• Journal of the Korean Society of Clothing and Textiles
• /
• 제27권12호
• /
• pp.1434-1440
• /
• 2003

개망초로부터 색소를 추출, 분말화하여 FT-IR 분석을 행하고, 모섬유에 대한 염색조건과 매염이 염착량(K/S값) 및 색상에 미치는 영향을 조사하였다. 또한 염색한 시료의 견뢰도를 측정하여 실용성을 확인하였다. 개망초 색소는 모섬유에 높은 친화력을 보였으며, Langmuir형의 등온흡착곡선을 보여 염착이 주로 이온결합에 의해 이루어지는 것으로 나타났다. 염착략이 pH 3.0에서 최대가 되었으나 강한 산성조건은 강도 저하를 비롯한 섬유에 손상을 주기 때문에 pH를 조절하지 않고 염색하였다. 피염물의 색상은 모두 Y 계열을 나타내었다. 철매염 처리한 경우를 제외하고 매염처리가 염착량 증진에 미치는 영향은 그다지 크지 않았으며, 매염제 종류를 달리하여 염색한 모섬유의 색상은 크롬과 주석으로 매염한 경우 YR 계열을 나타내고 그 밖의 매염제에 의해서는 Y 계열의 색상을 나타내어 큰 변화는 없었다. 매염처리하지 않은 시료의 견뢰도는 매우 양호하였으며 매염처리가 견뢰도 증진에 미치는 영향은 크지 않았다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.43-43
• /
• 2012

본 연구에서는 대량으로 손쉽게 구 할 수 있는 식물염료를 확보하여 새로운 천연색소자원을 탐색하기 위해서 진행되었으며, 시료의 최적 추출 조건을 확립하고 추출된 색소의 실크에 대한 염색 특성을 살펴 최적 염색조건을 설정하고, 염색견뢰도를 평가하여 수수 등겨 추출물의 천연색소로의 활용에 대한 기초 자료를 마련하고자 하였다. 수수 색소 추출 시 생산성과 편리성을 고려하여 추출은 pH 4, 추출온도 $60^{\circ}C$, 추출시간 24시간이 적정조건으로 제시되었으며, 수수 추출물에 함유되어 있는 탄닌의 최대흡수파장은 282nm로 나타났다. 견직물의 pH에 따른 염색 특성은 pH가 증가할수록 K/S값이 증가하여 염착량이 증가하였으며, 염색온도가 높을수록 염색시간이 길어질수록 염착량이 증가하는 경향을 보여주고 있다, 염색온도가 높을수록 염색시간이 경과될수록 색상은 $Y{\rightarrow}YR$로 변화되는 것을 알 수 있었으며 염색온도가 높을수록 채도가 증가하였다. 욕비가 클수록 염착량은 감소하였으나, 채도는 약간 증가하는 것을 알 수 있었다. 매염제 처리에 의한 색상변화에서는 Al, Ni 매염은 색상변화는 적었지만, Cu와 Fe 매염은 명도와 채도를 크게 감소시키고 아울러 색상도 Cu는 적갈색으로 Fe는 진회색으로 변화되었다. Sn과 Ti 매염에 의해서 명도는 약간 감소하고 채도는 약간 상승하여 연한 주황색으로 색상이 변화하였다. 설정된 조건에서 염색된 염색포의 일광견뢰도는 2~3급, 세탁견뢰도 변퇴색은 2~3급, 오염은 4~5급으로 나타났다. Fe로 매염된 염색포의 일광견뢰도는 증가하여 3~4급으로 나타났으며, 매염제 처리에 의한 세탁 견뢰도는 같거나 약간 증가되는 것으로 나타났다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.42-42
• /
• 2012

팥에 함유되어있는 색소와 관련된 연구 중에서는, 검정팥의 색소성분을 분리하여 delphinidin-3-glucoside(D-3-G)로 보고한 Sasanuma의 연구와 검정팥 껍질속에 포함된 안토시아닌의 함량을 평가한 Yoshida의 연구 결과 등이 있다. 본 연구에서는 검정팥 종피에서 색소를 추출하여, 적정 염색조건을 설정하였으며, 매염제별 색상변화 및 견뢰도를 측정하는 과정을 통해 염색 특성을 파악하여 새로운 천연염재로서의 활용 가능성을 진단하였을 뿐만 아니라 응용 연구를 위한 기초자료의 확보에 주안점을 두었다. pH에 따른 염색성에서는 견직물의 경우 pH 4에서 가장 염착량이 많았고, 면직물의 경우에는 주어진 범위내에서는 pH가 높을수록 염착량이 많았다. 염색온도와 시간에 따른 염색성은, 견직물의 경우, 염색온도 $80^{\circ}C$에서는 시간이 경과할수록 K/S 값이 크게 나타났으며, 면직물의 경우도 견직물과 비슷한 결과로 온도가 높아질수록 염색시간이 경과될수록 K/S 값이 크게 나타났다. 견직물에 대한 매염제 종류별 표면색의 변화에서는 Fe 매염포만 $YR{\rightarrow}Y$ 로 변화되었을 뿐 다른 매염제에서는 매염 후에도 색상 변화는 크지 않았다. 매염처리 전 견직물의 일광 견뢰도는 무매염이 4~6등급, Al 처리포는 4~5등급, Cu와 Sn은 3~4등급으로 나타났고 Fe는 2~3등급으로 가장 낮게 나타났으며, 세탁견뢰도에서는 무매염 2등급, 매염제 처리의 경우 2~3등급으로 나타났다. 무매염 면직물의 일광견뢰도는 1~2 등급, Fe 매염은 2~3등급, Cu 2등급 Al과 Sn은 1~2등급으로 매염처리에 의해 전혀 개선되지 않았으며, 세탁견뢰도의 경우 Cu매염이 4등급으로 양호하게 나타났으며 무매염, Al, Sn과 Fe는 3등급으로 나타났다.

