• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.30-33
• /
• 2015

In this paper, we proceeded a study on the Hybrid RF based development of the smart phone Application skin disease monitoring using CMOS camera. we proposed an image transfer technology which can use the CMOS camera and we developed the smart phone application which can be possible to use a remote monitoring for skin disease. Image transfer technology using Hybrid RF communication applied for WiFi using CMOS camera. We implemented the function which can use a remote monitoring using Wi-Fi. These suggestion can be a good example for endoscopic applications using hybrid RF based smart phone application of skin disease monitoring using CMOS camera.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10c
• /
• pp.466-468
• /
• 1999

현재 인터넷 프로토콜인 IPv4의 주소 부족 등의 문제를 해결하기 위해 차세대 인터넷 프로토콜 IPv6에 대한 연구가 활발히 진행되고 있다. 그러나 새로운 프로토콜 IPv6 상에서 기존의 다른 상위 프로토콜 및 응용이 어떠한 영향을 받게 될지는 의문이다. 한편, IPv6 상에서 새로운 프로토콜 및 응용을 개발할 때에 많은 시험이 요구된다. 이와 같은 이유로 인해 새로운 통신 프로토콜에 있어서 모니터링은 필수적이다. 그러나 지금까지의 많은 모니터링 라이브러리들은 텍스트에 기반하고 있으며, 그래픽 데이터를 제공하는 도구들도 대부분 통계정보의 제공에 초점을 두고 있다. 이를 두고 프로토콜이 그 표준에 따라 정확한 원리에 맞게 동작하는 지를 파악하는 데는 큰 도움이 되지 않고 있다. 이에 본 연구에서는 대상 프로토콜의 실제적인 동작 과정이나 원리를 알 수 있도록 그래픽 기반의 사용자 친화적 모니터링 도구를 제작한다. 이를 위해, 먼저 IPv6가 다른 프로토콜에 영향을 미칠 수 있는 사항들을 분석한다. 다음으로 본 교에 구축되어 있는 IPv6 호스트에 모니터링에 필요한 환경을 구축하고, Java Applet을 이용한 모니터 프로그램을 제작한다. 현재 개발하는 모니터 프로그램은 TCP의 슬라이딩 윈도우(Sliding Window) 기법에 관련된 사항을 모니터링 해주는 것으로 그 범위를 한정한다. 개발된 도구를 이용하여 IPv6 상에서 FTP가 TCP를 이용하여 파일을 전송하는 경우의 모니터링을 실시하고, 그 결과를 분석 제시한다. 이로써, 개발된사용자 친화적 모니터링 도구가 얼마나 쉽게 슬라이딩 윈도우 기법을 이해시켜 주고, 내포된 의미를 파악할 수 있게 해주는지를 알 수 있다.한 것으로 연구되었다. 정상조 직에 비해 산소가 부족하여 염기성대사(anaerobic metabolism)를 많이 함으로 그 부산물인 유산 (lactic acid)이 많이 생성됨으로 정상조직보다 pH가 낮아 암 조직이 정상조직에 비해 고온온열치료에 더 잘 듣는 원인이 된다. 3) 영양이 부족한 상태의 세포는 고온온열치료에 훨씬 예민하다. 4) 암조직은 혈관상태가 정상조직에 비해 좋지 않음으로 정상조직보다 쉽게 가온이 되며, 일단 가온된 온도는 잘 식지 않음으로 정상조직에 비해 훨씬 효율적이다. 5)고 온온열치료는 4$0^{\circ}C$~43.5 $^{\circ}C$정도에서만 이 작용이 일어남으로 정상인체에서 43$^{\circ}C$이상의 가온 은 쉽지 않음으로 이 효과는 암조직에서 주고 일어나게 된다. 6)고온온열치료는 방사선치료 후에 생기는 손상의 재생을 억제함으로 방사선의 치료효과를 높인다. 7)38.5$^{\circ}C$~41.5$^{\circ}C$의 낮 은 온도에서도 암조직의 산소 상태를 호전시켜 방사선 치료효과를 증대시키는 역할을 한다.alization)가 나타난다. 그러나 무의식에 대칭화만 있는 것은 아니며, 의식의 사고양식인 비대칭도 어느 정도 나타나며, 대칭화의 정도에 따라, 대상들이 잘 구분되어 있는 단계, 의식수준의 감정단계, 집단 내에서의 대칭화 단계, 집단간에서의 대칭화 단계, 구분이 없어지는 단계로 구분하였다.systems. We believe that this taxonomy is a significant contribution because it ad

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.174-182
• /
• 2014

To monitor the wind-induced responses of buildings, conventional real-time kinematic (RTK) methods based on two global positioning system (GPS) receivers (e.g., a reference and a rover) are widely applied. However, these methods can encounter problems such as difficulty in securing and maintaining a space for a reference station. With the recently developed virtual reference station (VRS)-RTK approach, the position of a structure can be measured using only a rover receiver. In this study, to evaluate the applicability of VRS-RTK methods in monitoring the lateral structural responses of frame structures, we performed free vibration tests on a one-story frame model (the first natural frequency of 1 Hz) and a three-story frame model (the first natural frequency of 0.85 Hz). To assess the reliability of the displacement and acceleration responses measured by the GPS, we performed a concurrent measurement using laser displacement sensors and an accelerometer. The accelerometer results were consistent with the GPS measurements in terms of the time history and frequency content. Furthermore, to derive an appropriate sampling rate for the continuous monitoring of buildings, the errors in the displacement responses were evaluated at different GPS sampling rates (5, 10, 20 Hz). The results indicate that as the sampling rate increased, the errors in the displacement responses decreased. In addition, in the three-story model, all modal components (first, second, and third modes) could be recorded at a sampling rate of 20 Hz.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.09a
• /
• pp.119-125
• /
• 2010

