• Title/Summary/Keyword: 무릎 인공관절

Search Result 33, Processing Time 0.03 seconds

Strength Evaluation of Sin91e-Radius Total Knee Replacement (TKR) (인공무릎관절의 단축법위 회전시 근력정가)

  • Wan, Jin-Young;Sub, Kwak-Yi
    • Journal of Life Science
    • /
    • v.14 no.3
    • /
    • pp.484-489
    • /
    • 2004
  • Artificial joint replacement is one of the major surgical advances of the 21th century. The primary purpose of a TKA (Total Knee Arthroplasty) is to restore normal knee Auction. Therefore, ideally, a TKA should: (a) maintain the natural leverage of the knee joint muscles to ensure generating adequate knee muscle moments to accomplish daily tasks such as rising from a chair or climbing stairs;(b) allow the same range of motion as an complete knee; and (c) provide adequate knee joint stability. Four individuals (2 peoples after surgery one year and 2 peoples after surgery three years) participated in this study. All they were prescreened for health and functional status by the same surgeon who performed the operations. Two days of accommodation practice occurred prior to the actual strength testing. The isometric strength (KIN-COM III) of the quadriceps and hamstring were measured at 60$^\circ$ and 30$^\circ$ of knee flexion, respectively. During isokinetic concentric testing, the range of motion was between 10$^\circ$ to 80$^\circ$ of knee flexion (stand-to-sit) and extension (sit-to-stand). for a given test, the trial exhibiting maximum torque was analyzed. A 16-channel MYOPACTM EMG system (Run Technologies, Inc.) was used to collect the differential input surface electromyographic (EMG) signals of the vastus medialis (VM), vastus lateralis(VL), rectus femoris (RF) during sit-to-stand and stand-to-sit tests. Disposable electrodes (Blue SensorTM, Medicotest, Inc.) were used to collect the EMG signals. The results were as follows; 1. Less maximum concentric (16% and 21% less for 1 yew man and 3 years mm, respectively) and isometric (12% and 29%, respectively) quadriceps torque for both participants. 2.14% less maximum hamstrings concentric torque for 1 year man but 16% greater torque for 3 years mm. However, 1 year man had similar hamstring isometric peak torque for both knees. 3. Less quadriceps co-contraction by 1 year man except for the VM at 10$^\circ$-20$^\circ$ and 30$^\circ$-50$^\circ$ range of knee flexion.

Analytical Study on Durability due to the Load of Artificial Knee Joint (무릎인공관절의 하중에 따른 내구성에 관한 해석적 연구)

  • Cho, Jae-Ung
    • Journal of the Korea Convergence Society
    • /
    • v.5 no.2
    • /
    • pp.7-11
    • /
    • 2014
  • The artificial joint is consisted with the upper structure of tungsten alloy steel and the lower part of polyethelene are applied with load. When this joint is applied with load in this study, the load distribution at the joint and the stress distribution of support hole to install the joint are investigated by finite element analysis. These results can be utilized at obtaining the basic material to have the experiment for the real thing. The crack is initiated as the load is concentrated at the end of corner on the upper structure. This behavior is in accord with a case of tissue damage due to the breakage of artificial joint reported at medical science.

A Simulation Study on the Stress Distribution of the Transplanting Part of Artificial Knee Joint due to Elastic Modulus (탄성계수에 따른 무릎 인공관절 이식 부품의 응력분포에 관한 시뮬레이션 연구)

  • Lee, J.H.;Hwang, G.W.;Cho, J.U.;Cheon, Seong S.
    • Composites Research
    • /
    • v.28 no.3
    • /
    • pp.89-93
    • /
    • 2015
  • This study analyzes the transplanting parts used as the graft of artificial knee joint. The low elastic titanium alloy is applied to clear up the stress shield effect. The simulation analysis is carried about the stress distribution of the transplanting parts. The correlation with frame is inferred and investigated through the equivalent stress distribution of titanium alloy due to elastic modulus. The stress of the transplanting parts decreases as the elastic modulus decreases at the first time. It decreases greatly near the stress of 46 GPa and increases again. Because the stress happened at the transplanting parts decreases, more stress is applied on the frame. This phenomenon is the stress shield effect. The result of this study can be thought to be necessary to develop the safe design of composite material.