• Current Research on Agriculture and Life Sciences
• /
• 제30권2호
• /
• pp.76-81
• /
• 2012

In this study the natural colorant was extracted from black bean seed coat in aqueous solution and used to dye silk and cotton fabrics. To obtain the optimal dyeing conditions it was examined at various dyeing condition (temperature, pH, time and liquor ratio). The dyeing behavior and the depths of shade which were evaluated in terms of K/S and CIELAB color difference values of the dyed and mordanted fabrics were also investigated. The dyeing fastness evaluated standard light and wash fastness tests. The obtained results were as follows ; The most K/S value of silk and cotton fabrics were obtained when the pH was 4.0 and 4.8, respectively and it increased slightly with dyeing time passes when the dyeing temperatures were at $40^{\circ}C$ and $60^{\circ}C$ but, it increased at $80^{\circ}C$. The color of silk fabrics changed from yellowish red to yellow at only Fe mordanting among various mordanting. Sn and Ti mordanting of silk fabric and only Ni mordanting of cotton fabric increased the $L^*$ values, but the others decreased. The light fastness of silk fabrics showed 4-6 grade without mordant, 4-5 grade with Al, 3-4 grade with Cu and Sn, and 2-3 grade with Fe as mordant, and that of cotton fabrics showed 1-2 grade without mordant, 2-3 grade with Fe, 2 grade with Cu, 1-2 grade with Al and Sn as mordants. All mordanting coluld not improve the light fastness of fabrics. Washing fastness(fade) of silk fabrics showed 2 grade without mordants and 2-3 grade with mordants and those of cotton fabrics showed 4 grade with Cu, 3 grade without mordant and with Al, Sn and Fe. All of the washing fastness(stain) of both fabrics showed 4-5 grade.

• The Journal of Natural Sciences
• /
• 제11권1호
• /
• pp.143-150
• /
• 1999

A natural dyeing makes fabrics look unique and elegant which cannot be obtain by synthetic dyestuffs. The natural dyestuffs are harmless to human, and it is easy to get them. Also, the natural dyestuffs are environmentally frendly, which is the anther merit for natural dyeing,We investigated dyeability with several fabrics (cotton, wool, ramie, silk and nylon) using an elm bark. We mordants(natural and synthetic). Also, colorfastness in dyed fabrics was estimated by laundering and light. The optimum condition of dyeability in elm bark was 60 min as time, $80^{\circ}C$ as temperature and 1: 40 as bath ratio. The dyeability in silk and nylon was the best among the sample. The treatment of mordants improved the dyeability and colorfastness in silk, wool and nylon. We obtain various color by the mordants.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제28권12호
• /
• pp.1625-1631
• /
• 2004

The purpose of this study was to investigate dyeing properties of cotton fabrics by American fleabane extract. Effect of dyeing condition on dye uptake and effect of mordanting on dye uptake, color change and colorfastness were explored. Its affinity to cotton fiber was considerably lower than wool, and its hydrogen bonding was involved in the absorption of American fleabane colorants to cotton fiber. K/S value of pre­mordanting was higher than sim-mordanting or post-mordanting. Except that Sn mordanted showed high K/S value, it did not significantly increase. American fleabane produced mainly yellowish color on mordants and mordanting method. Cotton fabrics showed generally high colorfastness except colorfastness to washing.

