1193
• /
• 2010

Mobility management is one of the most important research issues in 6LoWPAN, Since the IP-WSN application domain is expanded to real-time applications such as healthcare and surveillance systems, a fast and seamless handover becomes an important criterion in 6LoWPAN. However, a draft of IETF 6LoWPAN WG for mobility support does not decrease handover delay. Although LoWMob supports a fast intra-PAN handover. it can be supported when the infrastructure node has the location information of the other nodes in the mobile node's moving direction. In this paper, we propose a fast and seamless mobility protocol to support intra-PAN handover, named intra-MARIO. In intra-MARIO, a parent node of the mobile node preconfigures its handover to the PAN when the parent node detects its movement, thereby reducing the handover delay. Since intra-MARIO also supports route optimization, the mobile node can communicate with its corresponding nodes through the optimal route. In this paper, we analysis the signaling cost and evaluates that the handover can be completed in 20ms by simulation.

• Proceedings of the Korean Association for Survey Research Conference
• /
• 2005.12a
• /
• pp.91-113
• /
• 2005

본 연구는 청년들의 취업 및 실업 경험이 정신건강에 어떠한 영향을 미치는지 종단적으로 알아보는 데 목적이 있다. 구체적으로 대학을 졸업하고 난 이후에 지속적으로 미취업 상태로 남아있는 사람들의 정신건강의 문제 그리고 취업에 성공하는 경험이 정신건강에 미치는 영향을 미치는지 알아보고자 한다. 이를 위해서 국내 대학교 4학년생들을 대상으로 1차 조사를 실시하고 이후 약 6개월 간격으로 2차 조사, 3차 및 4차 조사를 실시하였다. 네 시점에서 모두 응답자들의 취업여부와 정신건강 수준을 측정하였다. 4차 조사까지 모두 응답한 560명 중에서 2차, 3차, 및 4차 시점의 취업여부에 의해서 집단을 다음과 같이 나누었다: 2차, 3차 및 4차 시점 순서대로, 모두 취업 상태인 집단('취업-취업-취업 집단'), 3차 시점에서 취업에 성공한 집단('미취업-취업-취업 집단'), 4차 집단에서 취업에 성공한 집단('미취업-미취업-취업집단') 그리고 모두 미취업 상태인 집단('미취업-미취업-미취업 집단'). 그 결과를 보면, 취업-취업-취업 집단의 경우에는 취업에 성공한 2차 시점에서 정신건강 수준이 상당히 좋아졌다가 3차 및 4차 시점에서 다시 본래 수준으로 돌아가는 경향을 보였다. 미취업-취업-취업 집단의 경우에는 취업에 성공한 3차 시점 이후로, 미취업-미취업-취업 집단의 경우에는 취업에 성공한 4차 시점에서 정신건강 수준이 좋아지는 경향을 보였다. 지속적으로 미취업 상태였던 집단에서는 3차 시점에서 정신건강 수준이 상당히 나빠졌다가 여전히 미취업 상태인 4차 시점에서 오히려 완화되는 경향을 보였다. 본 연구의 시사점과 제한점 및 장래 연구의 과제가 논의되었다.iments and numerical analysis of luminescence efficiency in the hole carrier transport layer's thicknes. 나아갈 것이며, 아울러 향후에도 아직 미흡한 분야인 IT 아웃소싱에서 적정수준의 대가지급 방안 및 바람직한 Relationship 에 영향을 미치는 여러 가지 요인에 대해서도 살펴 봄으로써 IT분야의 Outsourcing을 검토하거나, 추진할 때 도움이 될 수 있도록 하고자 한다.개의 총 297개의 데이터를 추출하여 사용하였다. 실험과는 좌측공격 91.7%, 우측공격 100%, 중앙공격 87.5%, 코너킥 97.4%, 프리킥 75%로서 매우 양호한 인식율을 보였다. 사용경험정도가 가입직후 해지에만 영향을 미치는 요인임을 보여준다. 또한 매체의 정보전달 풍부성 (media richness)이 상대적으로 높은 소매점이나 웹사이트를 통해 서비스에 가입한 소비자일수록 가입 직후뿐만 아니라 서비스사용 이후에도 낮은 해지성향을 나타냈다. 이러한 분석결과를 바탕으로 인터넷전화 서비스에 적합한 고객지원 프로그램 설계와 마케팅 매체선정과 관련한 전략적 시사점을 도출한다. 그리고 국내에서 최근 이슈가 되고 있는 차세대 무선인터넷 서비스인 와이브로 출시에 따른 마케팅 및 고객관리와 관련된 시사점을 논의한다.는 교합면에서 2, 3, 4군이 1군에 비해 변연적합도가 높았으며 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다 이번 연구를 통하여 복합레진을 간헐적 광중합시킴으로써 변연적합도가 향상될 수 있음을 알 수 있었다.시장에 비해 주가가 비교적 안정적인 수준을 유지해 왔다고 볼

