• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.131-139
• /
• 2012

The exothermic cure kinetics of epoxy resin was controlled by hardener containing fast and slow curing agents. The epoxy risen comprises hydrogenated bisphenol A-based epoxide (HBA), fast curing agent (FH) and slow curing agent poly(propyleneglycol)bis(2-aminopropylether) (SH). Talc was used as an inorganic additive. In the process of curing, cure kinetics along with temperature was monitored by differential scanning calorimeter (DSC) and thermocouple to show that the temperature increase was well controlled by adjusting the hardener mixture. Additionally, bending and tensile strengths of the epoxy/talc composites were also measured to be lower and higher with the amount of the talc inorganic additive, respectively. It is thus concluded that the increase in the temperature during exothermic curing reaction and mechanical properties of epoxy resins are tuned by optimizing hardener mixture for successful stone conservation.

• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.265-276
• /
• 2012

Physicochemical properties of HBA epoxy resins were controlled by varying hardener mixture and reactive diluent to improve applicability for stone conservation. The epoxy risen comprises hydrogenated Bisphenol-A based epoxide (HBA), fast curing agent (FH), slow curing agent poly(propyleneglycol)bis(2- aminopropylether) (SH) and difunctional polyglycidyl epoxide (DPE). Talc was used as an inorganic additive. The changes in viscosity and temperature during curing reactions depending on the composition of the epoxy resins were investigated. Additionally, bending, tensile and adhesive strengths were measured to identify the effective mechanical strength in stone conservation. Finally various compositions of epoxy resin/inorganic additives were developed for stone conservation by controlling cure kinetics and mechanical properties.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.192-192
• /
• 2003

오염된 폐수를 처리하는 과정으로 다양한 방법이 사용되고 있으나, 담체를 이용하여 미생물을 배양하고, 미생물에 의해 정수하는 방법이 이용되고 있다. 이를 위해서는 미생물을 배양을 위한 담체의 조건으로 다양한 크기의 연속기공을 갖고, 젖음성과 표면거칠기가 높으며, 이들 중 초기 미생물번식의 조건을 제공하는 기체 포집용 미세기공을 보유하고, 미생물이 성장할 수 있는 수백 $\mu\textrm{m}$까지의 다양한 크기의 연속된 기공을 갖는 미생물 담체용 다공성 세라믹스의 제조를 목적으로 본 연구를 행하였다. 본 연구는 다양한 크기의 기공분포를 형성하기 위하여 첨가물로 activated carbon과 무기염, 고분자 binder를 활성알루미나 기지재료에 사용하여 수열반응에 의해 각각의 물질이 형성할 수 있는 기공의 크기를 확인하고, 수 nm에서 수백 $\mu\textrm{m}$까지의 연속된 기공이 존재하는 담체를 제조하였다. 수열조건과 첨가물의 양에 따라 수은침투가압을 이용하여 기공의 크기와 분포를 측정하고 평균기공률을 얻을 수 있었고, 압축강도를 측정하고, 기공의 형상을 주사전자현미경을 통해 확인하였다.

• Composites Research
• /
• v.19 no.6
• /
• pp.32-37
• /
• 2006

This paper summarizes the processing inorganic continuous fibers from Korean minerals. Continuous filament fibers have been produced from two rocks, basalt and quartz diorite porphyry(QDP), by melting method. The essence of the method is that the vitrified materials was placed into the bushing, platinum/rhodium alloy crucible with a nozzle, and heated electrically to a temperature which allowed fiber spinning. Vitrified basalt without additive was suitable for producing continuous filament fiber. However doping quartz diorite porphyry with boric oxide yielded a material which could be pulled continuously.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.58-64
• /
• 2004

The shrinkages of injection molded parts are different in molding operational conditions, resins and additives. The shrinkage of injection molded part for crystalline polymer, PBT (polybutylene terephthalate) has been studied for various operational conditions of injection molding and content of additives. Mica was used as a additive to PBT to examine the part shrinkage according to the mica content. The part shrinkages of mica contained PBT decreased as mica content increases. Higher injection temperature and injection pressure resulted in a lower shrinkage. As mold temperature increases the part shrinkage decreased. The part shrinkage of flow direction was less than that of the perpendicular direction to the flow for both pure and mica contained PBT. However the shrinkage difference between flow and perpendicular to flow directions decreased as mica content increased.

• The Korean Journal of Mycology
• /
• v.24 no.4 s.79
• /
• pp.274-279
• /
• 1996

An isolate of Lepista nuda was cultivated on the solid media consisted of various cereal grains or those of the acacia sawdust mixed with other cereal grains. The mycelia grew well on the solid cultures made from millet cereals, but did not on those from sorghum or corn cereals. Thus, the millet and the acacia sawdust, as the solid media, were employed for the next experiments related to mycelial growths. For growth of this isolate, it was shown that the nitrogen source is needed for those of millet. Also, the rice bran or minerals were considered to be needed for the acacia sawdust. As minerals, however, the rice bran is shown as the best additive in the solid cultures of the acacia sawdust. The mycelia of L. nuda were cultivated directly through the solid cultures. Their growths were measured' by the production of carbon dioxide with gas chromatography.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.183-187
• /
• 1991

