• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4A
• /
• pp.324-329
• /
• 2009

In this paper, a novel Snowflake-shaped microstrip patch antenna for application in the WLAN(5.2/5.8GHz) band is designed and fabricated. The size of antenna is $21.2{\times}16mm^2$ and substrate is used Taconic-RF30. To obtain sufficient bandwidth in Return loss <-10dB and dual resonance characteristic, the Short-pin is inserted on the patch and the coaxial probe source is used. The measured results of fabricated antenna show 220MHz and 135MHz bandwidth in Return loss <-10dB referenced to the WLAN(5.2/5.8GHz) band. The measured antenna gain is $4.7{\sim}6.9dBi$ in the WLAN(5.2/5.8GHz) band. The experimental 3-dB beam width in I-plane and H-plane are $73.2^{\circ}/82.75^{\circ}$ for 5.1500Hz, $74.56^{\circ}/83.63^{\circ}$ for 5.3500Hz, and $86.24^{\circ}/85.15^{\circ}$ for 5.7850Hz, respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.167-174
• /
• 2005

Smaller size and higher integration of electronic components make smaller gap between metal conducting layers in electronic package. Under harsh environmental conditions (high temperature/humidity), electronic component respond to applied voltages by electrochemically ionization of metal and metal filament formation, which lead to short failure and this phenomenon is termed electrochemical migration(ECM). In this work, printed circuit board(PCB) is used for determination of ECM characteristics. Copper leads of PCB are soldered by eutectic solder alloys. Insulation breakdown time is measured at $85^{\circ}C,\;85{\%}RH$. CAF is the main mechanism of ECM at PCB. Pb is more susceptible to CAF rather than Sn, which corresponds well to the corrosion resistance of solder materials in aqueous environment. Polarization tests in chloride or chloride-free solutions fur pure metal and eutectic solder alloys are performed to understand ECM characteristics. Lifetime results show well defined log-normal distribution which resulted in biased voltage factor(n=2) by voltage scaling. Details on migration mechanism and lifetime statistics will be presented and discussed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.1
• /
• pp.21-28
• /
• 2020

In this paper, a new type of electric wheelbarrow is proposed and developed. The developed electric wheelbarrow is equipped with an attitude reference system(ARS) sensor, which consists of 3-axis acceleration sensor and 2-axis Gyro sensor so that it can estimate pitch angle and roll angle. When an operator tilts the wheelbarrow up and down, the pitch angle is detected. The sign of the pitch angle is interpreted as the operator's intention for moving the wheelbarrow forward or backward and the controller drives the wheel of the wheelbarrow with the velocity according to the magnitude of the detected pitch angle. A cargo box of the wheelbarrow is designed to rotate and is controlled to maintain level always, so an operator can handle the electric wheelbarrow easily and safely. The wheelbarrow consists of an in-wheel motor, a DC motor, motor drives, an ARS sensor considering economical use in industrial field. Three experiments are performed to verify the feasibility and stability of the electric wheelbarrow.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.2
• /
• pp.15-21
• /
• 2019

We investigated the structural, electrical and optical properties of zinc oxide (ZnO) ultra-thin films grown at $150^{\circ}C$ by atomic layer deposition (ALD). Diethylzinc and deionized water were used as metal precursors and reactants, respectively, for the deposition of ZnO thin films. The growth rate per ALD cycle was a constant 0.21 nm/cycle at $150^{\circ}C$, and samples below 50 cycles had amorphous properties due to the relatively thin thickness at the initial ALD growth stage. With the increase of the thickness from 100 cycles to 200 cycles, the crystallinity of ZnO thin films was increased and hexagonal wurtzite structure was observed. In addition, the particle size of the ZnO thin film increased with increasing number of ALD cycles. Electrical properties analysis showed that the resistivity value decreased with the increase of the thin film thickness, which is correlated with the decrease of the grain boundary concentration in the thicker ZnO thin film due to the increase of grain size and the improvement of the crystallinity. Optical characterization results showed that the band edge absorption in the near ultraviolet region (300 nm~400 nm) was increased and shifted. This phenomenon is due to the increase of the carrier concentration with the increase of the ZnO thin film thickness. This result agrees well with the decrease of the resistivity with the increase of the thin film thickness. Consequently, as the thickness of the thin film increases, the stress on the film surface is relaxed, the band gap decreases, and the crystallinity and conductivity are improved.

