• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.335-335
• /
• 2012

III-V 족 반도체 물질 중, GaN는 넓은 밴드갭을 가지고 있어 발광 다이오드나 레이저 다이오드, 트랜지스터, 스핀트로닉스 등의 응용에 유용한 물질이다 [1]. 실시간 성장 제어 및 최적화된 특정 소자 응용을 위해서는 GaN의 다양한 온도에 대한 유전율 함수 정보가 필수적이다. 편광분석법을 이용한 상온에서의 hexagonal GaN 유전율 함수는 이미 여러 연구에서 보고되었고, 80~650 K 사이의 온도 범위에 대한 언구도 수행되었다 [2,3]. 그러나, 온도변화에 대한 GaN 유전율 함수와 $E_0$ 전이점에 대한 해석은 부정확하다. 따라서 본 연구에서는 사파이어 기판 위에 분자살박막증착장치를 이용하여 c-축 방향 (0001)으로 성장 시킨 hexagonal GaN를 0.74~6.42 eV 에너지 구간에서 보다 확장된 온도 영역(26~693 K)의 유전율 함수를 편광분석법을 이용하여 측정하였다. 측정된 GaN의 유전율 함수를 회기분석법을 통한 2차 미분 표준해석법을 이용해 분석 하였고, 그 결과 $E_0$와 excitonic $E_0$ 전이점을 명확히 얻을 수 있었다. 온도가 감소함에 따라 격자상수 및 전자-포논 상호작용이 감소하여 전자 전이점이 청색천이 하고, 그 구조가 명확해 지는 결과를 얻었다. 본 연구의 결과는 GaN 유전율 함수의 온도 의존성에 대한 데이터베이스를 제공함은 물론, 실시간 모니터링과 GaN를 기반으로 하는 광소자 제작 등에 유용할 것이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.10
• /
• pp.46-52
• /
• 2004

A design methodology of the redundancy management for a duplex FBW flight control system is introduced. A statistical analysis is applied to determine two design parameters in CCM(Cross Channel Monitor), threshold and persistence count. An analytic redundancy, which is implemented using a Kalman filtering algorithm is considered. The application of an analytic redundancy to the FCS design of the smart UAV has several advantages of increasing the aircraft's survivability and breaking the tie-condition for a duplex FCS. All the redundancy management algorithms are verified through the numeric simulation for the flight dynamics of the XV-15 tilt rotor.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.5
• /
• pp.815-822
• /
• 2003

The ring rolling process involves not only three-dimensional non-steady material flow and continuous change of radius and thickness of the ring workpiece but also heat transfer among workpiece, rolls and environment. In this study, deformation and heat transfer analyses were conducted by using the three-dimensional thermo-rigid-plastic finite element method. Three cases of plain ring rolling process were, respectively, simulated for the predictions of roll forces and the highest temperature zone during the aluminum process that ductile fracture often occurs. In addition, to prevent fishtail phenomena of the ring workpiece, axial rolls were used for this study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.3
• /
• pp.275-283
• /
• 1991

A design method of the new 7${\lambda}$/6 ring 3dB directional coupler using fundamental /6-sections is proposed and its frequency characteristics are analyzed. Furthermore, the experimental verification has been achieved in microstrip network, and hence, the validity of the design method of a microwave compoennt with the basic ${\lambda}$/6-sections proposed in this paper is confirmed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.9
• /
• pp.1451-1456
• /
• 2003

In code roll forming processes, the sheet metal strip is gradually and successively bent into a desired profile. Occurrence of buckling is one of the major defects. Buckling may occur due to longitudinal stress and it is difficult to predict buckling behavior. In this study an analytical method for buckling behavior during roll forming is proposed. All numerical simulations are performed by finite element analysis. The behavior of buckling can be predicted with the simulation modeling of the finite element method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.201-206
• /
• 2000

In this work transfer function synthesis method based on FRF data of each substructure is investigated for a complex structure composed of many substructures. Though the transfer function synthesis method has superiority to analyze the characteristics of interfaces among substructures effectively, many problems arise in the computation process, especially matrix inversion process. Due to computational problems, the error between the data obtained by test and the predictions through computations is inevitable. So in this paper, computational aspects in the transfer function synthesis method are examined through a steering system problem of passenger car. For the FBS method, frequency response functions of 3 substructures are measured experimentally. Effects of several parameters such as matrix inversion method, connection conditions between substructures and off-diagonal terms on system response are studied numerically.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.41-46
• /
• 2006

The capability for reconstructing impact forces of an aircraft wing using impact response functions and regularization methods were examined. The impact response function which expresses the relation between the structure response and the impact force was derived using the information on mass and stiffness data of a finite element model for the wing. Iterative Tikhonov regularization method and generalized singular value decomposition method were used to inverse the impact response function that was generally ill-posed. For the numerical verification, a fighter aircraft wing was used. Strain and deflection histories obtained from finite element analysis were compared with the results calculated using impact response functions. And the impact forces were reconstructed with the strain histories obtained from finite element analysis. The numerical verification results showed that this method can be used to monitor impact forces on aircraft structures.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.27-36
• /
• 2013

LEM (Limit Equilibrium Method) based programs are commonly used for the designs of soil nailing as a slope reinforcement. However, there is a drawback that the interaction between ground and soil nailing is not properly reflected in those programs, which needs to be solved. For economical constructions and designs, research is also required on the support pattern of soil nailing. In this study, therefore, reinforcement effects of soil nailing were compared and analyzed by performing finite difference analyses which could properly consider the interaction between ground and soil nailing. As a result, when the angle from slope to nail is $90^{\circ}$, failure slip surface becomes the largest and thus the factor of safety becomes maximum.

• Economic and Environmental Geology
• /
• v.36 no.1
• /
• pp.49-58
• /
• 2003

To analyze the anisotropic characteristics of fractured aquifer, variations of streaming potential were measured during and after pumping over several wells at the two test sites. Surface electrical resistivity survey, normal resistivity logging, and slug test were performed at the wells to identify the hydrogeological structure. Applying the results to the recently suggested model, the aquifer of the two test sites showed confined characteristics. Anisotropic direction appeared in using equi-potential maps from self-potential monitoring results matched well with the results of the hydrogeological test. The self-potential monitoring method adopted in this study would be useful for providing a more reliable information on the anisotropy of aquifer in the pumping test at single well.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.10 s.115
• /
• pp.1024-1035
• /
• 2006

A three-dimensional (3-D) method of analysis is presented for determining the free vibration frequencies and mode shapes of thick, complete (circumferentially closed), circular rings with an elliptical or circular cross-section. Displacement components $u_r,\;u_\theta\;and\;u_z$ in the radial, circumferential, and axial directions, respectively, are taken to be periodic in ${\theta}$ and in time, and algebraic polynomials in the r and z directions. Potential (strain) and kinetic energies of the circular rings are formulated, and upper bound values of the frequencies are obtained by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four-digit exactitude is demonstrated for the first five frequencies of the rings. Novel numerical results are presented for the circular rings having an elliptical cross-section based upon 3-D theory. Comparisons are also made between the frequencies from the present 3-D Ritz method and ones obtained from thin and thick ring theories, experiments, and another 3-D method.