• Journal of the Korean Wood Science and Technology
• /
• v.25 no.4
• /
• pp.75-91
• /
• 1997

Laser cutting tests were conducted to investigate the laser cutting characteristics of solid woods such as 25mm-thick white oak(Quercus acutissima) and maple(Acer mono), and wood-based panels such as 15mm-thick medium density fiberboard and particleboard. Test variables were laser power, cutting speed, grain direction, and moisture content. Cutting depths, kerf widths and the maximum cutting speed were measured. Cutting depths were increased as focus of laser beam was moving from above the workpiece to on the surface of workpiece, and also to below the workpiece. Kerf widths were decreased as focus of laser beam was moving from above the workpiece to on the surface of workpiece, but were increased as focus of laser beam was moving from on the surface of workpiece to below the workpiece. Minimum kerf widths were obtained when focus of laser beam was positioned on the surface of workpiece. Cutting depths and kerf widths were decreased with increase in moisture content, and cutting depths and kerf widths of more dense white oak were smaller than those of maple. And also cutting depths and kerf widths of particleboard were smaller than those of medium density fiberboard.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.61-68
• /
• 2014

The energy efficiency of papermaking process becomes more significant because of various new regulation of the energy consumption and the green house gas emission. In this study, the effects of wood powder addition on the drainage and the drying efficiency of the OCC based paper products, linerboard, were deeply investigated for improving energy efficiency. The fractionation of wood powder depending on the size were conducted. The bigger size of wood powder resulted in the higher bulk and the higher drainage efficiency, but the lower paper strength. The drying efficiency were in detail evaluated depending on the drying process level. In the first section of drying process until the 80% solid level, there were no significant changes in the drying efficiency by the addition of wood powder. However, after the 80 % solid level, the drying efficiency was greatly improved by the addition of wood powder. Those results showed the addition of wood powder could greatly affect not only the drainage in forming and wet pressing but also the drying process.

• Conservation Science in Museum
• /
• v.11
• /
• pp.43-48
• /
• 2010

Excavated lacquer wares can be divided into waterlogged lacquer wares supersatuated with moisture and dry lacquer wares with little moisture. This conservation was done with dry damaged lacquer wares excavated from Daho-ri. Lacquer ware artifacts with lacquer fragments and no surface material remaining were processed using the three following methods. The three methods are reinforcing while sustaining three-dimensional form; reinforcing with earth after cleansing so that fragments are revealed due to weak lacquer fragments; and reinforcing the whole lacquer ware or parts by connecting and supporting missing parts with rayon paper, an artificial fiber paper, if the form cannot be sustained only with lacquer fragments.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.97-110
• /
• 2005

This paper is the second part of a literature review describing the current status of biomass energy use in the USA. The bioenergy technologies that convert biomass resources to a form of energy were presented, in particular focused on existing coal fired boiler, high efficiency gasification combined cycle. We presented latest biomass power energy supply, economic issues such as its production and plant investment cost in the Part I. In the Part II, our review summarized policy and market issues for electricity consumers, benefits from biomass power which could offer an alternative to conventional energy sources in the form of environmental, rural economic growth, and national energy security in the USA.

• Fire Science and Engineering
• /
• v.26 no.4
• /
• pp.18-23
• /
• 2012

After produce the extracted wood to silicic acid gel, sodium carbonate and silicon dioxide with application of the making method for carbon dioxide, ignition time, ignition temperature, mass loss rate and critical heat flux are measured according to external radiation source (20, 25, 35 and 50 $kW/m^2$). From the results, pressure impregnation wood to use with water glass and carbon dioxide has fire retardant performance at heat flux (less than 20 $kW/m^2$) of Pre-Flashover fires. If we find out the excellent maxing ratio through continuously study, it might be decided to be able to be utilized as fire-retardant wood.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.104.2-104.2
• /
• 2010

농산 부산물인 볏짚을 이용하여 수송연료인 휘발유를 대체할 수 있는 바이오에탄올을 생산하기 위한 전단계인 전처리와 당화에 대한 연구를 수행하였다. 볏짚은 농산 부산물 중에서 비교적 발생량이 많으며, 목질계 바이오매스에 비해 소프트하기 때문에 전처리가 용이하다는 장점이 있다. 전처리 방법으로는 여러 가지가 있으나, 본 연구에서는 증기폭쇄에 의한 전처리 방법을 채택하였다. 당화실험은 생물학적 방법인 효소당화를 하였다. 전처리 실험결과 온도가 낮고 처리 시간이 짧을수록 고형물 및 삼성분에 대한 수율이 높은 것으로 나타났다. 삼성분 중의 Glucan 수율은 $180^{\circ}C$ 실험에서 68-71%를 보였으며, $200^{\circ}C$ 실험에서는 59-64%를 보였다. Xylan은 거의 대부분이 소실되어 Xylan을 회수하는 전처리로써는 적합하지 않은 방법으로 나타났다. 반면 Lignin은 거의 제거가 되지 않았다. 당화 실험결과 $180^{\circ}C$에서 전처리한 폭쇄재는 당화 수율이 50%에도 미치지 못하였으나, $200^{\circ}C$에서 전처리한 폭쇄재는 70% 내외를 보여 주었다. 특히 분쇄 세척 멸균한 효소당화 수율은 90%가 넘는 높은 수율을 보였다. 전처리 수율과 당화수율을 종합하여 수율을 분석한 결과 $200^{\circ}C$ 전처리 실험조건에서 효소당화시 미처리 시료와 분쇄 세척 시료보다 멸균까지 실시한 조건에서 Glucan의 종합수율이 55% 내외로 월등히 높은 것으로 나타났다. 증기폭쇄에 의한 볏짚의 전처리는 Glucan의 수율이 낮아 손실이 많은 것으로 나타났으며, 이를 보완할 수 있는 전처리 조건 혹은 다른 전처리 방안이 요구된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.107-107
• /
• 2010

