• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.494-504
• /
• 2020

Ten historic sites (denoted as A- J in this study) of a tomb were found during the construction of the east-west expressway in District 2 of Hyangnam, Hwaseong, which is implemented by the Gyeonggi-do headquarters of the Korea Land & Housing Corporation. Thetombswere first detected at siteH, and further investigations revealed various tombs from the Three Kingdoms period; artifacts such as gilt-bronze shoes and caps were excavated from wooden coffins in the tombs. The pottery examined in this study was the only pottery artifact excavated from the site. Its raw clay was soft and loose, reddish brown, and had quartz and feldspar particles of < 1 mm, which appeared to have been added as reinforcing agents. The firing temperature of the pottery was estimated to be under 800-870 ℃ as the mica remains and tridimite, which is the phase transition mineral of quartz, was not produced; a slight endothermic peak was also detected because of the hydration of sericite at 800 ℃. The condition of the artifact was severely weakened because of various factors, such as soil pressure from the stratum formed over the site and repeated freezing and thawing. The artifact could not be collected alone, and thus, surrounding soil that had attached to the artifact was also collected; the artifact was transported to the laboratory and conservation treatment was conducted in a safe and systematic manner.

• Korean Journal of Heritage: History & Science
• /
• v.37
• /
• pp.5-37
• /
• 2004

A wooden coffin has been given academic attention in Kaya(伽倻), due to the place the stage of Samhan society appropriately in the development of ancient korea history. Special attention must be paid on Dohang-Ri(道項里) woden coffin, since it is expected to explain the origin of Arakaya(阿羅伽倻) in the region of southen korea peninsula. Dohang-Ri wooden coffin is become generally knowen two types, and complete its unique feature in Chin-Han(辰韓) and Byun-Han(弁韓). Recently the fact that Dohang-Ri wooden coffin is discovered only in the king tombs of Chang Won Daho-Ri(昌原茶戶里) and it is remarkable of political connection between Kuya-Kuk (狗邪國) and Anya-Kuk(安邪國). Various ironware unearth of Dohang-Ri has seen similar to that from Daho-Ri, but it has not bronze mirror be maid Chines, symbol with dignity of social position in the ruling ciass. It seems that political unit of Daho-Ri is advanced sociaity and central force than Dohang-Ri in the Byun-Han. The later of two century, I have a think about wooden coffin changes the wooden chamble of Dohang-Ri and Daho-Ri that it go out of sight at AD.2 century. Becouse of possitive achaelogical sites has not confirm, it request radical interpretaion. I inference to accordingly to the it appearance connected of the wars between the eight country of southen regins in korea peninsula at the first half of AD.3 cencury. Exactly, the politial units of Dohang-Ri and Daho-Ri has concentration of trade in Racdong river(洛東江) and Nam river(南江) water system and that give form to coexistence system of economic and political mutuality.

• Bangmulgwan gwa yeongu (The National Museum of Korea Journal)
• /
• v.1
• /
• pp.150-173
• /
• 2024

The Gyeongsang region experienced an epoch-making social transformation approximately around the second to first century BCE, including the replacement of Bronze Age types of tombs (such as dolmens, stone cist tombs, and earthen tombs with flat capstones) with clusters of wooden coffin tombs and the emergence of wajil pottery (soft stoneware) and ironware. These shifts in the archaeological material evidence have been discussed in the context of the formation of the states that comprised the three Han confederacies and in relation to wooden coffin tombs built in later periods. This paper explicates the appearance of clustered wooden coffin tombs with accompanying ironware by categorizing them. In particular, it examines the emergence of wooden coffin tombs by creating the Wolseong-dong type, which differs from Tomb No. 5 in Joyang-dong and Tomb No. 1 in Daho-ri with their deep burial pits and large quantities of prestige goods and soft stoneware items. The Wolseong-dong type of tomb commonly features ironware, including flat-bladed iron axes, oblong cast iron axes, iron wire, iron chisels, and iron swords; a small slender, rectangular wooden coffin tomb with a shallow burial pit of less than sixty centimeters; and pottery of a type preceding soft stoneware, such as long-necked jars, triangular attached-rim pottery bowls and pots, and mounted vessels. There are also a few bronzeware items found in them, but no prestige goods. This study scrutinizes tombs in Tamni-ri in Uiseong, Hagu-ri in Gyeongju, and Hakjeongdong in Daegu by comparing them with the Wolseong-dong type, and it confirms that in Sinseodong in Daegu, Wolseong-dong type tombs and later Joyang-dong type tombs have separate spatial distributions within the site. This also indicates that the Wolseong-dong type is a valid categorization among wooden coffin tombs. Although the rise of the Wolseong-dong type tomb is associated with the migration of a group, I reserve judgement on whether its origins should be understood in the context of the iron culture in the southwestern region of South Korea that was sparked by King Jun's advance to the south or if they lie in the western region of North Korea. Either way, the Wolseong-dong type is thought to be the tombs of a group of people with lower hierarchical status than the occupants of the later Joyang-dong type.

