• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.42-51
• /
• 2017

Measuring and evaluating project progress and performance are the key element of the construction project success. Construction progress is typically measured quantitatively by evaluating cost and time allocated to the project deliverable, and thus properly integrating cost and time is essential to the project management. This research was performed to propose an alternative methodology to integrate the cost and time and provide a framework for the progress measurement. The researchers developed a typical work process for the cost and schedule planning and also developed an alternative cost-schedule integration method by using progress integration units (PIU). A discipline of a construction phase served as a common level for WBS and CBS integration, so the PIUs'were defined under discipline. A case study project was selected to validate the developed methodology. The result showed the proposed method improved efficiency of cost and time integration. The result also showed the excluding material for the progress measurement purpose significantly reduced the bias of progress measurement.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.4
• /
• pp.367-378
• /
• 2007

We present a software which we developed for the multi-purpose CCD camera. This software can be used on the all 3 types of CCD - KAF-0401E ($768{\times}512$), KAF-1602E ($1536{\times}1024$), KAF-3200E ($2184{\times}1472$) made in KODAK Co.. For the efficient CCD camera control, the software is operated with two independent processes of the CCD control program and the temperature/shutter operation program. This software is designed to fully automatic operation as well as manually operation under LINUX system, and is controled by LINUX user signal procedure. We plan to use this software for all sky survey system and also night sky monitoring and sky observation. As our results, the read-out time of each CCD are about 15sec, 64sec, 134sec for KAF-0401E, KAF-1602E, KAF-3200E., because these time are limited by the data transmission speed of parallel port. For larger format CCD, the data transmission is required more high speed. we are considering this control software to one using USB port for high speed data transmission.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.287-297
• /
• 2012

In order to prepare for the introduction of the E-Discovery system from the United States and to cope with some causable changes of legal systems, we propose a general E-Discovery process and essential tasks of the each phase. The proposed process model is designed by the analysis of well-known projects such as EDRM, The Sedona Conference, which are advanced research for the standardization of E-Discovery task procedures and for the supply of guidelines to hands-on workers. In addition, Machine Learning Algorithms, Open-source libraries for the Information Retrieval and Distributed Processing technologies based on the Hadoop for big data are introduced and its application methods on the E-Discovery work scenario are proposed. All this information will be useful to vendors or people willing to develop the E-Discovery service solution. Also, it is very helpful to company owners willing to rebuild their business process and it enables people who are about to face a major lawsuit to handle a situation effectively.

• Journal of Korean Library and Information Science Society
• /
• v.48 no.4
• /
• pp.351-374
• /
• 2017

In this study, we propose a model for constructing a producer-centered self-publishing repository for the personal digital records and three operational process for practical application of the operational model. 1) As essential requirements for constructing a DSpace-based self-publishing repository, we propose producer-centered service provision, management subject, operation and management plan, how to activate the repository of digital personal records producers, copyright issues, development and dissemination process. 2) The repository model constructs a producer-centered circular structure considering these requirements. 3) Through a repository model with multiple agencies, it provides various services such as content distribution, keyword search, usage statistics, recommendation system, and open access to portal users and electronic publishers as well as individual users.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.3
• /
• pp.275-283
• /
• 2005

Ontologies are the core components of the Semantic Web and knowledge-based systems. But it is difficult to find useful ontologies in actual domains. In order to build useful domain ontology, the conceptualization of the domain knowledge by knowledge experts of the specific domain and the specification of conceptualized knowledge with formal languages by ontology designers are required. In addition, structured and detailed guidelines and methods should be provided to be shared by the development team members. However, existing ontology building methodologies define and describe the skeletal structure of the whole building process at the top-layer. We build a useful academic ontology that is based on the conceptual knowledge structure in the domain of philosophy, and propose a detailed methodology to build a text ontology based on Topic Maps. Our methodology consists of two phases, ontology modelling and ontology implementation. We implement a philosophy knowledge portal to support retrieving and navigating of the philosophy knowledge.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.spc4_2
• /
• pp.401-412
• /
• 2014

