• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.2056-2063
• /
• 2012

In a port terminal, containers are stored and transshipped by yard tractors and crane vehicles. For operation efficiency of the terminal, location information of these vehicles is an essential factor. However, most of port terminals try to estimate location of these assets using indirect methods such as event tracking of shipping or unshipping containers. Because these kinds of events are rarely occurred, location of the event includes seriously locating error compared to a real location of vehicle. In this paper, we propose a real-time asset tracking system to obtain accurate and reliable location of terminal assets. The proposed system overcomes a location estimation error caused by container stacks which interrupt wireless communication. In order to mitigate uncertainty and increase accuracy of location estimation, we designed hardwares and multi-step locating system to resolve additional preblems. We implemented system components, and installed these at a port environment for evaluation. The result shows superiority of the system that the accuracy is approximately 5.87 meters (CEP).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.21-28
• /
• 2016

We propose an adaptive scheme of a differential codebook for temporally correlated channels. And the codeword entries of the propose codebook are selected among the set of M-PSK constellations - the values of M proposed in this paper are 8, 16, or 32. Firstly, we analyze mathematically how the optimal spherical cap radius of the proposed codebook is tracked. Then, we explain the practical implementation of the proposed adaptive method. Practically, some candidate differential codebooks we propose in this paper can be switched according to the temporal correlation coefficients of wireless channels in the proposed scheme. Monte-Carlo simulations demonstrate that the achievable throughput performance employing the proposed codebook is always superior to those of the differential codebooks employing M-PSK constellations and non-adaptive differential codebooks with the same amount of feedback information.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.959-968
• /
• 2019

In the agricultural industry, wireless sensor network technology has being applied by utilizing various sensors and embedded systems. In particular, a lot of researches are being conducted to diagnose diseases of crops early by using sensor network. There are some difficulties on traditional research how to diagnose crop diseases is not practical for agriculture. This paper proposes the algorithm which enables to investigate and analyze the crop leaf image taken by image camera and detect the infected area within the image. We applied the enhanced k-means clustering method to the images captured at horticulture facility and categorized the areas in the image. Then we used the edge detection and edge tracking scheme to decide whether the extracted areas are located in inside of leaf or not. The performance was evaluated using the images capturing tomato leaves. The results of performance evaluation shows that the proposed algorithm outperforms the traditional algorithms in terms of classification capability.

• The KIPS Transactions:PartC
• /
• v.18C no.5
• /
• pp.303-316
• /
• 2011

Data aggregation is important in wireless sensor networks. However, it also introduces many security problems, one of which is that a compromised node may inject false data or drop a message during data aggregation. Most existing solutions rely on encryption, which however requires high computation and communication cost. But they can only detect the occurrence of an attack without finding the attacking node. This makes sensor nodes waste their energy in sending false data if attacks occur repeatedly. Even an existing work can identify the location of a false data injection attack but it has a limitation that at most 50% of total sensor nodes can participate in data transmission. Therefore, a novel approach is required such that it can identify an attacker and also increase the number of nodes which participate in data transmission. In this paper, we propose a monitoring-based secure data aggregation protocol to prevent against a compromised aggregator which injects false data or drops a message. The proposed protocol consists of aggregation tree construction and secure data aggregation. In secure data aggregation, we use integration of abnormal data detection with monitoring and a minimal cryptographic technique. The simulation results show the proposed protocol increases the number of participating nodes in data transmission to 95% of the total nodes. The proposed protocol also can identify the location of a compromised node which injects false data or drops a message. A communication overhead for tracing back a location of a compromised node is O(n) where n is the total number of nodes and the cost is the same or better than other existing solutions.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.3
• /
• pp.1-8
• /
• 2015

The most used smart set-top box in home driven by the Android OS and based on Wi-Fi technology has to ensure nothing wrong with the Wi-Fi service regardless of the various user's installation environment. The direction test method about the nondirectional of the Wi-Fi doesn't be determined as the standard and each manufacturers devise the their own test methods and conduct the tests. In this paper, we created the 720 test cases considering 2 components of upload & download, the 10 elements of the vertical angle and the 36 elements of the horizontal angle looking at the wireless router in order to verify omni-directional Wi-Fi capability. In reality, from viewpoint in terms of cost and time constraint, it is difficult to test all the test cases. Therefore, we decided to reduce test cases by applying Pair-wise testing technique which is one of combinational testing techniques based on ISO / IEC 29119-4. And we obtained the test cases in which the Pair-wise technique was applied by Allpairs tool which output test cases automatically and conducted the test. It could be confirmed that the proposed technique shortened 48.61% of the time to be spent in progressing the existing test cases and that the trace about the part in which the problem was generated with the result of the simplified test case was possible enough.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.7
• /
• pp.989-998
• /
• 1993

