• Korean Journal of Optics and Photonics
• /
• v.20 no.1
• /
• pp.41-47
• /
• 2009

We report the spectral characteristics of Multimode Interferometer (MMI)-coupled semicondoctor square ring resonators. The epitaxial layers of the proposed semiconductor ring resonator consists of $1.55{\mu}m$ GaInAsP-InP multiple quantum wells. The lasing characteristics were observed by varying the structure parameters of the MMI-coupled square ring resonators. It is concluded that the MMI-coupled scheme selects a single spectral lasing mode in the double square ring cavities.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.1
• /
• pp.16-23
• /
• 1997

As analysis of the forced dynamic response and vibrational mode for the cantilevered beam is described. Experimental results are compared with the natural frequencies and vibrational modes for the cantilevered beam using the theory of Bernoulli-Euler and finite element method. We have found 1st and 2nd resonance frequency of the cantilevered beam by means of the various external frequencies, $1{\sim}70Hz$, using magnetic transducer. And we have studied the vibrational displacement at obtained resonance frequency of the cantilevered beam. The experimental results for the nodes of cantilevered beam were 0 in 1st mode and 0,0.786 in 2nd mode. close agreement between the theoretically predicted results and experimental result was obtained for the vibrational mode.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.277-278
• /
• 2013

본 논문은 인터리브드 기법을 적용한 양방향 DC-DC 컨버터의 구현 및 실험에 대해 서술하였으며 구현한 컨버터의 특성을 분석하였다. 구현한 컨버터는 변압기를 사용하여 절연효과를 가지고 있으며 벅/부스트 구조가 적용되어 비교적 낮은 권선비로도 높은 승압과 강압이 가능하다. 또한 인터리브드 기법을 적용하여 리플전류의 감소효과를 가지고 있다. 각 모드별로 컨버터의 특성을 분석하였으며 벅모드와 부스트모드에 대한 동작은 실험을 통하여 확인하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.217-220
• /
• 1995

본 논문에서는 최적화기법을 이용하여 모드매개변수를 추정하는 방법을 개발하였다. 최적화기법중 steepest descent method와 Fletcher-Powell method를 1자유도계의 시뮬레이션 데이터에 사용하여 Fletcher-Powell method가 초기값이나 계의 감쇠비에 관계없이 항상 정확한 모드매개변수를 추정함을 밝혀 내었다. 2자유도계의 시뮬레이션 데이터에 적용하였을 때도 본 방법은 정확한 모드매개변수를 추정하였다. 본 방법은 기존의 모드해석방법처럼 실제모드수보다 많은 모드수를 가정할 필요가 없고, 밀집한 모드를 분리하는 능력도 우수하였다. 본 방법을 실험 데이터에 적용하였을 때에도 만족할만한 결과를 나타내었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.513-516
• /
• 2011

The dynamic behavior of a small wind-turbine blade was analyzed experimentally. Arrays of fiber Bragg-Grating (FBG) sensors attached along the blade were used to measure the strains of the blade surface. An impact test was performed to estimate the resonance frequencies of the fundamental and higher modes of the cantilever blade system developed for this study. The results were similar to the results for conventional strain gages. However, FBG sensors could sense modes that strain gauges could not sense. The strains obtained from the FBG sensor array were used to estimate displacement-mode shapes of the blade.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.3
• /
• pp.197-207
• /
• 2005

Design analysis for underground spaces requires evaluating stability related to heading collapses. A failure mode is one of the critical factors in the conventional methods of stability evaluation. Identification of failure modes is, therefore, essential in securing safe construction. In this study failure modes at the tunnel heading in cohesionless soils are investigated using physical model tests for various tunnel depths and ground surface inclinations. Test results showed that the effect of depth and the inclination of ground surface on a failure mode are of significance. It is identified that, with an increase in depth, failure modes become localized in a region close to tunnel face. It is also known that an increase in the inclination of ground surface results in inclined an d wide failure modes. Numerical simulation of laboratory tests was performed, and shown that the numerical analysis is useful in identifying the heading failure modes, particularly for large underground spaces.

• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.281-288
• /
• 2002

It might be true that both experimental and analytic techniques have been developed in the vibration analysis end engineering. It could not be said, however, that the experimental method has been also developed as much as analytic method, such as Finite Element Method One of the reason is that computation time becomes longer and that the solution often diverges depending on the choice of initial value in solving nonlinear equation. The equation in experimental modal analysis is usually composed of the nonlinear term of natural frequency and modal damping ratio, and the linear one of equivalent stiffness. In this study, the nonlinear terms were solved first, and then the linear term was obtained. The experimental modal parameters were estimated, applying the developed experimental modal analysis curve-fitting method to the super-structure model. In addition, the number of modes and modal damping ratio could be easily determined by the developed program with the application of graphical techniques and with easy handling button.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.2
• /
• pp.75-84
• /
• 2010

An in-cabinet response spectrum should be generated to perform the seismic qualification of devices and instruments mounted inside safety-related electrical equipment installed in nuclear power plants. The response spectrum is available by obtaining accurate seismic responses at the device mounting location of the cabinet. The dynamic behavior of most of electrical equipment may not be easily analyzed due to their complex mass and stiffness distributions. Considering these facts, this study proposes a procedure to estimate the seismic responses of a structure by a combination of a test and subsequent analysis. This technique firstly constructs the modal equations of the structure by using the experiment modal parameters obtained from the impact test. Then the seismic responses of the structure may be calculated by a mode superposition method. A simple steel frame structure was fabricated as a specimen for the validation of the proposed method. The seismic responses of the specimen were estimated by using the proposed technique and compared with the measurements obtained from the shaking table tests. The study results show that it is possible to accurately estimate the seismic response of the structure by using the experimental modal parameters obtained from the impact test.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.3
• /
• pp.37-46
• /
• 1998

본 연구에서는 압전 세라믹인 PZT를 이용하여 두께 진동모드의 다중모드 필터를 설계, 제작하였다. 다중모드 세라믹필터의 등가회로를 설계하였고, 이를 이용하여 설계변수 인 물성변수와 형상변수에 따른 필터전달특성의 경향을 분석하였다. 이를 바탕으로 10.7MHz의 중심주파수를 가지는 세라믹필터를 제작하였고, 설계변수 중에서 압전세라믹 기 판과 전극형상의 변화에 따른 필터의 전달특성의 변화를 실험적으로 검증하였다. 본 연구를 통한 경향분석결과는 다양한 진동모드와 다양한 주파수대를 가지는 다중모드 필터를 설계하 는데 있어서 유용한 도구로 사용될 수 있을 것이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.103-103
• /
• 2004

실제 작용하는 하중상태는 요소의 형상과 작용하중의 복잡성 때문에 혼합모드 하중상태를 나타낸다. 또한 혼합모드 피로균열은 전파과정 동안 부재의 구속형상이나 외부 작용하중의 급격한 변화에 의해서도 영향 받게 된다. 이로 인하여 피로균열은 균열선단에서 지속적이면서 급격한 응력 재분배의 상태를 경험한다. 그러므로 다양한 응력 재분배 상태에서의 혼합모드 피로균열에 대한 고찰이 필요하다. 본 연구에서는 응력 재분배상태 하에서 나타나는 혼합모드 피로균열의 전파거동에 대한 특징이 실험적으로 고찰되었다.(중략)