This study is purposed on showing an effective process for coordinate transformation of cadastral maps, based on the local datum, in the World Geodetic System (WGS) for Cadastral Reform Project (CRP). The process follows three steps: coordinate adjustment, datum transformation and distortion modeling. The first procedure is that point coordinates on local datum has to be adjusted by those GPS observed point-to-point distances, using trilateration. Secondly, the adjusted coordinates need to be transformed to WGS by applying the Affine model, while the verification of the methodology is implemented under numerical experiments. To conduct this procedure, 195 points in the same coordinate origins in Seoul and 61 points in several different origins in Incheon are used in the estimation. As a result, there are less than 2cm coordinate differences between transformed coordinates and measured ones at everywhere. Also, it is remarkable that the transformation does not depend on either of the particular common points or the sizes of computed region. Therefore, this suggested methodology is expected to easily provide identifications and corrections for points-deviations for improved quality of the cadastral map by distortion modeling through CRP.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.1
• /
• pp.1-14
• /
• 2005

It is difficult to identify reusable and independent components in component-based development(CBD) process. Therefore existing methodologies have dealt the problem of component identification based on only developer's intuition and heuristics. As a result, it is difficult to identify the business components by common developers. Therefore, in this paper, we propose a new baseline and technique to identify the business components based on domain model such as use case diagrams, class diagrams, and sequence diagrams. proposed method identifies components through two phases; system component identification and business component identification. Especially, we consider structural characteristics as well as dependency characteristics according to methods call types and directions in identifying components. We also present a case study and comparative analysis and assessment to prove the practical use of our technique.

• Information Systems Review
• /
• v.4 no.2
• /
• pp.1-17
• /
• 2002

Proliferation of IT applications and developments lead to many useful yet diverse information systems being used in an organization. Users of information system have been satisfied with useful functions and prompt outputs, however they have become realized the problem of incompatibility of diverse systems and asked for more compatible systems in which more data and software can be shared among users. Information technology architecture (ITA) is suggested as one way of avoiding such problem by many researchers. This paper ananlyzes and introduces the ITA approach used primarily in US governments and in many other organizations. In Korea, many researchers view ITA as a technical concept that deal with interperability and standards. However, ITA is more managerial oriented concept than technical, because it allows us to achieve managerial objective, for example alignment of IT to strategic objectives, with ease and more confidence. This paper proposes the necessity of ITA in IT management and clarifies the relationships of managerial focus with technical focus of ITA.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.2
• /
• pp.219-228
• /
• 2022

In this study, to improve educational motivation and learning outcomes, a mobile app using game elements was developed, and the effect of its application in rebar work education was analyzed. Using the 4F(Figure out-Focus-Fun design-Finalize) process, which is a game development model, a mobile learning app for rebar work was developed that considers the characteristics of college students familiar with smartphone use, and the app was developed in a manner that utilizes game mechanics such as learning missions and points to stimulate a learner's interest and improve educational motivation. The results show that the proposed app for rebar work is positively evaluated in terms of interface style, perceived usefulness, perceived ease of use, perceived enjoyment, attitude toward using, and intention to use. Therefore, it can be concluded that using the learning game app for rebar work in classes can contribute to improving a learner's performance in various aspects.

• The Journal of Society for e-Business Studies
• /
• v.9 no.1
• /
• pp.285-301
• /
• 2004

Public service provision through internet is one of major parts for e-government implementation. It is essential to link the internal administrative network with internet to provide the services through internet and to support kiosks through internet, which should result in critical issues for security. A relay server, as a front server for the public service processing system and a web server, a control server for kiosks, are placed between the public service processing system and kiosks to solve those security issues. It is the way to solve security issues through protecting direct communication between the public service processing system and a web server and authenticating a relay server and a web server through authentication process. In the implementation of the system this paper provide a design for an architecture model of the public service processing system through internet, which are aiming to develop high level of the quality system effectively, to reduce the risk of initial stage of development, and to reduce the incurring cost due to reworks.