• Archives of design research
• /
• no.18
• /
• pp.25-34
• /
• 1996

Industrial design development methods and processes have changed in accordance with Industrial Information Age. These days, problems are created by existing methods and evaluation of design value , all problems concerned with time and finances sitaution have been made a subject of discussion. Development of design processes have been changed by the development of problem recognition and solving tools, and dpsign tpchnulugy havp hppn replaced by computer technology,Thus. software design processes linking thoughtware to hardware are used in the solution of design problems with many parts. In this study, 3D Modeling samples are presented, 3D Modeling can realise ' Ideas' to '3Dimentional Virtual Ohjects'. These effect and value are anle to decisively influence the process of design problem conference-ebealuation-solution.Proxesses of actual modeling and rendering are made as follows. By compusition of simple 20 drawings and shaping them into 30 objects, 30 solid models can be made. To prssent effectivley, we can make a sample model by varying camera views,light sourses,materials and colours etc. This sample is evaluated by various cumposition, methods and PERT(Program Evaluation and Review Technique). This cuncrete sample (tentative plan)is changed within the CAD SYSTEM by design evaluation, and then converted to flowchart of mass productive conception through refined data. So, that tentative plan can be conformed to design desire actuillly, to the utmost degree. Finally, this design process can be proposed as il new method in cuntrast with current methods. The aim of this study is to suggest effective evaluation methods of design outcome among many evaluating elements.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.552-557
• /
• 2015

Recent performed by recognizing a user's location, various services have been tailored focus on short-range wireless communication technology. A beacon in which is attracting attention as next-generation technology. Beacon is a terminal by utilizing the frequency of the non-audible area can not be bluetooth and human sending and receiving terminals and information, Apple recently iBeacon like a low-power Bluetooth (BLE; bluetooth low energy) based beacon showing a tendency to rise into the mainstream there. Services using a beacon is basically installs the terminal in a certain place indoor. It is characterized by providing the user the services to catch the user's position, even automatically take a separate action. Various types of location-based service provided by the target interior space began to attract attention. A variety of location-based services are provided in the interior space in order to be successfully deployed and provide guidance to the interior space, the movement route and the like are essentially required to build various types of information. In this paper, for efficient indoor positioning by varying the signal strength of the beacon in such areas were measured and analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.425-430
• /
• 2017

RFID is a technology that uses radio frequency to read information in tags attached to objects or people. Because it reads the information without contact when tracking the location using tags in a RFID system, there can be errors between the actual position and measured position. In this paper, three methods (the method of radiation pattern, the method of the median value, and the method using both the radiation pattern and median value) are proposed to identify the location of objects or people using the RFID technique. The location identification system based on RFID was constructed and tags were arranged in a square pattern. The real location and experimentally predicted location of an object containing a reader were compared to confirm the error. Instead of the existing papers that obtained the approximately location of a reader by calculating the center of gravity of all tags read by that reader, in this study, the predicted location was obtained by the median value and the radiation pattern. This study validated which method was the most efficient among the three methods proposed in this paper through the data of the read tags. As a result, the method of the median value had the smallest error among those assessed.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.4
• /
• pp.9-21
• /
• 2004

