• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.1
• /
• pp.91-100
• /
• 1998

본논문에서는 현재 다 핀용 패키지로 주종을 이루고 있는 기존의 PQEP의 성능을 향상시키기 위하여 스트립 라인 배선 구조를 갖는 새로운 PQEP를 제안하였다. 기존의 208 핀 PQFP와 제안한 208핀 PQFP의 전기적 특성을 Ansoft사의 Maxwell TMA사의 Raphael 과 Avanti사의 HSPICE를 이용하여 시뮬레이션하여 비교하였다. 새로운 패키지에서는 신호 선과 파워버스라인을 스트립 구조로 만들고 감결합커패시터를 장착하여 크로스톡 잡음과 스 위칭 잡음을 크게 감소시켰다. 패키지의 리드프레임을 스트립구조로 만들기 위하여 구리가 도포된 유연성 쿠폰을 리드프레임의양측면에 부착하였다. 신호선의 특성 임피던스는 쿠폰의 유전층 두께변화를 조절함으로써 최적화하였고 유전층 두께가 100$\mu$mdlfEo 45$\Omega$의 값을 얻 었다. 시뮬레이션 결과와 측정결과 32개의 소자가 동시에 스위칭하고 전원/접지핀이 전체 리드 수의 33%일 때 동작주파수가 330Mhz됨을 확인하였으며 이는 기존 PQFP의 최대 동 작주파수인 100MHz에 비하여 3배 이상 향상됨을 보였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.3
• /
• pp.28-35
• /
• 1979

In the microstrip antenna, insulator is filled only between its main radiator and the base conductor. In experiment, it is verified that the characteristic of microstrip antenna at 94 % of the operating frequency coincide with the characteristics of the Practical antenna, if its characteristics are analyged to the case that the entire space of the antenna is filled with the same insulator Experimental results support the theoretical validity.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.1
• /
• pp.33-39
• /
• 1979

The resonance frequency of the slot-line resonator in the shielding box is analyzed. It is verified experimentally that an X-Band oscillator may be realized by the resonator in the microstrip circuit mount as a shielding cavity, and by shunt-connecting the IMPACT diode on the slot-line, And the oscillating power can be coupled with the microstrip by the coupling aperure on the opposite surface of the microstrip by the coupling aperure on the opposite of the substrate of the microstrip cirsuit.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.139-140
• /
• 2006

본 논문에서는 4포트 마이크로스트립 인터커넥트에 대한 새로운 등가모델을 제시하였다. 제시된 방법에서는 마이크로스트립 인터커넥트 중 선로의 방향이 변하는 부분에서 등가회로 파라미터인 커페시터 성분을 모델화하여 최적화 과정을 통해 값을 추출하였고, 시뮬레이션 결과와 측정치를 비교함으로써 등가회로모델의 유효성을 확인하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.26-32
• /
• 2002

When a spatial method of moments(MoM) is used in conjunction with closed-form Greens functions for the analysis of a general microstrip structures of thin or thick substrate, an efficient technique fur the evaluation of MeM off-diagonal matrix elements as well as diagonal elements is proposed. In order to check the validity of the present method, performance is demonstrated for the example of a coaxially-fed microstrip antenna and the present results are compared with the previous results.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.2
• /
• pp.11-18
• /
• 1991

In this paper, the analysis of arbitrarily shaped microstrip antennas is described. The analysis method is based on the transmission - line matrix representation for the interior problem and the moment method for the problem along the peripheries of the patch. Using this method, the input impedance and other antenna parameters are calculated and compared with experimental results for a circular and an equilateral triangular microstrip antenna. For all of the results, theoretical and expreimental results are in good agreement and the validity of the method is confirmed. This analysis can also be used to analyze microstrip antennas with shorting pins.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.12
• /
• pp.1-11
• /
• 1998

A line profile synthesis method is presented that minimizes the nearest-neighbor crosstalk peak level for high-speed pulse transmission in multi-coupled microstrip signal buses. We adopted the optimization technique for the reflected wave control on bus lines resulting in increasing the average spacing between strip conductors, since in a parallel-conductor bus the crosstalk energy is concentrated at the nearest neighbors of the driven line. The generalized S-matrix technique is applied for the input and output waveform prediction, and crosstalk characteristics of various nonuniform lines synthesized for increasing the average spacing are analyzed by comparing each other. Simulation results demonstrate that the Chebyshev taper with dips is adequate to significantly minimize the crosstalk peak level under the satisfactory waveform integrity since the profile is oriented to evenly reflect significant pulse spectra within the frequency range of pulse.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.937-942
• /
• 2007

A new, systematic, simplified design procedure for quasi-Yagi antennas is presented. The design is based on the simple impedance matching among antenna components: i.e., transition, feed, and antenna. This new antenna design is possible due to the newly developed ultra-wideband transition. As design examples, wideband quasi-Yagi antennas are successfully designed and implemented in Ku- and Ka-bands with frequency bandwidths of 53.2% and 29.1%, and antenna gains of $4{\sim}5 dBi$ and $ 5{\sim}5.6 dBi$, respectively. The design method can be applied to other balanced antennas and their arrays.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.119-126
• /
• 2019

In this paper, a monopole antenna applicable to WLAN standardization is designed, fabricated, and tested. The proposed antenna is designed to have three microstrip lines based on microstrip feeding method and inserted one stub to enhance impedance characteristics. Then, it obtained triple band characteristics of the proposed antenna. We adjusted and optimized the lengths and width of the three microstrip lines and one inserted stub to obtain the required impedance bandwidth for this paper. The proposed antenna has $23.0mm(W){\times}53.1mm(L1)$ on a dielectric substrate of $24.0mm(W1){\times}60.0mm(L){\times}1.0mm$ size. From the fabrication and measurement results, bandwidths of 158 MHz (841 to 1000 MHz) for 900 MHz band, 630 MHz (2.32 to 2.95 GHz) for 2400 MHz band, and 1,040 MHz (4.95 to 5.99 GHz) for 5000 MHz band were obtained based on the impedance bandwidth. The fabricated antenna also obtained the measured gain and radiation pattern characteristics in the required triple band of the proposed antenna.

• Journal of the Microelectronics and Packaging Society
• /
• v.2 no.2
• /
• pp.19-30
• /
• 1995

일반적으로 마이크로 웨이브 영역에 사용되는 마이크로스트립 전송로는 후막 전도 선을 이용하여 RF 모듈을 구현할수 있으나 선폭의 고해상도가 전체 특성에 큰 영향을 미치 므로 고정도의 박막을 이용한 RF 모듈이 많이 개발되고 있다. 따라서 본 논고에서는 박막 제조기술을 이용하여 마이크로 웨이브 하이브리드의 한 종류인 WILKINSON 전력 분배기 를 개발하였고 공정 변수를 최적화함으로써 고특성 고신회성의 전력 분배기를 구현할 수 있 었다. 먼저 전도선의 두께의 영향을 고찰하였으며 제조 공정에 있어 GROUND 방법 /HOUSING 형상을 개선함으로써 용이하게 전력 분배기를 제조하였다. 마지막으로 MIL 규 격에 따른 전력분배기의 신뢰성 시험 항목을 제시하였고 이에 따라 정격 전력을 계산, 측정 하였다.