• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.97-100
• /
• 2007

A fluidized bed reactor made of quartz with 0.055 m I.D. and 1.0 m in height was employed for the thermocatalytic decomposition of methane to produce $CO_2$ - free hydrogen . The fluidized bed was proposed for the continuous withdraw of product carbons from the reactor. The methane decomposition rate with the carbon black N330 catalyst was quickly reached a quasi-steady state rate and remained for several hour. The methane and propane mixture decomposition reaction was carried out at the temperature range of 850 - 900 $^{\circ}C$, methane and propane mixture gas velocity of 1.0 $U_{mf}$ ${\sim}$ 3.0 $U_{mf}$ and the operating pressure of 1.0 atm. Effect of operating parameters such as reaction temperature, gas velocity on the reaction rates was investigated. The produced carbon by the methane decomposition was deposited on the surfaces of carbon catalysts and the morphology was observed by TEM image.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.3
• /
• pp.299-306
• /
• 2008

This study has been conducted to derive the bio-energy, hydrogen and methane production, from mixture of food wastewater and swine wastewater, the high strength organic wastewater and to increase effluent quality. To overcome this limitation in one-phase anaerobic process, two-phase anaerobic process combining hydrogen fermenter and methane fermenter was applied. In this system $2,323ml\;H_2/L$ was produced daily from Run II where 500 ml of heattreated sludge in methane fermenter was injected, and methane produced from methane fermenter did not show big difference regardless of the amount of returning sludge at each Run. It was concluded that the two-phase anaerobic process was the appropriat process to produce hydrogen and methane simultaneously and stably. Influent $TCOD_{Cr}$ to two-phase anaerobic process showed the range of 132~145 g/L(average 140 g/L), and effluent $TCOD_{Cr}$ range was 25~40 g/L(average 32 g/L), and organic removal efficiency showed 71~82%(average 76.3%).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.261.1-261.1
• /
• 2014

지구상에 존재하는 모든 생물에 의해 배출되는 이산화탄소는 온실가스로써 산업혁명 이후 급격한 농도 증가로 인해 지구 온난화 등의 다양한 환경문제를 초래하고 있다. 지구 온난화의 가시화로 인한 각종 기후 협약 및 탄소배출권 등에 규제로 온실가스 감축의무부과가 확실해져 탈 석유기반 사회로 전환을 위한 이산화탄소를 처리하는 다양한 연구가 각국에서 활발히 진행 중이다. 본 연구에서 마이크로웨이브 플라즈마 토치를 이산화탄소 분해에 이용하게 되었고 그 목적은 이산화탄소가스를 마이크로웨이브로 가열하여 순수한 이산화탄소 플라즈마 토치를 발생함으로서 지구 온난화의 주범인 이산화탄소를 생산적으로 이용하기 위한 것으로 전자파를 발진하는 마그네트론으로는 3kW, 2.45GHz의 주파수를 사용한다. 마이크로웨이브 플라즈마 토치를 이용한 이산화탄소의 분해 시 생성되는 물질을 확인하기 위하여 이산화탄소의 열역학적 평형을 계산하였으며 또한 이산화탄소의 분해 반응의 준 평형상태에서의 속도상수를 이용하여 각 분해반응생성물들의 밀도비율을 계산하였고, 이를 일반화시켜 도시하였다. 위 과정을 통해 고온의 이산화탄소 토치는 탄화수소 연료를 1기압에서 개질할 수 있음을 알 수 있다. 예를 들어 메탄개질은 $CO_2+CH_4{\rightarrow}2CO+2H_2$의 반응식이 된다. 이때 엔탈피와 엔트로피 변화는 각 각 ${\Delta}H=247kJ/mole$과 ${\Delta}S=257J/mole/deg.$이며 이 반응에 대한 gibbs 자유에너지는 $G={\Delta}H-T{\Delta}S$로서 개질 자발반응이 일어나는 온도는 $T={\Delta}H/{\Delta}S=961K$가 된다. 그리고 탄화수소 개질에 참여하는 산소와 CO 라디칼의 밀도가 대단히 높다. 따라서 메탄개질은 이산화탄소 토치를 통하여 1기압에서 쉽게 이루어진다.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.267-274
• /
• 2009

Considerable attention has been given to developing methodologies to reduce the emission of carbon dioxide from industry to meet strengthened environmental regulations. In this article, recent research trends on dry reforming of methane as an alternative method to reduce $CO_2$ emission from large scale industrial processes are addressed. To efficiently provide the energy needed in this strong endothermic reaction without additional $CO_2$ emission, it seems to be desirable to adopt autothermal reaction mode. The produced synthesis gas could be used as a reducing gas, or a feedstock for synthesis of chemicals and fuels.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.11
• /
• pp.942-948
• /
• 2007

