• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1988.06a
• /
• pp.43-48
• /
• 1988

보호피막을 입히는 방법으로는 화학증착법과 물리증착법이 주로 사용되고 있다. 고온 분위기에서 기체 상태인 반응물의 화학반응을 통하여 원하는 물질을 증착시키는 화학증착법은 물리증착법에 비해 점착성(adhesion)이 우수하고, 보호피막층의 성분조절이 용이하며, 반응물이 기체상태이므로 대량생산이 용이하여 보호피막 증착법으로 많이 사용되고 있다. $Si_3N_4$-TiC ceramic 표면에 TiC, TiN 및 Ti(C, N) coating을 함으로써 얻을 수 잇는 장점들은 표면층의 경도를 증가시키며, steel과의 마찰계수의 감소 및 coating 층 자체가 고온에서 고체 윤활제로 작용하여 마찰열의 상당한 감소를 얻을 수 있으며, 또한 coating층 자체가 비교적 안정한 화합물로 피삭재내의 성분원소들에 대한 diffusion barrier로 작용되며, 내식성을 증가시킬 수 있다. 본 연구에서는 각 증착층의 미소경도, 열충격저항, steel과의 마찰계수를 측정하였으며, 최종적으로 절삭시험을 통하여 증착층들의 내마모성을 조사, 규명하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.194-194
• /
• 1999

다이아몬드 박막은 결정립에 의해 심한 표면 거칠기를 나타낸다. 루비를 상대재료로 사용하여 하중 50g, 50rpm의 회전속도로 마모시험을 하였으며 마모 track의 직경은 100mm였다. 마찰계수는 0.5에서 계속 감소하며 0.1이하에서 안정한 상태를 유지하게 된다. 이 다이아몬드 박막위에 저마찰재료로 알려진 PTFE를 타겟으로 RF로 증착한 후 같은 조건으로 마모시험을 행하면 마찰계수가 초기부터 일정하게 유지할 수 있게 된다. 반면에 MoS2박막이 증착된 경우에는 완만한 마찰계수의 감소가 나타난다. 이러한 변화의 원인으로는 DLC 박막에서 보고되고 있는 바와 같이 다이아몬드의 sp3 결합구조가 마모시험중 흑연화하여 sp2 결합구조로 변하기 때문인 것인지 살펴보기 위하여 micro Raman을 통하여 마모 track을 분석하였고 AFM을 통하여 표면거칠기 변화와 표면 스크래치 발생 여부를 살펴보았다.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.3
• /
• pp.9-15
• /
• 2003

An experimental study has been carried out as a basic research for development of the friction drag reduction technology for ships by polymer injection. Experimental apparatus and procedures have been devised and prepared to measure the changes of the wall friction with injection of a polymer solution and basic experimental data on the friction drag reduction are obtained for a turbulent fiat-plate boundary layer and fully-developed channel flows. Variations of the friction drag reduction with some important parameters of polymer injection, such as the concentration of polymer solution, its injection flow rate and the measuring position downstream from the injection slot, are also investigated. Important experimental data and results obtained in the present study are presented. The amount of friction drag reduction up to 50% is observed.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.3
• /
• pp.1-8
• /
• 2003

For the experiment of the friction drag reduction by microbubble injection, a drag reduction water tunnel was specifically designed and made. Experimental apparatus and procedures were devised and developed for measuring the change of wall friction drag with microbubble injection. For fully-developed channel flows. the change of friction drag with important parameters of microbubble injection is investigated and the experimental data and results obtained are presented. The amount of friction drag reduction up to 25% is observed in the present study.

• Geotechnical Engineering
• /
• v.10 no.4
• /
• pp.39-52
• /
• 1994

The group effect of inclined ground anchor should be considered in design, but it has been hardly studied due to the difficulties of experimental or theoretical study. In this study, the model tests for the inclined ground anchors are made, and the displacements and strain fields of ground around anchor surface are analysed. As the results of this study, the group effect of the inclined ground anchor in air dried sand ground does not show even though two anchor surfaces are very close(10.7cm, surface to surface). That is to say, ,in the case that the final failure surface by pullout of anchor shows on the anchor surface, the pullout resistances of single anchors are almost same as those of the group anchors in these model tests.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.1
• /
• pp.1-7
• /
• 1976

