• Journal of the Korean Wood Science and Technology
• /
• v.15 no.1
• /
• pp.12-21
• /
• 1987

본질(本質) Cement board제조(製造)를 위하여 지금까지 톱밥, 목편(木片) 및 목수(木手)(excelsior)가 사용되어 왔으나, Wafer를 사용한 제품(製品)은 아직 개발(開發)되지 않고 있는 실정이다. 따라서, 본(本) 연구(硏究)는 Cement wafer board를 압력별(壓力別), Wafer 길이별(別), Cement와 목재(木材)의 배합비별(配合比別), Wafer 배열별(排列別)로 제조(製造)하여 그 영향인자(影響因子)를 조사(調査)하고 이에 따른 제품(製品)의 물리적(物理的), 기계적(機械的) 성질(性質)을 구명(究明)하고자 실시(實施)하였으며 다음과 같은 결론(結論)을 얻었다. 1. Cement Wafer board 제품(製品)의 적정압력(壓力)은 30kg/$cm^2$이었고, 30kg/$cm^2$ 이상(以上)의 압에서는 board의 기계적 성질에 나쁜 영향을 미쳤다. 2. Cement와 목재(木材)의 배합비(配合比)가 2.1을 넘을 경우에는 board의 성질에 나쁜 영향을 끼쳤다. 3. 한쪽 방향(方向)으로 Cement-Wafer가 배열된 조건에서 제조된 CWB가 최고의 곡강도(曲强度)를 나타내었다. 4. CWB의 곡강도(曲强度)는 다른 목질(木質) Cement board보다 높은 값을 나타내었으나 박리강도(剝離强度)에 있어서는 목편 Cement board보다 약간 낮은 값을 나타내었다. 5. CWB의 난연성(難燃性) 시험(試驗)은 난연3급(難燃3級)을 만족시켰다.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.4
• /
• pp.65-72
• /
• 1992

Steam defiberated pulp and steam exploded wood(birch chip) were extracted with solvents (hot-water, 1% NaOH, MeOH, hot water, 1% NaOH). The properties of residual fiber were examined for the utilization as ruminants feed. The digestibility is 38% in steam defiberated pulp(10kg /$cm^2$-15min) and 62-77% in exploded wood(17-18kg/$cm^2$-2~10min), respectively. The more steam pressure and time increase, the more the digestibility increase. The sugars obtained from extractives is amount from 7% to 13% in asplund pulp and from 7% to 10% in exploded pulp. The sugars was mainly composed of 70-80% xylose. The digestibility of residual fiber which is extracted with solvents is low than these of original fibers. Considering the yield and digestibility as ruminant feed, exploded pulp under 17kg /$cm^2$ for 10min has the best efficiency. The exploded wood gives 75.3% on yield(O. D. chip) and 48% on the digestibility.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.1-9
• /
• 1995

This study was carried out to experiment the dimensional stabilization of woods of red pine (Pinus densiflora S. et Z.) and sugi(Cryptomeria japonica D. Don) by vacuum impregnation of polyehtylene glycols(PEG) with mo. wt. 200, 400, 600, 1000; polypropylene glycols (PPG) with mo. wt. 425,725 ; PEG-acryloylates, and PPG-acryloylates synthesized, and then by water soaking. The results obtained are as follows: 1. The density of sapwood and heartwood was different from each other in both species. 2. The PEG and PEG-macromers with lower molecular weight by impregnation has increased the density of wood specimens more higher, thereby caused their higher volume expansion, and those with higher molecular weight than 600 has tended to down their density increment. 3. Before and after water soaking, the density decrease of specimen impregnated was high in woods impregnated with simple PEG and PPG, while lower in specimens impregnated with PEG-macromers and PPG-macromers. 4. So PEG-macromer was expected to hold the original dimension of decayed wood for antiques, but it was necessary to develop another penetration method as well as aqueous solvent.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.2
• /
• pp.8-15
• /
• 2008

Wastewoods (logging residues) generated in Korea were used to make lignocellulosic fillers for papermaking. Lignocellulosic fillers could play great roles to increase retention efficiency and thus decrease turbidity of white water in papermaking process. In addition, lignocellulosic fillers could be used to improve physical properties of paper through their high affinity to cellulosic fibers, leading to the less use of chemical additives like retention aids. Wastewoods including Pinus densiflora and Quercus variabilis were chemically and mechanically treated for making fine particles passing through 100 mesh wire. The newly generated fillers showed larger particle size distribution than ground calcium carbonates but similar distribution to talc. In particular, pretreatment by hot water was more effective to generate smaller particle size than by alkali treatment. Lignocellulosic particles mixed with ground calcium carbonates under intense hybridizing condition greatly contributed to surface coverage of organic fillers in addition to filling to lumen and pits.