• Journal of the Korean Chemical Society
• /
• v.48 no.5
• /
• pp.483-490
• /
• 2004

We have developed a novel polymerase chain reaction (PCR)-microchip gel electrophoresis (MGE) method based on the sieving gel mixture of commercially available poly(vinylpyrrolidone) (PVP) and hydroxy ethyl cellulose (HEC) for the rapid detection and diagnosis of the orf virus (ORFV) from Korean indigenous goat. After amplification of 594-bp DNA fragment from the B2L gene of ORF virus, the amplicon was analyzed by the MGE separation. The glass microfluidic chip (64 mm total length (36 mm effective length)${\times}$90 ${\mu}$m width${\times}$20 ${\mu}$m depth) allowed the fast detection and diagnosis of ORFV in the mixture of 1.0% PVP ($M_r$ 360,000) and 1.0% HEC ($M_r$250,000) as a sieving matrix with better resolution and reproducibility of DNA fragments. Under the electric field of 277.8 V/cm, the 594-bp DNA was analyzed within 4 min. Compared to traditional slab gel electrophoresis, the PCR-MGE method was twenty times faster and an effective clinical method for the quantitative analysis of ORFV.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.827-830
• /
• 2000

3GPP and ETSI adopted AMR(Adaptive Multi-Rate) as a standard for next generation IMT-2000 service. In this paper, we analyzed algorithm about AMR and optimized ANSI C source on the C complier and assembly language of Texas Instrument . The implemented AMR speech codec requires 28.2MIPS of complexity for encoder and 5.5MIPS for decoder. we performed real-time implementation of AMR speech codec using 82% of TMS320C5402 with 40 MIPS specification. We give proof that the output speech of the implemented speech codec on DSP board is identical with result of C source program simulation. Also the reconstructed speech is verified in the real-time environment consisted of microphone and speaker.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.30-35
• /
• 2004

In a switched reluctance motor drive, it is important to synchronize the stator phase excitation with the rotor position, Therefore the position of rotor is an essential information. Although high resolution optical encoder/resolvers we used to provide a precise position information, these sensors are expensive. And switching angles synchronizing using sensorless technique has some problems like a reliability and fluctuating of the preset value in the high-speed region, which is caused by the sampling period of the microprocessor. In this paper, a low cost analog encoder suitable for practical applications is proposed. And the control algorithm to generate switching signals using a simple digital logic is presented. The validity of the proposed analog encoder with a proper logic controller is verified from the experiments.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.179-179
• /
• 2022

최근 화두가 되고 있는 환경문제 중 하나로 녹조현상을 꼽을 수 있다. 녹조란 남세균이 대량 증식함으로써 물빛이 녹색으로 변하는 현상으로, 영양염류 및 수온 등 이화학적 요소뿐만 아니라체류시간과 같은 수리학적 요인까지 모두 충족되었을 때 발생한다. 심하면 고밀도의 스컴(scum)을 형성하며 독소와 악취를 동반하기도 한다. 유해 남세균이 생성하는 마이크로시스틴(microcystin, MC)이 함유된 물을 입 또는 코로 섭취시 간을 손상시킨다는 보고가 있으며, 최근 해외에서는 MC가 미세먼지처럼 공기 중에 떠다니다 수변에서 생활하는 사람의 호흡기로 들어가 건강 피해를 줄 수 있다는 연구가 속속 나오고 있다. 본 연구는 우리나라 최초의 수질개선용 댐인 영주댐을 연구 대상으로 삼아 수질 모델링을 구축하고 영주댐 운영에 따른 댐 상·하류 조류 변화를 정량적으로 분석하였다. 조류의 강도를 추정하는데 클로로필-a 농도를 사용하였으며, 분석 도구로는 국립환경과학원이 수질예측 및 평가 시 사용하는 EFDC(Environmental Fluid Dynamics Code) 모형을 활용하였다. 대상 구간의 실제 폭, 하상고 분포 등을 고려하여 수표면 격자망을 구현하였으며, 환경부에서 제공하는 수위 및 DO, TN, T-P, 클로로필-a 등을 활용하여 EFDC 모형의 수리 및 수질 재현성 검토를 하였다. 검·보정된 EFDC 모형으로 영주댐의 방류량 변화 및 댐의 개방과 같은 수리학적 요인을 제어하여 특정 지점의 조류 변화를 분석하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1112-1115
• /
• 2006

