• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.240-244
• /
• 2003

후막 리소그라피 기술은 기판 위에 감광성 페이스트를 도포한 후 자외선과 패턴마스크를 사용하는 광식각(photolithography) 방법을 이용하여 세부 패턴을 형성시키는 기술이다, 이 기술은 후막기술로서는 높은 해상도인 선폭 $30{\mu}m$ 이하의 미세도선을 구현할 수 있어, 후막기술을 이용한 고주파 모듈의 제조에 있어서 새로운 대안으로 주목받고 있다. 본 연구에서는 알루미나 기판 상에 수십 ${\mu}m$ 이하의 마이크로 비아를 가지는 유전체 층을 형성시킬 수 있는 저온소결용 감광성 유전체 페이스트를 개발하였다. 저온소결용 유전체 파우더와 폴리머, 모노머, 광개시제 등의 양을 조절하여 마이크로 비아를 형성할 수 있는 최적 페이스트 조성을 연구하였으며, 노광량 및 현상시간과 같은 공정변수가 마이크로 비아의 해상도에 미치는 영향을 평가하였다. 알루미나 기판에 전면 프린팅 한 후 건조, 노광, 현상, 소성 과정을 거쳐 소결전 $37{\mu}m$, 소결후 $49{\mu}m$의 해상도를 가지는 마이크로 비아를 형성할 수 있었다.

• Resources Recycling
• /
• v.11 no.3
• /
• pp.31-36
• /
• 2002

Magnetic separation was carried out in order to improve the magnetite grade of the spent iron oxide catalyst, that was composed with magnetite, ceria and soluble alkaline salt. The recovery of magnetite from the spent iron oxide catalyst was over 99%, and the magnetite contents was upgraded to about 80% from 70% via wet type magnetic separation at 500 Gauss. This improvement was due to the removal of alkaline salt by water instead of the magnetic separation.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.4
• /
• pp.173-177
• /
• 2007

A photo-reactive methacrylate monomer having triazine as a core component was examined for photochromic diffractive image formation. Photochromic photopolymer films as a recording media contained a monomer mixture of triazine difunctional metharylate (DT) and ethylene glycol phenyl ether acrylate, binder polymer, photo initiator, and a photochromic spiro-oxazine dye. The content of photochromic dye was changed to examine the effect of photochromophore on diffraction efficiency and real holographic image formation. Holographic recording was performed on the photopolymer film by the combination of reference and probe beam. The diffraction efficiency of the photopolymer film in real-time measurement reached a maximum of $\sim90%$ within 30s. It was highly dependent on the photochromophore contents. After holographic recording, the color of the recorded area was changed under UV light (365 nm) and reversibly bleached to original color upon exposure to a visible light source. Films containing only photochromophore without monomer mixture were not reactive under the recording beam (491nm). Diffractive image formation and mechanism of the holographic recording in the presence of photochromophore will be presented.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.322-325
• /
• 2008

3,3-Dimethyl-1-butene ($C_6H_{12}$) monomer was deposited using a plasma-enhanced chemical vapor deposition (PECVD) instrument. The more the R.F. power/pressure ratio in FT-IR spectrum, the less the hydrogen quantity and the dangling bond in amorphous carbon films observed so that the mechanical property of the films are improved related to the density. Also, with the increase D peak in Raman spectrum is increased and the ring structure's films are produced. According to these results, hardness and modulus are 12 GPa and 85 GPa, respectively. The refractive index (n) and extinction coefficients (k) of the deposited films are increased with the increase in a power/pressure ratio.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.3
• /
• pp.246-251
• /
• 2019

A solvent free, highly concentrated silica-acryl monomer hybrid sol was synthesized using aqueous colloidal silica as a precursor. The effects of the silica particle size, type of surface treatment agent employed, and silica content on the formation of the hybrid sol were systematically studied. The optical and physical properties of the coating solution prepared using the hybrid sol were also characterized. The viscosity of the hybrid sol tended to decrease as the particle size of the silica and the molecular weight of the surface treatment agent increased. The PET substrate coated with MPTMS-Mix (mixture, 70 wt%) solution showed the highest surface hardness (6 H) and low surface roughness ($Ra=0.044{\mu}m$), which could be attributed to an increase in packing density caused by the infiltration of small particles into the pores formed between larger particles.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.267-267
• /
• 2019

