• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.1
• /
• pp.45-51
• /
• 2001

본 논문은 이산 시간 Takagi-Sugeno (TS) 퍼지 시스템에 대한 출력 추종 제어기 설계에 관하여 연구한다. 출력 추종 제어기의 설계를 위하여 이산 시간 TS 퍼지 시스템을 불확실성을 포함한 선형 시스템의 집합으로서 표현하는 기법을 제시한다. 시스템의 상태에 대하여 어파인 변환을 하여 출력 추종 제어문제를 안정화 문제로 변환한다. 점근적 추종성능을 보장하는 제어기 설계를 위한 충분조건은 선형 행렬 부등식의 형태로 표현되면 주어진 제어기 설계의 해는 여러 가지 수치적 기법을 이용하여 효율적으로 구해질 수 있다. 트레일러 트럭의 임의의 위치에 후진 주차시키기 위한 제어기 설계의 예를 통하여 본 논문에서 제안한 추종 제어 기법의 효용성을 검증한다.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.17-27
• /
• 2006

Car following model is a theory that examines changes of condition and interrelationship of acceleration deceleration. headway, velocity and so on closely based on the hypothesis that the Posterior vehicle always follows the preceding vehicle. Car following mode) which is one of the research fields of microscopic traffic flow was first introduced in 1950s and was in active progress in 1960s. However, due to the limitation of data gathering the research depression was prominent for quite a while and then soon was able to tune back on track with development in global positioning system using satellite and generalization of computer use. Recently, there has been many research studies using reception materials of global Positioning system(GPS). Introducing GPS technology to traffic has made real time tracking of a vehicle position possible. Position information is sequential in terms of time and simultaneous measurement of several vehicles in continuous driving is also practicable. Above research was focused on judging whether it is feasible to overcome the following model research by adopting the GPS reception device that was restrictively proceeded due to the limitation of data gathering. For practical judgment, we measured the accuracy and confidence level of the GPS reception devices material by carrying out a practical experiment. Car following model is also being applied in simulations of traffic flow analysis, but due to the difficulty of estimating parameters the basis of the above result. it is our goal to produce an accurate calibration of car following model's parameters that is suitable in this domestic actuality.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.847-849
• /
• 1999

본 논문에서는 도립 진자 시스템에 대하여 모델의 불확실성에도 불구하고 수레의 위치가 기준 입력을 추종하는 강건한 2-자유도(two degree of freedom) 제어기를 설계한다. 도립 진자 시스템의 모델 불확실성은 기약 분해 불확실성으로 고려하고, 기준 입력 추종 성능은 도립 진자 시스템의 수레 위치가 원하는 기준 위치로 추종하는 문제를 고려한다. 이러한 강건 안정화와 기준입력 추종사이의 절충 문제를 해결하기 위해서 2-자유도 제어기를 설계한다. 2-자유도 제어기는 프리필터와 피드백 제어기로 구성된다. 설계 절차에 따라 얻어진 제어기는 모의 실험을 통해 그 성능을 확인한다.

• Proceedings of the KIEE Conference
• /
• 1986.07a
• /
• pp.145-148
• /
• 1986

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.6
• /
• pp.158-167
• /
• 1994

The design concept of varaiable structure control is useful not only to stochasic systems but also to adaptive control systems. The Dynamic equation of vertical three linkage robot was derived. And it was simplyfied according to the scheme of control strategy. And we specify the form of model. Thereafter the error dynamic equation was derived between the real state of the plant and state of the model. Some simulations were performed to control robot manipulator applying the methodology of the variable structure model following adaptive control.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.103-109
• /
• 2012

Samsung Thales has developed a small-sized autonomous underwater vehicle "BOTO" verified by a mathematical model simulation. The hydrodynamic coefficients and drag force were experimented at circulating water channel for validating cruising performance of the AUV. Based on the mathematical model, we simulated turning radius and way-point tracking on horizontal plane using way-point tracking algorithm. In this paper we introduce the vehicle system and the sea trial test results will be shown.

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.557-565
• /
• 2015

In this paper, a method for estimating the location of a quadcopter is proposed by applying an EKF-SLAM algorithm to its flight control, to autonomously control the flight of an unmanned quadcopter. The usefulness of this method is validated through simulations. For autonomously flying the unmanned quadcopter, an algorithm is required to estimate its accurate location, and various approaches exist for this. Among them, SLAM, which has seldom been applied to the quadcopter flight control, was applied in this study to simulate a system that estimates flight trajectories of the quadcopter.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.1
• /
• pp.42-54
• /
• 2009

Contrast to the 6-DOF nonlinear dynamic modeling of nonlinear tracking problem, 3-DOF point-mass modeling of flight mechanics is efficient and adequate for applying the trajectory optimization problem. There exist limitations to apply an optimal trajectory from point-mass modeling as a reference trajectory directly to conduct the nonlinear tracking control, In this paper, new matching trajectory optimization scheme is proposed to compensate those differences of mismatching. To verify performance of proposed method, full ascent three-dimensional flight trajectories are obtained by reflecting the real constraints of flight conditions and airship performance with and without jet stream condition. Then, they are compared with the optimal trajectories obtained from conventional method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.347-348
• /
• 2022

자율운항선박 도입에 관한 논의가 국제해사기구에서 본격적으로 시작됨에 따라 자율운항선박 관련 기술개발이 세계적으로 활발하게 진행되고 있다. 그러나, 통신, 보안, 고장진단, 유지보수 등의 기술개발이 아직 미흡하여, 자율운항선박의 상용화까지는 많은 시간이 소요될 것으로 예상된다. 이러한 기술들은 문제가 발생할 경우 선박에 막대한 피해를 발생시킬 수 있으며, 특히, 연안을 항해하는 선박보다는 대양을 항해하는 선박에 더 치명적이기 때문이다. 본 연구에서는 대양항해 시 자율운항선박에 발생할 수 있는 문제들을 극복하기 위한 방안으로 여러 척의 선박을 하나의 그룹으로 묶어 항해하는 그룹항법시스템을 제안한다. 하나의 그룹은 한 척의 유인선박인 리더선박과 여러 척의 무인선박인 추종선박으로 구성되어 있으며, 항해하는 동안 일직선 형태를 유지한다. 리더선박은 출발지에서 목적지까지 미리 설정된 변침점을 따라 항해하며, 추종선박은 리더선박의 경로를 추종하여 항해한다. 선박의 침로를 제어하기 위한 타각 제어기는 선박에서 주로 사용되는 PD 제어기를 구현하여 사용하였다. 그룹항법시스템을 검증하기 위해 선박해양플랜트연구소에서 공개한 KVLCC2의 축소 모형인 L-7 모델을 사용하여 시뮬레이션을 진행하였다.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.1
• /
• pp.82-89
• /
• 1998

PI controller has been used in the servo system. However the time response of the system designed using the PI control scheme does not provide with desirable time response in case of variation in system parameters or perturbation like a torque disturbance. LMFC(Linear model following controller) is being used to make the response of the system follow that of the model even though the parameter variation or the perturbation occurs. In this paper, a design method, RMFC(Robust Model Following Controller) is proposed, which use an auxiliary model in addition to the LMFC, which affords robustness against the low frequency load torque disturbance. The proposed method is more useful to rejecting the low frequency torque disturbance than LMFC. Proposed method is verified by simulation and experiment.