Biomechanical and Physiological Comparative Analysis of the Single-Radius Knee Arthroplasty Systems and Multi-Radius Knee Arthroplasty Systems (무릎인공관절 단축범위(Single-Radius) 수술자와 다축범위(Multi-Radius) 수술자의 운동역 학적 및 운동생리학적 비교분석)

  • Jin, Young-Wan;Kwak, Yi-Sub
    • Journal of Life Science
    • /
    • v.18 no.11
    • /
    • pp.1532-1537
    • /
    • 2008
  • The purpose of this study was to investigate the effect of different arthroplasty designs on knee kinematic and lower limb muscular activation for up-stair and down-stair movement. 3-D video analysis of whole body and joint kinematics and EMG analysis of quadriceps and hamstrings were conducted. One-way ANOVAs were used for statistical analyses (p=0.05). The single-radius group exhibited more arthroplasty limb quadriceps EMG and hamstring coactivation EMG than the multi-radius group. Single-radius demonstrated more abduction angular displacement and reached peak abduction earlier than the multi-radius arthroplasty limb. The single- radius the percent body fat showed similar values in the Elderly, Single and Multi-radius group among the periods, however Control group was Lowered among the periods. Single-radius group limb also increased the quadriceps muscle activation level to produce more knee extension moment to compensate for the short quadriceps moment arm. Resting metabolic rate was significantly increased in control group in the period of LI. Energy expenditure was extremely increased in all groups except control group among the periods. We can say this is the exercise effects.

Surgical Simulation Environment for Replacement of Artificial Knee Joint (CT 영상을 이용한 무릎관절 모의 치환 시술 환경)

  • Kim, Dong-Min
    • Journal of IKEEE
    • /
    • v.7 no.1 s.12
    • /
    • pp.119-126
    • /
    • 2003
  • This paper presents a methodology for constructing a surgical simulation environment for the replacement of artificial knee join using CT image data. We provide a user interface of preoperative planning system for performing complex 3-D spatial manipulation and reasoning tasks. Simple manipulation of joystick and mouse has been proved to be both intuitive and accurate for the fitness and the wear expect of joint. The proposed methodology are useful for future virtual medical system where all the components of visualization, automated model generation, and surgical simulation are integrated.

  • PDF

등산으로 인한 근육ㆍ골격계 질환

  • Korea Mechanical Construction Contractors Association
    • 월간 기계설비
    • /
    • no.10 s.183
    • /
    • pp.99-100
    • /
    • 2005
  • 등산은 누구나 손쉽게 즐기는 국민 스포츠이다. 그러나 생각만큼 간단한 운동은 아니다. 의욕만 앞세우다 자칫 발목이나 무릎 관절에 무리를 줄 수 있으며, 심한 경우 관절이나 관절 주변 조직이 찢어져 수술을 받아야 한다. 관절이나 주변 조직의 부상은 만성 관절염으로 연결되기 쉬우며, 만성 관절염은 노후 인공관절 수술을 받게 되는 가장 큰 원인이 된다. 이번 호에서는 등산으로 인한 근육∙골격계 질환에 대해서는 알아보기로 한다. 이 내용은 동아일보에 게재된 내용을 발췌 정리한 것이다.

  • PDF

A Biomechanical Comparative Analysis between Single-Radius and Multi-Radius Total Knee Arthroplasty for Sit-to-Stand Movement (앉았다 일어나는 동작동안 단축회전반경 무릎인공관절 수술자와 다축회전반경 무릎인공관절 수술자의 운동역학적 비교분석)

  • Jin, Young-Wan
    • Journal of Life Science
    • /
    • v.16 no.5
    • /
    • pp.773-779
    • /
    • 2006
  • Eight of the individuals had a unilateral S-RAD TKA and Multi-Radius TKA ($Scorpio^{TM}$ PS, Howmedica-Osteonics, Inc.). The instrument were used Peak Motion Measurement $System^{TM}$, $MYOPAC^{TM}$EMG System, KIN-COM $III^{TM}$ System. The Figure 3 shows that the average time for the S-RAD group to accomplish the sit-to-stand movement was 1.59 s, which was 0.19 s less than the M-RAD group (p= 0.033). In Figure 5, the S-RAD TKA group tended to have $7^{\Omega}{\cdot}S^{-1}$ less trunk flexion velocity than that of the M-RAD group (p= 0.058). The Figure 6 shows that the S-RAD TKA limb tended to have less ADD displacement (p = 0.071) than that of the M-RAD TKA limb. We failed to find significant differences for ABD and ADD displacements between the S-RAD and M-RAD N-TKA limbs (p= 0.128 and 0.457, respectively). The VM of the S-RAD TKA limb demonstrated significant less RMS EMG than that of the M-RAD TKA limb from $60^{\Omega}$ to $15^{\Omega}$ of knee flexion (p 0.05). The VL of the S-RAD TKA limb also demonstrated significant less RMS EMG than that of the M-RAD TKA limb from $60^{\Omega}$ to $45^{\Omega}$ of knee flexion (p 0.05). Similar to the VM and VL, the RF of the S-RAD TKA limb showed less RMS EMG than that of the M-RAD TKA limb from $60^{\Omega}$ to $30^{\Omega}$ of knee flexion (p 0.05).