Popular techniques for producing hydrogen by converting methane include steam reforming and catalyst reforming. However, these are high temperature and high pressure processes limited by equipment, cost and difficulty of operation. Low temperature plasma is projected to be a technique that can be used to produce high concentration hydrogen from methane. It is suitable for miniaturization and fur application in other technologies. In this research, the effect of changing each of the following variables was studied using an AC GlidArc system that was conceived by the research team: the gas components ratio, the gas flow rate, the catalyst reactor temperature and voltage. Results were obtained for methane and hydrogen yields and intermediate products. The system used in this research consisted of 3 electrodes and an AC power source. In this study, air was added fur the partial oxidation reaction of methane. The result showed that as the gas flow rate, the catalyst reactor temperature and the electric power increased, the methane conversion rate and the hydrogen concentration also increased. With $O_2/C$ ratio of 0.45, input flow rate of 4.9 l/min and power supply of 1 kW as the reference condition, the methane conversion rate, the high hydrogen selectivity and the reformer energy density were 69.2%, 32.6% and 35.2% respectively.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.275-281
• /
• 2011

Solar reforming of methane with $CO_2$ was successfully tested with a direct irradiated absorber on a parabolic dish capable of $5kW_{th}$ solar power. The new type of catalytically activated metallic foam absorber was prepared, and its activity was tested. Ni was applied as the active metal on the gamma - alumina coated Ni metal foam for the preparation of the catalytically-activated metal foam layer. Compared to conventional direct irradiation of the catalytically-activated ceramic foam absorber, this new metallic foam absorber is found to exhibit a superior reaction performance at the relatively low insolation or at low temperatures. In addition, unlike direct irradiation of the catalytically-activated ceramic foam absorber, metallic foam absorber has better thermal resistance, which prevents the emergence of cracks caused by mechanical or thermal shock. The total solar power absorbed reached up to 2.1kW and the maximum $CH_4$ conversion was almost 40%.

• New & Renewable Energy
• /
• v.19 no.2
• /
• pp.1-12
• /
• 2023

In this study, an efficient one-dimensional model was developed for predicting microchannel steam/methane reformers with thin washcoat catalyst layers with a focus on low-pressure reforming conditions suitable for distributed hydrogen production systems for fuel cell applications. The governing equations for steam/methane mixture gas flowing through the microchannel reformer were derived considering the species conservation with reforming reactions and energy conservation with external convective heat supply. The reaction rates for the developed model were simply determined through the catalyst effectiveness factor correlations instead of performing complicated calculations for the steam/methane reforming process occurring inside the washcoat catalyst layers. The accuracy of the developed was verified by comparing the results obtained herein with those obtained by the detailed computational fluid dynamics calculation for the same microchannel reformer.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.2
• /
• pp.119-127
• /
• 2021

The objective of this study was to evaluate effects of feeding methods on in vitro ruminal fermentation, total gas and methane production in Hanwoo steers. Six Hanwoo steers fitted with rumen cannula (430 ± 21 kg of body weight) were randomly assigned to one of three feeding systems: 1) feeding forage 1 hour after concentrate, 2) feeding concentrate 1 hour after forage, 3) feeding mixed ration. Rumen fluid sampled from each animals was incubated 24 hours with maize or timothy substrates in in vitro. Ruminal pH was increased in feeding method 2 or maize substrate than that of other methods or timothy substrate (P < 0.001). The production of total volatile fatty acid, acetate, propionate, butyrate, and valerate were increased when steers fed diets using feeding method 1 or rumen fluid was incubated with maize substrate (P < 0.001). Increased production of total gas and methane was observed in feeding method 1 and maize substrate compared to those of other methods or timothy substrate (P < 0.001). Due to the inconsistent results between ruminal fermentation and gas production in this study, further research is required to estimate effects of feeding method on enteric fermentation and gas production in in vivo.

• Journal of Energy Engineering
• /
• v.23 no.1
• /
• pp.33-39
• /
• 2014

This study was performed with electrolysis treatment method for improving anaerobic digestion gas production efficiency in a sewage sludge, thereby confirmed in anaerobic digestion production and denitrification effect. As a result, solubilization was increased by increasing treatment time of electrolysis and current density, also showed to be 9.02% with 10 mA/cm2 of current density in 4 mm electrode distance. Based on the results of BMP test used the above experiment, methane production was 0.49 L CH4/g VS, and increased by 88.4% compared with control groups. As for the results of denitrification using the sewage sludge treated with the same conditions, denitrification rate appeared $19.2mg\;NO_3{^{-}}N/g\;MLVSS{\cdot}hr$, and through the sewage sludge treated with electrolysis, it can be applied to anaerobic digestion and denitrification process by increasing biodegradation.

• Journal of the Korean Institute of Gas
• /
• v.22 no.2
• /
• pp.67-71
• /
• 2018

The calorific value of general synthetic natural gas(SNG) mainly composed of methane is $9,300kcal/m^3$ or less. In order to use such synthetic natural gas as city gas in Korea, it is necessary to heat up to $10,200kcal/m^3$. Generally, propane gas is commonly used to control the calorific value of SNG. However, the price of propane gas has fluctuated widely and has been higher than the cost of producing SNG. So if the high-calorie SNG can be produced directly instead of the calorie control by propane mixing, the production price of SNG can be significantly reduced. In this paper, based on the US NETL analysis, we compare the cost of methane based SNG production and the cost of high-calorie SNG direct production.