• Conservation Science in Museum
• /
• v.3
• /
• pp.9-13
• /
• 2001

Being entrusted with the conservation of Kyongju National Museum, the conservators did a conservation treatment on the iron helmet found in the wooden coffin excavated from No. 35 Tomb in Ga-Zone, Okseong-ri, Pohang, Kyongbuk Province. They reported their work ranging from the collection of and conservation treatment on the artifacts found at the excavation site to the restoration of them to the originals.

• KOMUNHWA
• /
• no.56
• /
• pp.59-91
• /
• 2000

The iron culture have been studied mainly about the initial aspect and the growth of polity grossly on the level of the south Korea or the Yeungnam province. But the iron culture is necessary to study by diachronic and regional approach about the artifact

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.33-42
• /
• 2004

The forged iron axe found in the No. 2 wood-framed tomb (the middle 3rd century) of Hwangseongdong, Gyeongju is rectangular on the plane level. It shows an obtuse angle in the edge part, while the joint part has the both sides folded up and shows the traces of wood. Under the reflected light, the Iron axe shines in metal luster, which is bright light gray or light creamy colors. The result of x-ray diffraction analysis shows that the axe consists of magnetite and geothite, which can explain why the composition and structure of the original ore has been kept intact. The microtexture of the axe has the irregular network of ferrite and pearlite, and tile cementite of tiny amount in the ferrite background. The overall treatment of the texture seems to be thermal with a high ratio of carbon. There are fine-grained magnetite, wolframite, quartz, calcite, mica, hornblende and pyroxene inside the axe. Those must be the impurities that they failed to remove in the refining process. The normal ferrite is composed of pure iron whose $Fe_2O_3$ proportion is from 99.16 to $99.84\;wt.\%$. Other than them, the ferrite parts usually contain $Al_2O_3\;and\;SiO_2$. The irregular network of pearlite also contains Impurities including $Al_2O_3\;and\;SiO_2$ and shows highly diverse patterns of carbon content. It's because the axe was carburized after the material was made to resemble pure iron. The decarbonization work didn't go well along the process marks. It's estimated that the original ore was bloom produced in low-temperature reduction and formed around in $727^{\circ}C$, which is eutetic temperature.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.231-245
• /
• 2007

The forged iron axe of the middle 3rd Century found in the No. 2 wood-framed tomb from the Hwangseongdong site, Gyeongju is rectangular on the plane level. The iron axe shines in met-allic luster, which is light grey with pale creamy tint. The result of X-ray diffraction analysis shows that the axe consists of magnetite and geothite, which can explain why the composition and texture of the original ore has been kept intact. There are fine-grained quartz, calcite, mica, magnetite, amphibole, unknown tungsten minerals, pyroxene and olivine inside the axe. Those must be the impurities that they failed to remove in the thermal treatment process. Generally, the iron axe consists mainly of pearlite texture coexisting ferrite and cementite, and show high carbon contents with homogeneous distribution. It can be interpreted the axe was carburized after the material was made to resemble pure iron. The decarbonization work didn't go well along the process marks. Crude ores of the iron axe are possible utilized by magnetite from the Ulsan mine on the basis of the occurrences and inclusions. It's estimated that the original ore was bloom produced in low-temperature reduction and formed around in $727^{\circ}C$, which is eutetic temperature.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.178-199
• /
• 2011