The effects of microwave heat treatment and addition of enzyme, kimchi liquid, buffer solution and several salts on the changes in pH of kimchi liquid were investigated during fermentation at $25{\sim}35^{\circ}C$. It was found that microwave heat treatment on brined chinese cabbage and enzyme addition of cellulase and amylase showed a little improvement effect, while combination of both methods significantly increased the fermentation rate. The addition of kimchi liquid having pH 4.6 was found to be very desirable for both shortening the fermentation time and flavor acceptance. Among the inorganic salts and buffer solution studied, phosphate buffer(pH 4.6), sodium nitrite and $Na_2HPO_4$ were significantly effective for reduction of kimchi fermentation rate by two to three folds.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.1
• /
• pp.40-46
• /
• 2007

A qualitative investigation Dongchunghacho, Jelly combined with sericultural products prepared from assorted increments(0.5, 1, 1.5 and 2%) of P. japonica powder was performed. The qualitative parameters used to assess P. japonica powder increments included, hysicochemical, textural and sensory properties. The moisture and crude protein content of the Dongchunghacho Jelly were significantly greater than the control(p<0.05). Conversely, Dongchunghacho Jelly showed a propensity towards lower crude fat content than the control group. A positive trend was observed for both mineral content and dark color with increased P. japonica powder. In contrast, texture, hardness, gumminess and chewiness of the Dongchunghacho Jelly decreased with increasing levels of P. japonica powder. Color, taste, texture and overall preference of Dongchunghacho Jelly were optimal in the 1 % P. japonica powder mixture.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.655-662
• /
• 2017

Sulfide photocatalysts, CdS and CdZnS, were synthesized using a simple precipitation method and their photocatalytic activities were evaluated by the degradation of rhodamine B under visible light irradiation. The effects of four inorganic salt additives, KCl, NaCl, $K_3PO_4$, and $Na_3PO_4$, on the photocatalytic reaction were examined and the role of $K^+$, $Na^+$, $Cl^-$ and $PO_4{^{3-}}$ ions during photocatalytic reaction was discussed. The added inorganic salts were shown to have a remarkable effect on the photocatalytic reaction. It was also found that the anions in inorganic salts have a much more profound effect on the reaction rate, as compared to the cations. Under the present experimental conditions, $PO_4{^{3-}}$ revealed a significant inhibitory effect on the degradation rate whereas $Cl^-$ enhanced the rate slightly. This work pointed out that the consideration of additive effects is needed in the photocatalytic reaction for wastewater treatment.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.375-387
• /
• 2012

The objective of this study is investigation of contamination levels and assessment of health risk effects of heavy metals in herbal pills. 31 Items and 93 samples were obtained for this investigation from major herbal medicine producing areas, herbal markets and on-line supermarkets from Jan to Jun in 2010. Inductively coupled plasma mass spectrometer method was conducted for the quantitative analysis of Pb, Cd and As. In addition, the mercury analyzer system was conducted for that of Hg without sample digestion. The average contents of heavy metals in samples were as follows : 0.87 mg/kg for Pb, 0.08 mg/kg for Cd, 2.87 mg/kg for As and 0.16 mg/kg for Hg, respectively. In addition, the average contents of heavy metals in different parts of plants, including cortex, fructus, herba, radix, seed, algae and others were 0.63 mg/kg, 3.94 mg/kg, 1.42 mg/kg, 1.05 mg/kg, 0.16 mg/kg, 22.31 mg/kg and 10.17 mg/kg, respectively. After the estimations of dietary exposure, the acceptable daily intake (ADI), the average daily dose (ADD), the provisional tolerable weekly intake (PTWI) and the relative hazard of heavy metals were evaluated. As the results, the relative hazards compared to PTWI in samples were below the recommended standard of JECFA as Pb 3.1%, Cd 0.9%, Hg 0.5%. Cancer risks through slope factor (SF) by Ministry of Environment Republic Korea and Environmental Protection Agency was $4.24{\times}10^{-7}$ for Pb and $3.38{\times}10^{-4}$ for As (assuming that the total arsenic content was equal to the inorganic arsenic). Based on our results, possible Pb-induced cancer risks in herbal pills according to parts used including cortex, fructus, herba, radix, seed, algae and others were $1.95{\times}10^{-7}$, $1.45{\times}10^{-6}$, $2.14{\times}10^{-7}$, $6.27{\times}10^{-7}$, $1.99{\times}10^{-8}$, $3.61{\times}10^{-7}$ and $9.64{\times}10^{-8}$, respectively. Possible As-induced cancer risks in herbal pills by parts used including cortex, fructus, herba, radix, seed, algae and others were $1.54{\times}10^{-5}$, $7.24{\times}10^{-5}$, $1.23{\times}10^{-4}$, $2.02{\times}10^{-5}$, $3.25{\times}10^{-6}$, $2.18{\times}10^{-3}$ and $5.67{\times}10^{-6}$ respectively. Taken together, these results indicate that the majority of samples except for some samples with relative high contents of heavy metals were safe.