In this paper, we proposed the image hiding method which decreases calculation amount by encrypt partial data using discrete wavelet transform and linear scale quantization which were adopted as the main technique for frequency transform in JPEG2000 standard. Also we used the chaotic system which has smaller calculation amount than other encryption algorithms and then dramatically decreased calculation amount. This method operates encryption process between quantization and entropy coding for preserving compression ratio of images and uses the subband selection method and the random changing method using the chaotic system. For ciphering the quantization index we use a novel image encryption algerian of cyclically shifted in the right or left direction and encrypts two quantization assignment method (Top-down/Reflection code), made change of data less. Also, suggested encryption method to JPEG2000 progressive transmission. The experiments have been performed with the proposed methods implemented in software for about 500 images. consequently, we are sure that the proposed are efficient image encryption methods to acquire the high encryption effect with small amount of encryption. It has been shown that there exits a relation of trade-off between the execution time and the effect of the encryption. It means that the proposed methods can be selectively used according to the application areas. Also, because the proposed methods are performed in the application layer, they are expected to be a good solution for the end-to-end security problem, which is appearing as one of the important problems in the networks with both wired and wireless sections.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.84-93
• /
• 2011

In order to provide the real time and proper information to the pedestrian who is using the transport connection and transfer center through data collecting and processing process, the design of the test-bed (Gimpo airport)'s communication construction and the technology of the pedestrian location tracking has been researched. The design of the communication construction should make sure that it can provide believable data to the user of the transfer center. At the same time, the location tracking should also be considered, so that the require of the communication efficiency and the location tracking efficiency can be met together. In order to make the efficient location tracking technology, the problems related to the commercial technology based real time location identification will be resolved and the new approach method was proposed and be applied and analysed to the test-bed. The wireless access points can be located in the most real-world situation which has added the characteristics of the real building to the electronic map, and through the analysis of theirs location, they can be set as the mainly necessary points for the communication construction design and the location tracking and the method to locate that points has been proposed. How to set, how to apply it to the test-bed and the examination result will be introduced in this paper.

• Journal of Internet Computing and Services
• /
• v.18 no.4
• /
• pp.43-50
• /
• 2017

Embedded System includes touch, GPS, motion, and acceleration sensor, and can communicate with neighbor devices using wireless communication. Because Arduino with embedded system provides good environment for development and application, developers, engineers, designers, as well as artists, students have a great interest. They utilize Arduino in the robot, home appliances, fashion, culture and so on. In this paper, we design and implement a game using Arduino with embedded system which recognizes the human movement by moving away from one-dimensional game of the existing touch method. Implemented embedded system game measures gyro-sensor to recognize human movement and detects the attack success of the opponent by using touch sensor. Moreover, health of the game player is updated in the real time through the android phone-based database. In this paper, implemented embedded system-based game provides GUI screen of android phone. It is possible to select watching mode and competition mode. Also, it has low energy consumption and easy to expand because it send and receive data packet through recent Bluetooth communication.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.1010-1019
• /
• 2008

In this paper, we present a noise analysis and measurement results of a bio-radar system that can detect human heartbeat and respiration signals. The noise analysis including various phase noise effects is very important in designing the bio-radar system, since the frequency difference between the received signal and local oscillator is very small and the received power is very low. All of the noise components in a bio-radar system are considered from the point of view of SNR. From this analysis, it can be concluded that the phase noise due to antenna leakage is a dominant factor and is a function of range correlation. Therefore, the phase noise component with range correlation effect, which is the most important noise contribution, is measured using the measurement setup and compared with the calculated results. From the measurement results, our measurement setup can measure a closed-in phase noise of a free-running oscillator. Based on these results, it is possible to design a 2.4 GHz bio-radar system quantitatively which has a detection range of 50 cm and low power of 1 mW without additional PLL circuits.