• Journal of the Korean Society of Costume
• /
• 제55권5호
• /
• pp.101-107
• /
• 2005

In this article, mordant absorption rate by the Change of temperature and fabric, discharge level by water washing, mordant density and method in mordant dye are going to be handled. Besides, how treatment method will have an effect on absorption rate and color, is also going to be covered. An atom extinction photometer was used to measure the amount of mordant absorbed in fabric at each temperature and mordant type. It turned out that absorption rate differs according to the type of mordant and sample or temperature. Also it turned out that the mordant input amount has little influence on absorption rate, that is to say, if though you use more mordants, just tiny amount of mordant is going to be absorbed in cloth. It is true that the higher temperature goes up, the better mordant absorption gets. It is found that the type of mordant and sample, treatment period affects the discharge rate. Normally $15{\~}98\%$ mordant comes off the fabric by water washing, to be specific, $17{\~}47\%$ Iron by water washing and it has better performance on cotton and nylon than silk, $1\%{\~}52\%$ Aluminum by water washing and better absorption on silk, $36{\~}89\%$ Chrome by water washing and better absorption on silk, $50{\~}89\%$ copper by water washing and better absorption on silk, poor on cotton. The examination of the K/S values and colors between before and after soaping has been conducted under the circumstance that the test fabrics had been treated at $80^{\circ}C$ for 30 minutes with $0.2\%$ soaping solution. In case of pre-mordanted fabrics, the K/S value nosedived after soaping, meanwhile densely mordanted fabric's K/S value soared but after soaping, it dropped sharply. It turned out that soaping treatment deteriorates absorption much more than water washing. It's considered that $0.1 \%$ (W/V) of mordant density is appropriate.

• Journal of Internet of Things and Convergence
• /
• 제6권4호
• /
• pp.33-38
• /
• 2020

It was reported that a mobile application was designed to easily provide natural dyeing information such as natural dye related resources, colors and dyed fabrics in 2007. Since studies on the linkage, application, etc. between natural dye dyeing and IoT are still lacking, diversity of information on the change of dyeing pattern by natural dye dyeing is required. In this study, it was to construct dyeing information by natural dyes, e.g., Lithospermum erythrorhizon, on silk, which has been traditionally used as many fibers in Korea. The extraction of the dye from L. erythrorhizon was carried out under pH4. The dried root of L. erythrorhizon showed dark brownish purple. Silk fabric by a without a mordant typically showed a purple dyed pattern. In the staining by sodium tartrate plus citric acid, silk fabric was stained clear brown. Interestingly, the mordant of iron (II) sulfate, the silk fabric was dyed in a light gray color rather than black. When the mordant of aluminum potassium sulfate was treated with L. erythrorhizon-extracted dye, the results were almost the same as when the mordant was not treated. When the degree of dyeing was evaluated numerically, the treatment of the mordant of potassium dichromate was about 50% darker, and the dyeing by iron (II) sulfate was about 75% darker. These results will be helpful in the study of applying various dye colors using L. erythrorhizon, and it will provide information on dyeing controller and database system construction by dyeing parameters such as dyeing degree, pH concentration, and chromaticity change.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제33권12호
• /
• pp.1971-1978
• /
• 2009

This study investigated the adsorption of safflower yellow dye on wool protein fiber and the optimum dyeing conditions to test color reproducibility. In addition, the effects of mordants on dye adsorption, color, fastness, and photofading rate were also studied. The prepared dye in powder form was characterized with UV-vis spectroscopy and FT-IR spectrometric analysis. The color of dyed fabrics was characterized by CIE $L^*a^*b^*$ coordinates, H V/C, and K/S values. The color reproducibility of the dyed wool fabrics was examined. The amount of dye adsorption increased and also, the shade of the dyed wool fabrics became deeper and more saturated with increasing temperature, time, and dye concentration. The maximum color strength was obtained at pH 3.0. The shade of dyed wool fabrics ranged from light yellow to dark mustard yellow as the pH of the dye bath shifted from alkaline to acidic. Color reproducibility was reliable with color differences in the range of 0.53~1.75. Fastness to dry cleaning was relatively good at 4/5 rating irrespective of mordanting. Fe and Cu mordants showed the least color change of the dyed wool fabrics after exposure to light. Mordants did not contribute to improve dye uptake and color fastness, although they made variations in color tone. Safflower yellow dye can be used satisfactorily without mordants and will not cause damage to the environment.

• Journal of Sericultural and Entomological Science
• /
• 제48권2호
• /
• pp.46-55
• /
• 2006

In this thesis, we took some stalks, flowers, and leaves of the Serratuls coronate var. insularis which are able to propagate as mass n our wild to extract the dyeing solution, and cotton and silk were dyed using them in many different conditions. Silk was dyed darker than cotton. We found there was not a big difference between silk and cotton in the given condition considering 'Y' values vs. dyeing temperature. There was a rapid decreasing of 'Y' values after one to two hours and almost all of dyeing was completed at these times. We found there was a dyeing acceleration at the higher dyeing density and the lower 'Y' value. If the density was low, dyeing attachment was reduced by dyeing ability via the density of liquid in both plants. Silk was affected higher by mordant dyes in both plants. Fe and Cu had an effect by mordant dyes slightly an Serratuls coronate var. insularis.