• Journal of Mushroom
• /
• v.4 no.2
• /
• pp.43-47
• /
• 2006

PMO-P4, being cultivated as "Sanghwang" in Korea, was proved to be P. baumii based on ITS (internal transcribed spacer) sequencing and RFLP (Restriction Fragment Length Polymorphism) patterns along with some Phellinus species including P. linteus. The similaraty of ITS sequencing between PMO-P4 and other Phellinus species was given the range of 48.6%~72.2%, showing the highest homology from P. linteus and the lowest from P. gilvus.

• Conservation Science in Museum
• /
• v.12
• /
• pp.89-92
• /
• 2011

Wooden object lacquerware and grass made object excavated were discovered in water. The object can be dry gradually for a long time when it is not kept at water evaporation. Wooden area of wet lacquerware wet organic materials mmersed kept lacquer only on the exterior after being decayed, and most of grass made object were adhered to the earth. In this study, the author preserved lacquerware and grass made equipment at Dahori Changwon that were relics in the Iron Age by using bees wax, rayon pper and layering technique. And, the author could remove ware from the earth to conserve lacquer and grass made object.

• KSBB Journal
• /
• v.24 no.5
• /
• pp.415-419
• /
• 2009

In this study, the detoxification methods were evaluated for the removal of fermentation inhibitors from synthetic solution containing the composition similar to the lignocellulosic hydrolysate. The enzyme peroxidase and laccase were used as a biological treatment method. The physico-chemical methods such as adsorption and ion exchange were applied by using activated charcoal and ion exchange resins. The enzyme peroxidase showed a excellent removal of phenolic compounds. The 5-HMF and furfural were completely removed by activated charcoal. The anion exchange resin showed a good result for detoxification of acetic acid. The activated charcoal and ion exchange resins lead to a loss of sugars more or less. The choice of detoxification method must be made after considering the composition and inhibitors in hydrolysates.

• Korean Journal of Pharmacognosy
• /
• v.31 no.3
• /
• pp.345-350
• /
• 2000

From the heartwood of Rhus verniciflua, four known flavonoids (1-4) were isolated along with an unknown one (5). Compounds 1-4 were identified to be garbanzol, sulfuretin, fisetin and fustin by NMR data. NMR data of 1-4 were fully assigned by the aids of 2D-NMR spectra. Among these compounds, only sulfuretin had significant cytotoxic and antioxidant ability at high concentrations. In addition, it seems likely that the 5-hydroxy-lacking flavonoids could not influence on the activity of laccase with cofactor of cupric cation, which catalyzes oxidative coupling reaction, in this plant.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.21-29
• /
• 2011

Recently, the use of recycled fibers was increased in order to replace the virgin pulp for low production cost and forest conservation. However, the recycled fibers decreases drainage rate, papermaking efficiency and product quality by short fibers and low wettability because of hornification. To overcome the limitation of low drainage rate, the technology of organic fillers were applied. Wooden fillers gave high bulk and stiffness of paper, but they reduced the strength of paper. In order to improve strength properties 4 types of strength additives were added and analyzed. Cationic starch, branched strength additive, linear wet strength additive, and linear dry strength additive were used. The drainage rate and paper properties such as bulk, air permeability and tensile strength were measured. As results of analysis, addition of branch type of strength agent such as C-starch was effective than linear type of strength agent in the drainage rate. Nevertheless there was no effect on the drainage rate by adding the pretreated wooden fillers. By adding the pretreated wooden fillers, bulk, air permeability and tensile strength of handsheets were improved with low dosage than non-pretreated fillers.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.1
• /
• pp.24-30
• /
• 2012

This study was carried out in order to analyze a repletion possibility about color change of base paper after elevated heat exposure when wooden fillers were added. Fillers may reduce production cost because its price is usually inexpensive than pulp with higher bulkiness. Wooden fillers have lower density than inorganic fillers, so they may increase bulk more than inorganic fillers. Never the less wooden fillers have disadvantage of yellow color by heat exposure, so the addition level should be carefully controlled. Brightness and whiteness changes after elevated heat exposure depending on coating weight were analyzed. With wooden fillers addition, breaking length and surface strength decreased but bulkiness increased. As the exposure time of elevated heat increased the coating paper with wooden fillers addition had higher brightness and whiteness values than those of inorganic fillers.