The ancient tombs found in Bokcheon-dong, Busan originate from the time between the $4^{th}$ and $5^{th}$ centuries, the period of the Three Nations. They are known as the tombs where the Vertical Plate Armour was mainly buried. In 2006, two units of the Vertical Plate Armour were additionally investigated in the tombs No.164 and No.165 which had been constructed at the end of the eastern slope near the hill of the group of ancient tombs in Bokcheon-dong. Throughout this study, the contents of the two units of the Vertical Plate Armour, whose preservation process has been completed, have been arranged, while the group of constructed ancient tombs in Bokcheon-dong from the $4^{th}$ century has been observed through the consideration of the burial pattern. The units of the Vertical Plate Armour from the tombs No.164 and No.165 can be classified as the IIa-typed armor showing the Gyeongju and Ulsan patterns, according to the attribute of the manufacturing technology. Also, they can be chronologically recorded as those from the early period of Stage II among the three stages regarding the chronological recording of the Vertical Plate Armour. While more than two units of the Vertical Plate Armour were buried in the largesized tomb on the top of the hill of the group of ancient tombs, one unit of the Vertical Plate Armour was buried in the small-sized tomb. By considering such a trend, it can be said that in the stage of burying the armor showing the Gyeongju and Ulsan patterns (I-type and IIa-type), different units of the Vertical Plate Armour were buried according to the size of the tomb. However, as the armor showing the Busan pattern (IIb-type) was settled, only one unit was buried. Meanwhile, the tombs No.164 and No.165 can be included in the wooden chamber tomb showing the Gyeongju pattern, which is a slender rectangular wooden chamber tomb with the aspect ratio of more than 1:3. However, according to the trend shown by the buried earthenware, it can be said that there seem to be common types and patterns shared with the earthenware which has been found in the area of Gimhae and is called the one showing the Geumgwan Gaya pattern. In other words, there seem to be close relationships between the subject tombs and the tomb No.3 in Gujeong-dong and the tomb No.55 in Sara-ri, Gyeongju, regarding the types of armor and tombs and the arrangement of buried artifacts. However, the buried earthenware shows a relationship with the areas of Busan and Gimhae. By considering the combined trend of the Gyeongju and Gimhae elements found in one tomb, it is possible to assume that the group of constructed ancient tombs in Bokcheon-dong used to be actively related with both areas. It has been thought that the Vertical Plate Armour used to be the exclusive property of the upper hierarchy until now, since it was buried in the large-sized tomb located on the top of the hill of the group of ancient tombs in Bokcheondong. However, as shown in case of the tombs No.164 and No.165, it has been verified that the Vertical Plate Armour was also buried in the small-sized tomb in terms of such factors as locations, sizes, the amount of buried artifacts and the qualitative aspect. Therefore, it is impossible to discuss the hierarchical characteristic of the tomb just based on the buried units of the Vertical Plate Armour. Also, it is difficult to assume that armor used to symbolize the domination of the military forces. The hierarchical characteristic of the group of constructed ancient tombs in Bokcheon-dong from the $4^{th}$ century can be verified according to the location and size of each tomb. As are sult, the re seem to be some differences regarding the buried units of the vertical plate armour. However, it would be necessary to carry out amore multilateral examination in order to find out whether the burial of the vertical plate armour could be regarded as the artifact which symbolizes the status or class of the deceased.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.240-251
• /
• 2019

This study examined the manufacturing technology used for the flat iron axes excavated from Ulsan Hadae. Their microstructures were analyzed using metallurgical methods. In addition, a variety of manufacturing technologies were examined and compared using existing research materials on flat iron axes. As a result of analyzing ten flat iron axes, which were excavated in the order that they were laid out in a row in one of the wooden coffin tombs at Ulsan Hadae, Tomb No. 44, it was possible to classify the flat iron axe manufacturing technology and system into three types: 'pure iron - shape processing', 'pure iron - shape processing - carburizing', and 'pure iron - shape processing - carburizing - decarburizing.' All of the flat iron axes were produced by forging, and most of them were made by beating the pure iron into their shapes. In particular, a number of the flat iron axes were reinforced through a carburizing process after shaping the iron. This appears as steel products forming the basis of the steel industry at the time were commonly used as an intermediary material or currency. On the other hand, it was commonly found in all samples that the hardening was not performed after shaping or carburizing. Since the microstructure of the flat iron axes made of pure iron contained a large number of impure inclusions and the result of analyzing the components of the non-metal inclusions showed characteristics of slag which contains a mixture of glass phase and wustite, it is possible that low-temperature reduction was used in the refining process.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.222-251
• /
• 2017

This paper analyzes the characteristics of the ancient tombs discovered in the Gyeongju site and discusses the direction of the excavation. There are six special features of the wooden chamber tomb covered with stone in Gyeongju. First, confirmation of the above-ground type and the underground type burial mound. Second, confirmation of the construction such as the partition of mound and the pile of stone structure. Third, confirmation of the frontal part structure of the protect stone such as pebble-stone layer, boundary stone. Fourth, confirmation of the relationship before and after the mound. Fifth, the circumference and boundary of the confirmed(before 1990s) burial mounds were discovered, resolving the uncertainty. Sixth confirmation of the crowd unit tombs. By summing up these six features, it is possible to clearly divide the individual units and the crowd units of the Silla tombs. Confirmation of individual units and crowd units can clarify the size and scope of the tombs located by the concatenation and overlap. It is possible to get a glimpse of the formation process through the interrelationships between the two sides. The tombs are located in the upper-and-lower layer structure of the tombs and show selective site selection. When this formative process is rearranged, it is understood that the Gyeongju Silla Cemetery is formed through the course of four stages. It is anticipated that it will be possible to make selective projects in the excavation survey based on the confirmation of the individual unit and the crowd unit of the Silla ancient tombs and the formation process.