Journal of the Korean Crystal Growth and Crystal Technology
/
v.6
no.3
/
pp.449-462
/
1996
On the reaction crystallization of lanthanum oxalate effects of operation conditions of impeller speed, concentration and feed rate of reactant, and reaction temperature on the nucleation and growth of crystals were investigated experimentally. In general, at low supersation the analysis of crystallization processes is relatively clear. However, at high wupersaturation, which is usually applied in industrial crystallization, the processes are exhibited in much complication. In this study the lanthanum oxalate was crystallized by the reaction crystallization of high concentration of lanthanum chloride and oxalic acid in single-jet semi batch reactor. Agitation of solution and suspension in the reactor influenced to enhance the reaction process and crystal growth process which gave opposite effect on the crystallization of lanthanum oxalate. In our experiment since increase of impeller speed gave more influence on the reaction process rather than on the crystal growth process, the supersaturation concentration increased with increase of impeller speed, then resulted in decrease of mean crystal size. By the same effect of reactant concentration and feed rate, the decrease of mean crystall size of lanthanum oxalate was observed with increasing the reactant concentration and feed rate. In case of increasing reaction temperature, the mean crystal size increased. The morphology of lanthanum oxalate crystal was not changed within the variation ranges of the operation conditions which were applied in our experiment.
Journal of The Korean Association For Science Education
/
v.38
no.2
/
pp.249-257
/
2018
The purpose of this study was to analyze the knowledge and ability levels of middle school students in four areas: conceptual understanding, argument construction, justification schemes, and use of scientific knowledge in a causal explanation for a genetic phenomenon. A group of 162 middle school students who have taken a class titled Genetics and Evolution participated in the study. Each student answered-and justified the answer to-one question pertaining to genetics. Ability levels were rated from level 0 to level 4, with 4 being the top rating. Students were required to choose one of two competing arguments to explain whether green seed pimps and red seed pimps of the same size and shape were the same species or not. Analyzing conceptual understanding: 47% of the respondents provided the correct answer. Analyzing their abilities for constructing an argument: 75% of the students with the correct answer and 42% of the students with the incorrect answer were evaluated to be at ability level 3 or 4 for argument construction. Analyzing the students' justification schemes: "Scientific idea" and "Analogy" were the most frequently used schemes. Analyzing their use of scientific knowledge: of the students who selected the scientific idea justification scheme, 36% used the correct scientific knowledge, but the remainder used inaccurate or nonspecific scientific knowledge. These findings provide implication for encouraging argumentative writing explaining scientific phenomena regarding epistemic practice.
Journal of the Institute of Electronics Engineers of Korea SD
/
v.40
no.9
/
pp.631-637
/
2003
We have evaluated structural and electric, ferroelectric properties of PZT(30/70) thick film prepared by using 1,3-propanediol based sol-gel method on Pt/Ti/SiO$_2$/Si substrates. Rapid thermal annealing (RTA) is used to reduce the thermal stress and final furnace annealing is processed at $650^{\circ}C$. As the results of SEM analysis, we find that we get 350 nm in thickness for one coating and 1 $\mu$m for three times of coating. In the results of C-D analysis at 1 kHz, dielectric constant ($\varepsilon$$_{r}$) and dissipation factor were 886 and 0.03, respectively. C-V curve is shaped as a symmetrical butterfly. Leakage current density at 200 kV/cm is 1.23${\times}$10$^{-5}$ A/cm$^2$ and in the results of hysteresis loops measured at 150 kV/cm, the remnant polarization (P$_{r}$) and the coercive field (E$_{c}$) are 33.8 $\mu$C/cm$^2$ and 56.9 kV/cm, respectively. PZT(30/70) thick film exhibits relatively good ferroelectric, electric properties.s..