1) The decrease in strength of netting twines at the knot may be regarded to be due mainly to the frictional force acting on the tip of the knot. The knot strength T may be given by $$T=\frac{T_0}{1+{\mu}\frac{s}{\rho}\varrho^{\mu\theta}$$ were $T_0$ is the tensile strength of unknotted netting twines, $\mu$ the coefficient of friction beween two netting twines forming a knot, s the contact length between the tip and the netting twine compressing it, $\rho$ the radius of curvature of the compressing, and $\theta$ the angle at which the compressing rubs with another one in the vicinity of the opposite tip. 2) Knots are arranged in order of strength as follows : the reef knot pulled lengthwise $\risingdotseq$ the trawler knot pulled breadtwise the reef knot pulled breadthwise.

• Journal of Energy Engineering
• /
• v.11 no.4
• /
• pp.299-305
• /
• 2002

The present experimental and numerical investigations are performed on the characteristics of transitional flow in a concentric annulus with a diameter ratio of 0.52, whose outer cylinder is stationary and inner one rotating. The pressure losses and skin-friction coefficients have been measured for the fully devel-oped flow of water and that of 0.2％ CMC-water solution at a inner cylinder rotational speed of 0∼600 rpm, respectively. The transitional flow has been examined by the measurement of pressure losses to reveal the relation of the Reynolds and Rossby numbers with the skin-friction coefficients. The occurrence of transition has been checked by the gradient changes of pressure losses and skin-friction coefficients with respect to the Reynolds numbers. The increasing rate of skin-friction coefficient due to the rotation is uniform for laminar flow regime, whereas it is suddenly reduced for transitional flow regime and, then, it is gradually decreased for turbulent flow regime.

• Geotechnical Engineering
• /
• v.14 no.4
• /
• pp.103-116
• /
• 1998

To estimate pure shear strength, 150 sets of triaxial test data were analyzed. The proportional coefficient of shear strength($I_c$) at zero normal stress was nonlinearly decreased as failure coefficient m increases, while the internal friction $\phi_0$ at zero normal stress was nonlinearly increased. The ratio of shear strength $(c/\phi_0)$was inversely proportional to the ratio of the internal friction angles$(\phi/phi_0)$ The shear strength decreased as m increased, while internal friction angle increased. And uniaxial strength was proportional to $c,\phi$ Regression analysis showed that shear strength strongly affects m and $\sigma_c$ The proportional coefficient of shear strength was nonlinearly increased with RMR, while the internal friction angle $(\phi}$was linearly decreased.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.12
• /
• pp.1025-1032
• /
• 2006

This is to characterize the fluid mechanics of surfactant water solutions, which exhibit drag reduction in the turbulent flow as compared to pure water. The emphasis is placed on those fluid characteristic aspects of drag reducing solutions which are relevant for application in closed circulation loops for the purpose of pumping power savings, like hydronic cooling and heating systems in buildings. The experiments are carried out with the solutions of the surfactant Beraid DR-IW 616 in concentration of $100{\sim}3,000ppm$. The following key parameters are focused in this study: surfactant concentration, solution temperature and pipe diameter.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.357-361
• /
• 2005

부유사 입자를 난류 흐름 중에 투입하면 유속의 연직 분포를 다소간 변화시키는 것으로 알려져 왔다. 1946년에 Vanoni가 Karman 상수의 감소를 제안한 이후 이것은 상당한 논쟁을 불러 왔다. 본 연구에서는 입자 추적유속계(PTV)를 이용하여 개수로 중의 난류와 유사의 속도를 직접 측정하고, 이 자료를 분석하여 부유사 입자가 개수로 난류의 유속 분포에 어떻게 영향을 미치는 가를 구명하였다. 또한 기존의 연구의 측정 자료들과 그들의 주장을 재검토하였다. 분석 결과 부유사 입자는 Karman 상수를 다소 감소시키는 것으로 나타났다. 이 감소 현상은 물과 유사의 상대적인 속도 분포로 설명할 수 있다. 다만 Karman상수의 감소 정도는 종래의 연구자들이 주장한 것보다 상당히 작다. 이처럼 차이가 나는 이유는 종래의 연구들이 Karman 상수의 산정 방법이나 이용한 자료의 선택에서 문제가 있었기 때문이다. 또한, 난류 중에 투입된 부유사는 마찰 속도에는 그다지 영향을 미치지 않는 것으로 나타났다.