모바일 GIS를 홍수재해관리 시스템에 도입하기 위한 목적은 홍수에 대비한 신속한 상황대처 통해 인명 및 재산피해를 최소화하는데 있다. 모바일 GIS 시스템 구축의 기본 방향은 하천유역에 대한 행정업무 및 정보화 업무의 효율성을 높여 현장업무에서 실시간으로 제공되는 수문정보 및 지형정보에 대한 다양한 컨텐츠를 주민들이 쉽게 접근하여 서비스를 제공받을 수 있도록 하고 현장 실무자가 하천 수위 및 유량을 관리하는 데 있어 즉각적인 조치를 가능하도록 하기 위한 것이다. 본 연구에서 이동 클라이언트와 홍수재해관리시스템 서버간의 무선통신채널은 AP(Access Point)를 통한 WLAN이나 CDMA망의 모바일 네트워크 또는 차세대 휴대인터넷 망을 대상으로 하였다. 홍수재해관리시스템은 ArcIMS, HTML, Java Script를 이용하여 구축하고 웹 서비스를 위해 마이크로소프트사의 IIS(Internet Information System) 사용하며, ArcIMS의 정상적인 구동을 위해 JRE(Java Runtime Environment)를 설치하도록 하였다. 주요 GIS 기능은 줌인, 줌아웃, 팬, 속성정보 검색, 거리측정, 버퍼링 기능 등이고 Layer는 침수위험건물, 대피건물, 침수지역 건물용도, 건물, 도로, 수계, 침수예상지역(100, 200년 빈도), 위성영상, DEM, 행정경계 등이 포함되도록 하였다. 시스템 구축에 사용될 데이터는 수리수문학적 데이터(유출량, 강우강도, 대상지역의 면적, Manning 계수 등)와 대상지역의 수치지도, DEM, 고해상 위성영상, 문헌조사와 현장조사를 통해 얻은 자료를 바탕으로 구성하도록 하였으며, 수리수문학적 데이터와 DEM 데이터를 바탕으로 침수지역 데이터를 생성하고 문헌조사와 현장조사를 통해 얻은 속성정보와 디지털 지도인 공간정보를 연결하기 위해 디지털 지도에서 건물 Layer, 도로 Layer, 등고선 Layer, 수계 Layer를 추출하여 ArcGIS에서 Coverage로 변환하여 위상관계를 설정한 후 다시 Shape 파일로 변환하여 속성정보와 연결시키도록 데이터베이스 구축방안을 제시하였다. 이와 같이 본 연구에서는 홍수재해 관리시스템에서 모바일 GIS를 적용하기 위하여 Pocket PC를 탑재한 이동 클라이언트인 PDA에 GPS 모듈을 확장하여 GPS 위성으로부터 위치정보를 획득하고 지리정보를 제공하는 모바일 GIS 서버간에 XML 기술을 이용하여 수문정보 및 지형정보 서비스를 제공하는 방안을 제시하였다.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.101-107
• /
• 2003

In this study, we provide a single element log-periodic antenna that the feeding networks and array structures are aperture coupled and series dipole array type. We made the antenna for direct receiving the Moogoongwha satellite broadcasting signal. The transmission power was able to feed the patch dipole in series due to lay perpendicularly 8 series patch dipole on tapered slot. The patch dipole radiation pattern which fed in series power, make the main beam direction up $37^{\circ}{\sim}42^{\circ}$ within the BS/CS bandwidth. The main beam gain was measured 9.31~11.03 dBi. Using 32 elements to array the elements properly, we acquire $4{\times}8$ array structure on limited PCB board. As a result, it has been found that the new planar DBS antenna structure have high gain over 10dBi and acceptable elevation angle over 42 degree, and we can apply this result to commercial DBS reception antenna manufacturing.