A New Fitness Index for Simulated Implantation System of Artificial Hip Joint based on 3D Medical Images (3차원 의료영상에 기반한 인공고관절 모의시술 시스템 개발 및 새로운 정합도 측정 방법에 관한 연구)

  • 김용호;김중규;최귀원
    • Journal of Biomedical Engineering Research
    • /
    • v.21 no.2
    • /
    • pp.201-212
    • /
    • 2000
  • 본 논문에서는 인공고관절과 환자의 고관절 부위를 각각 3차원 영상화한 후에 이들의 정합도 (fitness)를 측정하여 수치적인 정보로 제공함으로써 환자의 체형에 적합한 인공고관절을 선택하고, 더 나아가 정확한 시술방향과 시술깊이를 제공할 수 있는 모의시술시스템을 제시하였다. 이를 위해 region growing 기법등을 이용하여 환자의 CT 영상을 3차원화하고, 또한 인공고관절을 projection 기법 등을 통해 3차원 영상화하였으며, 지금까지 인공고관절 정합도 측정에 사용했던 단순한 단면적 비교방식과는 달리 삽입의 균일성도 가늠할 수 있는 새로운 정합도 측정 방식을 고안하여 적용하였다. 다양한 실험과 분석을 통하여 새로 제안한 정합도 측정 방법의 정확성과 우수함을 확인할 수 있었으며, 본 논문에서 제시하는 모의 시술시스템은 향후 정형외과 분야에서 인공무릎과 같은 다른 영역에서의 시술 보조 시스템으로도 응용될 수 있을 뿐만 아니라, 인공관절의 국산화 및 주문제작 등에성도 많은 활용을 할 수 있을 것으로 기대된다.

  • PDF

Comparison of the Postoperative Pain Control Effects of a Buprenorphine Transdermal Patch on Total Knee Arthroplasty Surgery Patients according to Its Applied Sites: Retrospective Case-Control Study (슬관절 인공관절 전치환술 환자에서 부프레노르핀 경피 패치의 적용부위에 따른 수술 후 통증 조절 효과 비교: 후향적 환자-대조군 연구)

  • Kim, Ok-Gul;Lee, Sang-Wook;Kim, Hyun-Min
    • Journal of the Korean Orthopaedic Association
    • /
    • v.55 no.6
    • /
    • pp.527-533
    • /
    • 2020
  • Purpose: This study compared the effects of a buprenorphine transdermal patch (BTDP) on the chest and knee for pain control after total knee arthroplasty (TKA). Materials and Methods: A retrospective case-control study was conducted from August 2018 to August 2019 on 231 patients who underwent TKA. Two hundred cases were selected considering age, sex, and body mass index. Before and after applying the BTDP, the Numeric Rating Scale (NRS), adverse effects and compliance were measured. All measurements in the chest application group (group A=100) and knee application group (group B=100) were compared. Results: NRS was similar in rest between the groups treated with BTDP, but at two days and three days afternoon, five, six, and seven days postoperatively in group B, the NRS was significantly lower than that of group A. The adverse effects of the central nervous system and gastrointestinal system after applying BTDP were significantly lower in group B than in group A. No significant differences in adverse effects of the cardiovascular system and skin were observed between the two groups. Regarding the maintenance of BTDP, group B was significantly higher than group A. Conclusion: The direct application of BTDP after TKA to painful knee joints showed excellent results in early postoperative pain control and can be a useful method for increasing patient compliance by reducing the frequency of adverse effects.