• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.34-43
• /
• 1990

An improved parameter adaptation and control law for robot manipulator are proposed based on a linearized parametric system equation and augmented error vectors. In view of the modeling error and parasitics with small time constants which inevitably introduced during modelling process, their effects on the robustness of the system performance are reviewed and as an conutermearsure, adaptation mechanism with low pass filter is proposed. Proposed parameter adaptation and control low assure the stability of the robot manipulator in the large without further assumption. Computer simulation shows its effectiveness of the proposed adaptation mechanism to improve the robustness of the system in presence of the parasitics in the system and superior performance for high speed operations make it an attractive option in application of the adaptive control field for robot manipulator.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.395-396
• /
• 2017

차세대 고속 이동수단에 필요한 고전력 전동기에 대한 관심이 꾸준히 증가하는 추세이다. 본 논문에서는 고전력 동기전동기(PMSM) 구동에 필요한 전력 인버터의 제어 및 센서리스 제어기법을 적용한 자속 기준 제어(Field-oriented control)를 시뮬레이션을 통해 입증하였다. 고전력에서 인버터 스위치의 전력부담을 줄이기 위해 3-레벨 인버터를 설계하고, 벡터 제어 SVPWM 방식을 적용하였으며 고전력 및 고속 PMSM의 파라미터에 맞추어 센서리스(sensorless) 제어기를 설계하였다. 센서리스 제어에는 모델 기준 적응 시스템(MRAS)을 통해 속도 및 위치를 예측하여 모터를 제어하는 방식을 적용하였다. 가속시 5초간 가가속도 값을 적용하여 필요 토크 및 속도제어를 Matlab/Simulink에서 설계 및 구현하고, 예측속도와 실제 모터속도는 최대 0.01 rad의 오차를 나타났고, 67초 동안 목표 속도 500 rad/s까지 가속함을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.8
• /
• pp.708-714
• /
• 1990

This paper has proposed a self-tuning controller for tracking reference trajectory by measuring End-point of arm on robot manipulator whose link is light and flexibls, and proved the perforformance of the algorithm proposed through the computer simulation. As an object of control, a flexible robot manipulator with two-links was selected. As for structure of model, it utilized an assume mode shape method with include travity force and derived a dynaics equation by adapting two kinds of vibration mode of each.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.4
• /
• pp.597-602
• /
• 1987

In this paper, an adaptive observe based upon the exponentially weighted least-squares method is implemented in the design of a model reference adaptive controller for an unknown time-invariant discrete single-input single-output linear plant. A method of selecting the state variable filter is proposed. In this scheme, all the past data are weithted exponentially with the weighting coefficient.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.10
• /
• pp.733-739
• /
• 1988

Adaptive controllers for linear system whose nominal values of coefficients only are known, that is corrupted by disturbance, are designed by signal synthesis model reference adaptive control (MRAC). This design is stemmed from the Lyapunov direct method. To reduce the model following error and to improve the conrergence rate of the design, an indirect suboptimal control law is de rived using the Hamilton Jacobi Beellman equation. Proper compensaton for the effects of time varying coefficients and plant disturbance are suggested. In the design procedure no complete identification of unknown coefficients are required.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1476-1479
• /
• 1996

The ring rolling process is one of the best known ring production method. The present model based control system was designed for rings with rectangle cross-section yet. An Adaptive Fuzzy Control for Closed-Die Ring-Rolling was developed in order to enhance the flexibility of the radial-axial ring rolling machine and to produce the rings with highly complex cross-section profile, roller bearing rings. A fuzzy method was implemented because of its simple application and to utilize the known process knowledge. The quality of the control system was estimated by die filling grad, which is strong dependent on the rising time of the controller. The rolling process parameters were also varied to determine their influence on filling of the ring profile. Die filling met the requirement of the industry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.4
• /
• pp.309-318
• /
• 1991

In this paper, the integrator used to reduce the error between the reference signal and response, and DC motor are constructed by bond graph. Then the model following servo controller which have the high adaptation with respect to inertia, disturbance and/or load variation in the speed control system of DC motor is designed by the bond graph, and then the usefullness of this modeling method is confirmed in operating analysis and design on controller.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.3
• /
• pp.171-179
• /
• 1988

This paper deals with the controller design of the flight control system using the model reference adaptive control approach. The structure of the adaptive control system is based on the structure suggested by NARENDRA and VALAVANI. In particular, the problem is considered in case of the relative degree n=2 of plant. The flight control system is single-input single-output system, and the control input is given from the input-output data of the referencemodel and plant. For the analysis of the designed control system, thesimulation is perfarmed in cases of analog plant and analog plant with flight motion table, and reviewed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.2
• /
• pp.155-161
• /
• 2005

This paper presents time a constant estimation of induction motor using MRAS(model reference adaptive system) fuzzy control. The rotor time constant is enabled from the estimation of rotor flux, which has two methods. One is to estimate it based on the stator current and the other is to integrate motor terminal voltage. If the parameters are correct, these two methods must yield the same results. But, for the case where the rotor time constant is over or under estimated, the two rotor nut estimation have different angles. Furthermore their angular positions are related to the polarity of rotor time constant estimation error. Based on these observation, this paper develops a rotor time constant update algorithm using fuzzy control. This paper shows the theoretical analysis as well as the simulation results to verify the effectiveness of the new method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.2
• /
• pp.31-35
• /
• 1985

This paper presents novel designs of a digital minimum-time controller and a digital adaptive controller using reference no del for single input-single out put linear time-invariant plants with known parameters. The proposed digital minimum-time controller which has a deadbeat response is designed to make the transfer function of this controller equal to that of reference model, and the proposed digital adaptive controller is designed by applying the adaptation method to the proposed digital minimum-time controller. The designs of these two controllers are very simple and easy, and all types of input signal with any reference models are controllable. These dffectivenesses have been demon-strated by computer simulations carried out for a third-order plant.