The purpose of this study is to understand the risk of chemical product, Styrene Monomer(SM), shipped in a vessel. SM is harmful chemical product which can make injury, explosion and/or fire in a vessel. The understand of SM risk is very important to protect seafarer's body and vessel safety. This research can be expected that the understanding of SM risk by a seafarer's to prevent accidents by SM explosion/fire. In this study we used event tree analysis method using chemical reaction cased by explosion. As a result, we founded various chemical reaction and visualization for explosion path.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.48-57
• /
• 2014

In this study, we have investigated the influence of the nature of solvent on the grafting reaction of maleic anhydride onto polyethylene wax obtained as a by-product in a high density polyethylene plant. The results show that the grafting ratio in xylene as a solvent was higher than toluene. This is because xylene has excellent monomer solubility, swelling property and miscibility. It has been also observed that grafting degree shows an initial jump in percentage of grafting with increasing amount of solvent, from 0% v/w to 200% v/w giving maximum grafting in 200% v/w and then slightly decreases on further increase in the amount of solvent and becomes almost constant. It can be also seen that gel content was not formed under the use of solvent. It means that solvent prevented cross-linking reaction due to chain transfer reactions to solvent molecules. Studies of melt viscosity at $140^{\circ}C$ showed that viscosity increased after grafting of maleic anhydride onto polyethylene wax.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.676-680
• /
• 2011

Investigated was the effect of the crucial polymerization conditions such as methyl acrylate(MA) mole fraction in feed, polymerization temperature and time on Atom Radical Transfer Polymerization(ATRP) behavior of styrene and methyl acrylate(MA). As MA mole fraction in feed increased, molecular weight(MW) of the resulting copolymer increased. At polymerization time of 3 hrs the composition of MA in the resulting copolymer was shown to have a linear relationship with the mole fraction of MA in feed. MW was increased and the composition of MA in copolymer was decreased as the polymerization time increased, showing the characteristics of ATRP. MW was also increased as polymerization temperature increased, and the composition of MA in copolymer was shown to be increased drastically at polymerization temperature of $110^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.439-444
• /
• 2015

Several attempts to design the best-available thermosetting road markings by using MMA to improve the durability and retroreflectivity are presented in this paper. In order to improve field applicability, the components of main materials were designed by means of reducing the hardening time lower than eight minutes. The optimum mixing ratio of thermosetting road marking was TSRM-6 composed of 15.6 wt% of MMA monomer ($Tg=105^{\circ}C$), 6.0 wt% of PMMA (MW = 70,000, $Tg=60^{\circ}C$) and 1.2 wt% of TMPTA (MW = 338, $Tg=27^{\circ}C$). Also the homogeneous mixing of all components was necessary. The use of ceramic glass beads with an optimized TSRM-6 exhibited excellent performance by achieving retroreflectivity coefficients of 431, 354 and $172mcd{\cdot}m^{-2}{\cdot}lux^{-1}$ for dry, wet and rainy test condition, respectively at two hundred thousand cycles.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.394-398
• /
• 1998

An optimum synthetic condition was studied for the MCS used as a silicone monomer. The contact mixture was made from the four component catalyst system($CuCl/ZnCl_2/Sn/Cd$) and silicon particles. The contact mass was used for a series of experiments with methyl chloride, which were designed and done to explore the optimum condition for MCS synthesis by an experimental design method. The optimum temperature and MeCl flow rate, which were obtained using 50g contact mass at 60rpm and 1 atm, were in the range of $300-305^{\circ}C$ and of 70-80ccm. Also a continuous run was performed to confirm the conditions. The results showed that the average reaction rate and selectivity were 170(g-MCS/hr.kg-Si) and 0.05 respectively at 67% conversion of MeCl and 92% silicon utilization rate. Also the parameters of overall reaction rate equation and a total pressure were estimated on the basis of the results of the continuous run.