• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2892-2897
• /
• 2008

Plasma techniques have been proposed to generate a hydrogen enrich gas to investigate a feasibility of plasma techniques on a fuel reforming, we considered a dry reforming and a partial oxidation with methane in the atmospheric pressure. For these experiments, we employed an arc jet plasma reactor. The effects of input power and oxidizer in each process were investigated by product analysis, including carbon monoxide, hydrogen, ethylene, propane, and acetylene as well as methane and carbon dioxide. In both processes, input electrical power activated the reactions significantly. The increased ratio of the carbon dioxide to methane in the dry reforming doesn't affect to a methane conversion, whereas increased ratio of oxidizer to methane in the partial oxidation was very effective for the reaction. Moreover, for a simultaneous treatment of methane and carbon dioxide, a feasibility of a dry reforming combined with partial oxidation also has been investigated.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.103-106
• /
• 2006

The Plate reformer consisting of combustion chamber and reforming chamber for 25 kW MCFC stack has been operated and computational fluid dynamics was applied to estimate reactions and thermal fluid behavior in the reformer. The methane air 2-stage reaction was assumed in the combustion chamber, and three step steam reforming reactions were included in the calculation. Flow uniformity, reaction rate and species distribution, and temperature distribution were analyzed. In particular, temperature distribution was compared with the measurements to show good agreement in the combustion chamber, however, inappropriate agreement in the reformer chamber

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.89-92
• /
• 2006

수소에너지는 화석연료 사용의 증가로 인한 환경오염 및 자원고갈의 문제점을 해결해 줄 수 있는 미래의 청정한 에너지이다. 현재 주 에너지원인 화석연료의 사용에 의하여 배출된 오염물질이 지구온난화와 같은 문제점들을 일으킨다. 이러한 문제점들을 없애줄 수 있는 대안 중 하나가 수소에너지이다. 수소에너지는 자원이 풍부하며 연소시에 오염물질이 배출되지 않는 장점이 있다. 수소에너지는 수소를 연소시켜서 얻는 에너지로써, 수소를 태우면 같은 무게의 가솔린 보다 3배나 많은 에너지를 방출한다. 수소를 생산하는 방법 중 가장 이상적인 방법은 물을 분해하는 방법이다. 그러나 이 방법은 수소를 대량으로 생산하기에는 아직 기술에 대한 확보가 되어있질 않으며, 경제성도 떨어진다는 단점이 있다. 현재 많이 쓰이는 방법 중 탄화수소류의 메탄을 수증기 개질하는 방법이 있다. 메탄 수증기 개질방법은 환경오염물질인 CO나 $CO_2$를 배출한다는 것과 높은 열원이 필요하다 본 연구에서는 C-H결합에너지가 낮아 메탄보다 분해하기 쉬운 부탄의 직접분해로 수소를 생산하고자 한다. 부탄 직접분해는 환경오염물질인 CO나 $CO_2$가 발생되지 않는 장점이 있다. 부탄 분해반응은 $500{\sim}1100^{\circ}C$의 범위에서 이루어 졌으며, 촉매는 탄소계인 카본블랙을 사용하였고, 촉매의 성능을 비교하기 위하여 열분해반응이 동시에 수행되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.735-738
• /
• 2009

촉매 생산에서 마지막으로 중요한 단계는 촉매성형이다. 여기서 압출성형은 촉매 성형방법 중 저렴하고 비교적 간단한 방법 중 하나이다. 여기서 중요한 것은 바인더의 선택과 입자 사이즈가 가장 중요한 요인이 된다. 촉매 압출성형에서 많이 쓰이는 바인더로 PVA(Polyvinyl Alcohol)와 MC(Methyl Cellulose), CMC(Carboxymethyl Cellulose)가 있다. CMC 바인더의 경우, 촉매의 접착력이 현저히 떨어져 촉매의 바인더로 사용하기 어려웠다. PVA, MC 바인더의 경우, 촉매의 접착력이 우수하고 압출성형이 잘 되었다. 그러나 PVA 바인더의 경우, 열중량 분석을 통해 재 소성과정에서 바인더가 완전히 제거되지 않아서 촉매의 물성 변화 및 활성에 좋지 않은 영향을 주었다. 그러나 MC의 경우에는 재소성과정에서 바인더가 완전히 제거되어 촉매의 물성변화에 영향을 주지 않았으며, 촉매의 활성 변화에도 영향을 주지 않았다. 그래서 메탄 수증기 개질 촉매의 압출 성형에 적합한 바인더로 MC가 적합하다고 판단된다. 그리고 압출용 반죽 제조를 위한 미분쇄된 촉매 입자의 사이즈에서 너무 작은 입자를 사용하게 되면 반죽은 잘 되나 촉매의 물성변화로 인해 촉매 활성이 저하되는 것을 알 수 있었다. 그래서 볼밀로 정밀하게 입자 사이즈를 $10{\mu}m$ 이하로 조절하면 촉매 활성에 영향이 거의 없는 압출성형 촉매를 제조할 수 있다.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.267-274
• /
• 2009