본 연구의 목적은 Navajo 직물의 역사적 발달을 고전시대를 중심으로 살펴보고 특히 외부영향에 따른 직물의 변화를 고찰하는데 있다. 구체적으로 1) 고전시대의 전통적인 직물은 어떻게 발달하였는가\ulcorner 2) 고전시대 직물의 전통적 요소와 외부영향요인은 어떤 점이 다른가\ulcorner 예 초점을 맞추었다. 연구방법은 아메리카 인디언의 이동,문화 Navajo 직조 및 직물에 대한 문헌을 바탕을 조사하였고 아리조나 주립박물과 아리조나 역사 박물관을 방문하였으며 박물관 안에 있는 전문가들의 조언을 듣고 연구의 자료를 보완하였다. 또 비교 미학적 차원에서 고전시대 navajo 직물의 전통적 요소와 외부영향 요인을 분석하였고 외부영향을 받은 직물의 예를 시각적자료로 제시하였다. 이연구는 인디언직물에 대한 이해, 고전시대. Navajo 직물의 문헌고찰을 통한 민족의복의 문화적측면에 기여할수 이고 현대적 감각을 지닌 Navajo 직물을 한국직물에 접목 응용하는데 도움을 줄수 있다 본 연구의 결과는 다음과 같다. 1. Navajo 직물을 고전, 전환, 양탄자 시대로 구분되었고. 이중에서 고전시대가 navajo 직물의 특성을 가장 잘 나타내었으며 발달된 직조기술을 보였다. Navajo인들의 직조기술은 1863년경 최고조에 달했다. Navajo 직물의 디자인 주제로 주로 인간을 둘러싸고 있는 환경에서 얻어졌고 이것들은 직선의 기하학적 형태로 구체화되었다. 또한 직물에 표현된 색도 자연과 밀접한 관련성을 갖는 있었다. 2. Navajo 직물의 주용한 용도는 여성용 드레스, 남성용 셔츠는 어깨에 걸치는 두르개였다. 여성용 드레스는 동일한 크기의 직물의 두장을 직조한 후에 꿰매었고 남성용 셔츠는 머리가 들어갈수 있는 구멍이 있는 장방형 판쵸 스타일이었다. 어깨에 걸치는 두르개는 여성의 경우 가운데가 검은색이고 가장자리가 푸른색인형태오 흰색과 붉은 색이 교대로 나타나는 형태의 2가지가 있었고 남성용은 고전시대의 대표라고 일컬어지는 족장 두르개였다. 3. Navajo 직물은 외부의 영향을 받아 많은 변화를 가져왔다. 즉 스페인 사람들로 인하여 면 섬유대신 양모섬유를 사용하게 되었고 전통적 모양과 다른직물이 출현하게 되었다. 또한 인디고 염류, 색소니 실, 바에타 직물의 도입으로 다양한 색상의 표현이 가능해졌고 이와 관련하여 다이아몬드 십자형 톱니형 무늬드이 나타나게 되었다. 4, 고전시대를 대표하는 직물로 족장 두르개, 쇼올, 안장덮개를 들수 있으며 이 직물들에서 뚜렷하게 외부영향 요인을볼수 있다. 즉 족장 두르개의 가장 정교한 단계에서 다이아몬드 무늬가 가장가리 가운데 모서리에 위치하여 9지점 배치를 이룬 것 쇼올의 경우 폭보다 길이가 긴 형태의 비전통적 모습을 나타낸 것 안장덮개에서 보여지는 여덟포인트 별 무늬도 외부의 영향을 받은예이다. 뛰어난 직조기술로 유명한 navajo인들은 변화에 잘 적응하는 특성을 갖고 있었다. 외부의 영향을 그들은 긍정적으로 받아들였고 자기 자신들의 필요에 맞도록 수정하여 정체감을 잃지 않으면서도 문화를 발전시켰다. 따라서 고전시대의 Navajo 직물은 고유적 요인과 외래적 요인의 조화를잘 나타내고 있으며 디자인의 탁월함이 세련됨 천연염료와 인조염료의 배\ulcorner에 의한 색상의 우월성 등으로 오늘까지 높이 평가되고있다.
The purpose of this review is to discuss the debate concerning the interpretation of epidemiologic studies on particles and health effects. Study of the 1952 air pollution disaster in London established that very high levels of particulate-based smog can cause dramatic increases in daily mortality. However, recent epidemiologic studies have reported statistically significant health effects and mortality due to low levels of air pollution. The statistical significance does not prove causation in observational studies; therefore it is necessary to evaluate these associations. There are arguments for and against each of the numerous studies using Hill's criteria, however the body of accepted evidence supports the causal association. In particular, a high level of consistency in the estimated effect of PM10 has been observed across studies worldwide. The mechanism of the relationship between air pollution and health effects is not obvious. The mechanism of particle-induced injury may involve the production of an inflammatory response by the particulate. The harvesting and the threshold effect are also major concerns regarding the health effects of air pollution. However, current epidemiologic findings indicate that linear models lacking a threshold are appropriate for assessing the effect of particulate air pollution on daily mortality even at current levels.
Woo, Koan Sik;Song, Seok Bo;Ko, Jee Yeon;Kim, Young Bok;Kim, Wook Han;Jeong, Heon Sang
The Korean Journal of Food And Nutrition
/
v.29
no.1
/
pp.134-143
/
2016
We evaluated the antioxidant properties of adzuki beans and the quality characteristics of sediment using various cultivation methods. There were significant differences in total polyphenol and flavonoid contents in beans grown using different methods of cultivation (p<0.05). Also, DPPH and ABTS radical-scavenging activities were significantly different depending on cultivation method (p<0.05). The sediment yield before drying of Chungju-pat, Hongeon, and Arari was 296.64~339.01, 271.36~282.24, and 268.21~292.32%, respectively, and the sediment yield after drying was 71.68~85.41, 77.90~85.19, and 74.15~78.65%, respectively. The L-value of Chungju-pat and Arari sediments revealed a significant difference given different cultivation methods (p<0.05), but Hongeon sediment did not show a significant difference. There was a significant difference in the a- and b-value of adzuki bean sediments cultivated using different methods (p<0.05). The particle size of Chungju-pat, Hongeon, and Arari sediments was 66.21~98.80, 61.62~97.07, and $82.96{\sim}106.71{\mu}m$, respectively, and all were significantly different depending on cultivation method (p<0.05). There were also significant differences in the water absorption index, water solubility index, and swelling power when different cultivation methods were used (p<0.05).