In a bursty user traffic mode, ALOHA random multiple access protocol achieves higher performance than any conventional fixed assignment technique. One of central problems in slotted ALOHA is synchronization. Because of the long propagation delay in satellite mobile communication, packet may be spilt over into adjacent slots and thus guard time may be included between packet intervals. In conventional ALOHA channels, simultaneous transmission by two or more users results in a collision : the unsuccessful packets have to be retransmitted according to some retransmission algorithm. However, in a radio environment, users are often at different distances from the receiver : therefore, their received signals have substantially different power levels. The packet arriving with the highest energy now has a good chance of being detected accurately. Similarly, in some spread-spectrum random access systems, the earliest arriving packet dominates later arriving packets and thus captures the channel. In this paper slotted ALOHA channel with non zero guard time and capture probability is studied. Using the Markovian model, the performance of slotted ALOHA with guard time and capture effects is derived and compared with that of the conventional ALOHA via numerical analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.4
• /
• pp.371-377
• /
• 2013

Fishing boats more than 5 tons is obliged to VHF DSC by Fishing Vessels Act and Vessel Safety Act. The owner of the fishing vessel is equipped to the automatic position reporting device in accordance with the Notice of the Minister of Land, Transport and Maritime Affairs to regulations, shall be ensure to navigations safety and in order to respond quickly in the event of maritime accidents on fishing vessels. East sea set up to start in 2012, which is now underway the annual install plain to the yellow sea and the south sea for VHF coast stations. It is web-based remote operation of DSC on the remote control and monitoring in Fishery Information Communication Station for the coastal VMS construction project. All fishing vessels is VHF DSC in conjunction with the GPS that location information transmitted to the coast station. automatically by the DSC call. This paper has been studied on the communications coverage set up and traffic operation for realization a roaming service by navigation route tracking and RSSI techniques in parallel algorithm refer to VHF DSC coast stations in east sea.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.96-101
• /
• 2003

Korea Sounding Rocket(KSR)-III onboard telemetry system has acquired various data from subsystems and sensors in the rocket, and radiated PCM/FM data using two S-band antennas during the flight. Simultaneously， it is necessary that the ground receiving systems track the rocket, and receive and decode telemetry data. Also post processed telemetry data are needed to be broadcasted on ethernet network in real time. Range safety display system displays flight trajectory using telemetry data in mission control center, and so flight manager makes a decision for flight termination from the trajectory This paper describes operating technique about telemetry reception, the development for the realtime data processing system, and the results for telemetering reception on fight test. We telemetered, processed, and broadcasted numerous telemetry data during the flight test successfully.

• The KIPS Transactions:PartD
• /
• v.10D no.1
• /
• pp.45-56
• /
• 2003

In the wireless environment, according to the development of technology, which is able to obtain location information of spatiotemporal moving object, the various application systems are developed such as vehicle tracking system, forest fire management system and digital battle field system. These application systems need the data model, which is able to represent and process the continuous change of moving object. However, if moving objects are expressed by a relational model, there is a problem which is not able to store all location information that changed per every time. Also, existing data models of moving object have a week point, which constrain the query time to the time that is managed in the database such as past or current and near future. Therefore, in this paper, we propose a data model, which is able to not only express the continuous movement of moving point and moving region but also process the operation at all query time by using shape-change process and location determination functions for past and future. In addition, we apply the proposed model to forest fire management system and evaluate the validity through the implementation result.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1B
• /
• pp.86-97
• /
• 2009

RTLS is a system for automatically locating and tracking people and objects. The TDOA-based RTLS determines the location of the tag by calculating the time differences of a signal received from the tag. In TDOA-based RTLS, time synchronization is essential to calculate the time difference between readers. This paper presents a precision time synchronization method for TDOA-based RTLS over IEEE 802.15.4. In order to achieve precision time synchronization in IEEE 802.15.4 radio, we analyzed the error factors of delay and jitter. We also deal with the implementation of hardware assisted time stamping and the Kalman filtering method to minimize the error factors. In addition, this paper described the experiments and performance evaluation of the proposed precision time synchronization method in IEEE 802.15.4 radio. The results show that the nodes in a network can maintain their clocks to within 10 nanoseconds offset from the reference clock.