Hydrogen is an alternative fuel for the future energy which can reduce pollutants and greenhouse gases. Synthesis gas have played an important role of synthesizing the valuable chemical compound, for example methanol, DME and GTL chemicals. Renewable biomass feedstocks can be potentially used for fuels and chemical production. Current thermal processing techniques such as fast pyrolysis, slow pyrolysis, and gasification tend to generate products with a large slate of compounds. Lignocellulose feedstocks such as forest residues are promising for the production of bio-oil and synthesis gas. Pyrolysis and gasification was investigated using thermogravimetric analyzer (TGA) and bubbling fluidized bed gasification reactor to utilize forest woody biomass. Most of the materials decomposed between $320^{\circ}C$ and $380^{\circ}C$ at heating rates of $5{\sim}20^{\circ}C/min$ in thermogravimetric analysis. Bubbling fluidized bed reactor were use to study gasification characteristics, and the effects of reaction temperature, residence time and feedstocks on gas yields and selectivities were investigated. With increasing temperature from $750^{\circ}C$ to $850^{\circ}C$, the yield of char decreased, whereas the yield of gas increased. The gaseous products consisted of mostly CO, CO2, H2 and a small fraction of C1-C4 hydrocarbons.

• The Korean Journal of Mycology
• /
• v.41 no.4
• /
• pp.243-247
• /
• 2013

Novel Phellinus linteus HN1009K (HK1009) has been characterized on speedy mycelial growth and yearly artificial cultivation. In this study, antioxidant and anti-inflammatory activities of ethanol extract from mycelium and fruiting body of P. linteus HN1009K (HK1009) were compared to those of P. linteus (PL, Korea Sangwhang) and P. baumii (PB, Jangsu Sanghwang) as controls. HK1009 extract showed higher DPPH free radical scavenging activity in both mycelial and fruiting body samples than those of PL and PB. However, in xanthine oxidase assay, antioxidant effect was highly measured on mycelial samples of PL and HK1009. Mycelial extract of HK1009 induced high inhibitory effect on LPS-induced nitric oxide (NO) production in RAW264.7 cells comparing to PL and PB without toxicity on the cells. The results suggest that P. linteus HN1009K possesses superior antioxidant activity and anti-inflammatory effects.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.241-246
• /
• 2014

This study is to compare characteristics of saccharification reactions applying to enzymatic hydrolysis of pretreated fallen leaves for bio-ethanol production. It experimented pretreatment of acid, alkaline in the chemical. This experiment includes preteatment of acid and alkaline in chemical, soaking, shaking and autoclaving method, which were applied to biomass. In result, the glucose production from alkaline-NaOH method was 263 mg glucose/ g biomass comparing with them of acid-HCl method. Thus, alkaline-NaOH method is superior than the acid-HCl method for chemical preteatment of fallen leaves. Also, when various chemical treatments were compared, they were all. Based on the results of this study, we found that leaves, one of biomass, are possible in pretreatment and enzymatic hydrolysis process, and they are likely to affect bio-ethanol production in the future.

• Journal of Environmental Science International
• /
• v.21 no.1
• /
• pp.97-103
• /
• 2012

Suspended wood waste was being inflow into the dam and the problem of waste disposal has been occurred. In this study, ethanol production using woody floater wastes was performed to estimate value in use for raw material of renewable energy. To achieve the goal, experiments of acid hydrolysis and ethanol fermentation using dam woody floater as raw materials for bioethanol was carried out. In the results of field survey in the chungju dam, kind of woody floater was mainly Japanese larch (Larix leptolepis) and hybrid poplar (Populus tomentiglandulosa). The results of sugar extraction showed that sugar content was higher in Larix leptolepis than Populus tomentiglandulosa. Extracted sugar from wood waste was effective consumed by yeast(P. Stipitis and S cerevisiae). In the experiment consumption of sugar including glucose, galactose and xylose, the consumption rate of S. cerevisiae is faster than that of P. stipitis. and efficiency for ethanol production is higer in S. cerevisiae than P. stipitis. Also it can be confirmed that resource as ethanol production using wood waste was available.