Gobiid fish were collected monthly in Cheonsu Bay by a beach seine from the shallow water and by an otter trawl from the deep water from September, 1984 to August, 1986. Seasonal variation in species composition and biology of the major species were examined with the data of length and age composition. Fourteen speices of gobies were identified. Gobiid fish were more abundant in the shallow water than in the deep water. In the shallow water, they constituted 66% and 39% of the fish collected in the mud flat and the sand beach, respectively. The suction discs of the gobies explains that they inhabit successfully in the surf zone where the wave action is strong. Of the major species, Chaenogobius mororanus predominated in the shallow mud flat. A large number of adults of this species were obtained in Spring and their juveniles were collected from Summer through Autumn. Favonigobius gymnauchen was abundant in the shallow water, especially in the sand beach. This fish seemed to spawn from May through June, about two months later than Chaenogobius mororanus. Acanthogobius hasta juveniles lived in the shallow water and moved into the deep water as the fish grew. Chaturichthys stigmatias was collected mainly in the deep zone.
Journal of the Computational Structural Engineering Institute of Korea
/
v.17
no.3
/
pp.319-332
/
2004
Due to their high strength to weight ratios and excellent durability, fiber reinforced polymer(FRP) is widely used in construction industries. In this paper, a shape optimum design of FRP bridge decks haying pultruded cellular cross-section is presented. In the problem formulation, an objective function is selected to minimize the volumes. The cross-sectional dimensions and material properties of the deck of FRP bridges are used as the design variables. On the other hand, deflection limits in the design code, material failure criteria, buckling load, minimum height, and stress are selected as the design constraints to enhance the structural performance of FRP decks. In order to efficiently treat the optimization process, the cross-sectional shape of bridge decks is assumed to be a tube shape. The optimization process utilizes an improved Genetic Algorithms incorporating indexing technique. For the structural analysis using a three-dimensional finite element, a commercial package(ABAQUS) is used. Using a computer program coded for this study, an example problem is solved and the results are presented with sensitivity analysis. The bridge consists of a deck width of 12.14m and is supported by five 40m long steel girders spaced at 2.5m. The bridge is designed to carry a standard DB-24 truck loading according to the Standard Specifications for Highway Bridges in Korea. Based on the optimum design, viable cross-sectional dimensions for FRP decks, suitable for pultrusion process are proposed.
Slot coating has been widely spread in photo resist coating on glass for flat display monitor. High quality of coating is required as high quality of image in display is needed. Coating quality in the slot coating is divided into nozzle direction quality and machine direction quality. Nozzle direction quality is related to flow uniformity inside the die whereas machine direction quality is related to die lip design and operational conditions. In this study coating uniformity in the machine direction of slot coating has been investigated through computer simulation. Die lip angle and die lip length were considered as outside die geometry and coating speed was considered as operational condition. Coating behavior has been analyzed and coating quality has been evaluated through computer simulation. Coating thickness decreased and coating uniformity increased as coating speed increased. However, the stability of meniscus formation was reduced and subsequently coating stability was reduced as coating speed increased. Coating thickness deviation decreased as die lip angle increased in down stream die. Coating thickness decreased and time to reaching steady state increased as increased die lip length in down stream die.
Journal of the Society of Cosmetic Scientists of Korea
/
v.44
no.3
/
pp.343-347
/
2018
We synthesized 1, 2-hexanediol galactoside (HD-Gal) from HD using Escherichia coli (E. coli) ${\beta}-galactosidase$ (${\beta}-gal$), in which the reaction is generally called as transgalactosylation (reverse hydrolysis). In this study, we investigated how much HD-Gal and HD had a cytotoxic effect on HaCaT cell, in order to compare HD-Gal with HD in terms of the cytotoxicity of human skin cell. Cell proliferation assay and phase-contrast microscope observation were used for investigating the cytotoxicity. As a result, HD-Gal had not cytotoxic effect on HaCaT cell in the concentration range from 42.2 to 211 mM. In addition, when we observed the cells using microscopy, there was no change in the cell morphology. Meanwhile, when 42.2 mM and 84.4 mM HD were treated on HaCaT cell, we did not observe the cytotoxicity; however, when 168.8 mM and 211 mM HD were on HaCaT cell, HD had a higher cytotoxic effect on HaCaT cell. In addition, when HD was treated on the cells regardless of the concentration of HD, there were obvious changes in cell morphology and cell number. It was expected hopefully that HD-Gal would be applicable as a substitute for HD as a less toxic preservative in views of safety, health, and well-being.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.