본 연구에서는 항공 라이다 데이터로부터 지표의 유형을 분류하는 과정에서 필요한 처리시간을 감소시켜 보다 효율적인 지형 분류가 가능하도록 타일 단위의 샘플링을 이용한 지형 분류 기법을 제안하였다. 또한 실험을 통하여 샘플링 정도에 따라 정확도와 시간효율을 비교분석하여 최적의 샘플링 정도를 제시하였다. 본 연구에서 제안한 타일 단위의 샘플링을 이용한 지형 분류기법을 이용해 자연재해내 도시 구조 변화 등의 지형정보의 변화를 탐지하기 위한 모니터링 목적으로 활용할 경우에 지형분류의 정확도 손실을 최소화하면서 빠른 처리가 가능하기 때문에 실시간 서비스가 가능해 질 수 있다.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.1
• /
• pp.69-79
• /
• 2023

In this study, an experimental study was conducted on the development of crack monitoring technology in buildings using a mechanochromic sensor. After attaching a mechanochromic sensor to the cracks induced in the concrete specimen, the color variation image of the sensor according to the progress of the cracks was taken. In addition, a method of analyzing a sensor color variation image was proposed, and an equation for deriving a crack's width from the relationship between the analysis result and the crack width was also proposed. In addition, the possibility of using an mechanochromic sensor for monitoring cracks in buildings was confirmed through the verification of crack width monitoring technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.265-271
• /
• 2018

This paper presents a method for detecting damage to a structure at low cost using its impedance. The impedance technique is a typical method to detect local damage for structural health monitoring. This is a common technique for estimating damage by monitoring the electro-mechanical admittance signal of the structure. To apply this technique, an expensive impedance analyzer is generally used. On the other hand, it is necessary to develop a low-cost variant to effectively disseminate the technique. In this study, a method based on the transfer impedance using a function generator and digital multimeter, which are generally used in the laboratory instead of an impedance analyzer, was developed. That is, this technique estimates the damage by comparing the damage index using the amplitude ratio of the output voltage measured in the healthy and damaged state. A transfer impedance test was carried out on a steel specimen. By comparing the damage index, the presence of damage could be assessed reasonably. This study is a basic investigation of an impedance-based low-cost damage detection method that can be used effectively for structural health monitoring if supplemented with future research to estimate the damage location and severity.

• The KIPS Transactions:PartC
• /
• v.10C no.3
• /
• pp.335-344
• /
• 2003

In accordance with the changes in the wireless communication environment, there has been a great need to satisfy the demand for diverse modes of information exchange. Various types of short-distance wireless communication technology have been developed and studied to meet this demand. Among them, Bluetooth and WLAN which has recently been acclaimed as the standard for short-distance wireless communication, has been the focus of many such studies. However, Bluetooth and WLAN has weaknesses in its security features when its in real services are applied to m-commerce. The purpose of this study is to propose techniques that affinity considers to item that is non-security enemy who is although there is no public secure division direct connection in peculiar environment of radio environment as well as limitation security enemy of short distance radio communication. Propose secure monitoring techniques for straggling device to user center also applying proposed way to Bluetooth and WLAN that are short distance communication representative technology based on item that is security enemy and item that is rain suity enemy.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.8
• /
• pp.1109-1116
• /
• 2001

This paper describes a mechanism and its aspects for monitoring user actions and behaviors on the web operated under the layered architecture that utilizes intelligent agents, and by which personalized information services, for instance one-to-one marketing, is easily facilitated and developed. Intelligent agent is one of techniques which enables to automate the whole process for providing personalized services that includes monitoring, logging a user actions and analyzing behaviors based on his or her profiles, and then selecting, organizing customizable contents which are at last delivered to the users browser or mail box also by intelligent agents. Monitoring technologies can utilize to help better construct the process in providing personalized services in that those services require intelligence in operating. As a result, implementing effective personalized services, however, depends on how well to define various users interests and needs, and how correctly to detect and log the actions when hey are done by users.

• Journal of KIISE:Software and Applications
• /
• v.27 no.4
• /
• pp.315-326
• /
• 2000

As Internet is being widely used as an infra of distributed applications, the most of today's softwares are changing into Internet-based distributed applications. The development methods using the middleware, like CORBA ORB, make the development of the web-based software easy. However, the performance verification method useful for an optimized software distribution is not provided at software development. Additionally, monitoring methods and metrics for dynamic load-balancing are not presented at run-time. This paper presents the method to monitor the message between objects, load metric, and metrics for load-balancing. To calculate a load of a node, we define events occurred between applications, time between the events, then extract the data related to a load. And we derive formula calculating the load from the extracted data. Then using the formula, we present the metrics for dynamic load-balancing. Moreover, we observe the utilization and efficiency of the monitoring algorithm, load metric, and load-balancing metrics.

• Journal of Korea Water Resources Association
• /
• v.51 no.11
• /
• pp.1011-1020
• /
• 2018

This study aims to develop a drought monitoring scheme based on groundwater which can be exploit for water supply under drought stress. In this context, groundwater level can be used as a proxy for better understanding the temporal evolution of drought state. First, kernel density estimator is presented in the monthly groundwater level over the entire national groundwater stations. The estimated cumulative distribution function is then utilized to map the monthly groundwater level into the standardized groundwater level index (SGI). The SGI for each station was eventually converted into the index for major cities through the Thiessen polygon approach. We provide a drought classification for a given SGI to better characterize the degree of drought condition. Ultimately, we conclude that the proposed monitoring framework enables a more reliable estimation of the drought stress, especially for a limited water supply area.