Considerable attention has been given to developing methodologies to reduce the emission of carbon dioxide from industry to meet strengthened environmental regulations. In this article, recent research trends on dry reforming of methane as an alternative method to reduce $CO_2$ emission from large scale industrial processes are addressed. To efficiently provide the energy needed in this strong endothermic reaction without additional $CO_2$ emission, it seems to be desirable to adopt autothermal reaction mode. The produced synthesis gas could be used as a reducing gas, or a feedstock for synthesis of chemicals and fuels.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.208-208
• /
• 2009

메탄의 수증기-이산화탄소 복합개질반응에서 니켈 촉매의 탄소 침적 저항성에대한 Ce 증진 효과를 살펴보기 위해, Ni-Ce/${\alpha}-Al_2O_3$ 촉매를 제조하였다. Ce/Ni 비율 변화에 따른 촉매 비표면적, Ni 입자 분산도 및 촉매 활성 변화를 살펴보았고, Ce 첨가량을 최적화 할 수 있었다. Ce/Ni 비율 증가에 따라 NiO 결정크기가 감소하고 표면적과 Ni 분산도는 증가하였다. 특히, Ce/Ni=0.5 첨가 시, 촉매는 가장 넓은 비표면적과 Ni 분산도를 가졌으며, 우수한 촉매 활성 및 높은 탄소 침적 저항성을 보였다. 또한, 본 연구에서는 Ni과 Ce 담지 방법에 따른 Ni 분산도 향상과 Ni과 Ce간의 접촉 면적 극대화를 통한 활성산소 공급 향상에 대한 영향을 함께 살펴보았다. Ni과 Ce를 동시 함침법과 연속 함침법으로 담지하여 비교한 결과, 동시 함침법으로 제조한 Ni-Ce/${\alpha}-Al_2O_3$ (Ce/Ni=0.5) 촉매가 가장 우수한 촉매 성능 및 높은 탄소 침적 저항성을 보였다. 이는 동시 함침법으로 고분산된 Ni 입자와 담체간의 강한 상호작용 형성과 원활한 활성 산소 공급에 기인한 것이다.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.275-281
• /
• 2011

Solar reforming of methane with $CO_2$ was successfully tested with a direct irradiated absorber on a parabolic dish capable of $5kW_{th}$ solar power. The new type of catalytically activated metallic foam absorber was prepared, and its activity was tested. Ni was applied as the active metal on the gamma - alumina coated Ni metal foam for the preparation of the catalytically-activated metal foam layer. Compared to conventional direct irradiation of the catalytically-activated ceramic foam absorber, this new metallic foam absorber is found to exhibit a superior reaction performance at the relatively low insolation or at low temperatures. In addition, unlike direct irradiation of the catalytically-activated ceramic foam absorber, metallic foam absorber has better thermal resistance, which prevents the emergence of cracks caused by mechanical or thermal shock. The total solar power absorbed reached up to 2.1kW and the maximum $CH_4$ conversion was almost 40%.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.4
• /
• pp.13-19
• /
• 2005

The reaction of steam reforming of methane with commercial catalysts was conducted for thermochemical heat storage. The reaction conditions were investigated for temperature range of 700 to $900\;^{\circ}C$ and steam to carbon mole ratios between 3.0 and 5.0. The reactor was made of stainless steel and it's dimension was 12 cm inside diameter and 6cm long. The effects of space velocity and reactants mole ratio and temperature on the methane conversion and CO selectivity were examined. Optimum reaction condition was determined. There was not a significant difference of methane conversion and CO selectivity compared to conventional reactor.

• New & Renewable Energy
• /
• v.19 no.2
• /
• pp.1-12
• /
• 2023

In this study, an efficient one-dimensional model was developed for predicting microchannel steam/methane reformers with thin washcoat catalyst layers with a focus on low-pressure reforming conditions suitable for distributed hydrogen production systems for fuel cell applications. The governing equations for steam/methane mixture gas flowing through the microchannel reformer were derived considering the species conservation with reforming reactions and energy conservation with external convective heat supply. The reaction rates for the developed model were simply determined through the catalyst effectiveness factor correlations instead of performing complicated calculations for the steam/methane reforming process occurring inside the washcoat catalyst layers. The accuracy of the developed was verified by comparing the results obtained herein with those obtained by the detailed computational fluid dynamics calculation for the same microchannel reformer.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.6
• /
• pp.749-760
• /
• 2022

An efficient computational fluid dynamics model was proposed for simulating microchannel-type steam/methane reformers with thin washcoat catalyst layers. In this model, by using the effectiveness factor correlations, the overall reaction rate that occurs in the washcoat catalyst layer could be accurately estimated without performing the detailed calculation of heat transfer, mass transfer, and reforming reactions therein. The accuracy of the proposed model was validated by solving a microchannel-type reformer, once by fully considering the complex steam/methane reforming (SMR) process inside the washcoat layer and again by simplifying the SMR calculation using the effectiveness factor correlations. Finally, parametric studies were conducted to investigate the effects of operating conditions on the SMR performance.