• Korean Journal of Materials Research
• /
• v.2 no.6
• /
• pp.408-416
• /
• 1992

Stable TiS$i_2$was formed by RTA on single-Si and on poly-Si. Subsequently, an Al-1% Si layer with 600-nm thick was deposited on top of the TiS$i_2$, Finally, the specimens were annealed for 30min at 400-60$0^{\circ}C$in $N_2$ambient. The thermal stability of Al-1% Si/TiS$i_2$bilayer and interfacial reaction were investigated by measuring sheet resistance, Auger electron spectroscopy (AES), and scanning electron microscopy (SEM). The composition and phase of precipitates formed by the reaction of Al-1% Si with Ti-silicide were studied by energy dispersive spectroscopy (EDS), X-ray diffraction (XRD). In the case of single-Si substrate the reaction of Al-1% Si layer with TiS$i_2$layer resulted in precipitates, consuming all TiS$i_2$layer at 55$0^{\circ}C$. On the other hand, the disappearance of TiS$i_2$on poly-Si occurred at 50$0^{\circ}C$ and more precipitates were formed by the reaction of Al-1% Si/TiS$i_2$on potty-Si substrate than those of the reaction on single-Si substrate. This phenomenon resulted from the fact that Ti-silicide formed on poly-Si was more unstable than on single-Si by the effect of grain boundary. By EDS analysis the precipitates were found tobe composed of Ti, Al, and Si. X-ray diffraction showed the phase of precipitates to be theT$i_7$A$l_5$S$i_12$ternary compound.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.75-85
• /
• 2009

This work proposes a 13b 100MS/s 0.13um CMOS ADC for 3G communication systems such as two-carrier W-CDMA applications simultaneously requiring high resolution, low power, and small size at high speed. The proposed ADC employs a four-step pipeline architecture to optimize power consumption and chip area at the target resolution and sampling rate. Area-efficient high-speed high-resolution gate-bootstrapping circuits are implemented at the sampling switches of the input SHA to maintain signal linearity over the Nyquist rate even at a 1.0V supply operation. The cascode compensation technique on a low-impedance path implemented in the two-stage amplifiers of the SHA and MDAC simultaneously achieves the required operation speed and phase margin with more reduced power consumption than the Miller compensation technique. Low-glitch dynamic latches in sub-ranging flash ADCs reduce kickback-noise referred to the differential input stage of the comparator by isolating the input stage from output nodes to improve system accuracy. The proposed low-noise current and voltage references based on triple negative T.C. circuits are employed on chip with optional off-chip reference voltages. The prototype ADC in a 0.13um 1P8M CMOS technology demonstrates the measured DNL and INL within 0.70LSB and 1.79LSB, respectively. The ADC shows a maximum SNDR of 64.5dB and a maximum SFDR of 78.0dB at 100MS/s, respectively. The ABC with an active die area of $1.22mm^2$ consumes 42.0mW at 100MS/s and a 1.2V supply, corresponding to a FOM of 0.31pJ/conv-step.

• Korean Journal of Environment and Ecology
• /
• v.26 no.6
• /
• pp.892-901
• /
• 2012

The purpose of this research was to analyze fish fauna, distribution patterns, and fish community structures in the Juksan-Weir regions of upper weir(R-UW) and lower weir(R-LW), which was constructed in 2011 on Yeongsan River watershed. Our outcomes will provide valuable information in the impact analysis of weir constructions next decades, even if the current research is limited to distributions and fauna studies of fishes. The fishes observed were 8 family and 30 species in all the sites, and the number of the species in the regions of R-UW and R-LW was 23(938 individuals) and 27(1,680 individuals), respectively, indicating greater abundance in the lower region of Juksan-Weir. Most dominant species was Opsarichthys uncirostris amurensis with relative abundance of 42%, and this species had greater abundance in the R-LW(49%) than in the R-UW(30%). Coilia nasus, was the migratory fish sampled in this region and had no differences of abundance between the two regions. The extic species observed were Carassius cuvieri, Lepomis macrochirus, and Micropterus salmoides. The two formers of Carassius cuvieri(1.2%) and Lepomis macrochirus(3.7%) dominated in the R-UW, whereas Micropterus salmoides had greater dominance in the region of R-LW. According to tolerance guild analysis, the proportion of sensitive species ranged from 0.4 to 0.5%, and that of tolerant species ranged from 65% to 70%, implying a severe pollution of nutrients and organic matters in the water body. In the mean time, according to trophic guild analysis, the proportion of carnivores(57 - 77%) was evidently higher than that of insectivores(10 - 20%), indicating a dominance of the carnivores. Especially, high abundance of the bass, exotic species, may disturb the fish overall food chain, so the efficient ecosystem management may be required for the conservation of endemic species. When we examined fish data files of last 60 years, the species of Culter brevicauda, designated as endangered species, was observed firstly in our research area and the total number was 5 individuals(0.2% of the total). So, this region observed should be conserved as a protection zone and further monitoring studies should be done in the future.

• Korean Journal of Environmental Biology
• /
• v.38 no.2
• /
• pp.299-307
• /
• 2020

This study reported on the phytoplankton community and seasonal changes in the Seoul passage section and downstream in the Han River in 2012. Field samples were collected monthly from the upper (Paldang), middle (Cheongdam), and downstream(Seongsan) areas of the Seoul passage section. Water temperature, DO, pH, and conductivity were measured at each station. All environmental factors measured were recorded similarly at the three stations. The water temperature ranged from 2 to 30℃ and the dissolved oxygen ranged from 4.8 to 9.1 mg L^-1, showing typical patterns of temperate regions. The phytoplankton cell concentrations ranged from 990 cells mL^-1 (Paldang, December) to 2.9×10⁴ cells mL^-1 (Seongsan, March), and the chlorophyll-a content showed similar patterns to the cell numbers. The phytoplankton community was comprised of 75 genera and 95 species, including 37 diatoms, 29 Chlorophyta, 11 cyanobacteria, and two dinoflagellates. The number of species that appeared seasonally varied greatly, from nine species (Paldang, May) to 35 species (Cheongdam, December). Diatoms were the most dominant in all stations and seasons, except in summer. In contrast, chlorophytes and cyanobacteria showed sporadic high numbers in the summer and fall seasons. Four diatoms Stephanodiscus hantzschii f. tenuis, S. hantzschii, Fragilaria sp., and Aulacoseira spp., a chlorophyte Actinastrum hantzschii, and a cyanobacterium Microcystis sp. were each present in proportions greater than 10%. This study provides fundamental data from phytoplankton communities and environmental factors in the Han River for understanding water quality for long-term environmental monitoring.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.535-543
• /
• 2008

Purpose: The objective of this study was to compare the bonding characteristics of a new self-adhesive resin cement to dentin, which does not require bonding and conditioning procedure of the tooth surface, and conventional resin cement. The effect of phosphoric acid etching prior to application of self-adhesive resin cement on the shear bond strength was also evaluated. Material and methods: Fortyfive non-carious human adult molars extracted within 6 months were embedded in chemically cured acrylic resin. The teeth were ground with a series of SiC-papers ending with 800 grit until the flat dentin surfaces of the teeth were exposed. The teeth were randomly divided into 3 experimental groups. In group 1, self-adhesive resin cement, RelyX Unicem (3M ESPE, Seefeld, Germany) was bonded without any conditioning of teeth. In group 2, RelyX Unicem was bonded to teeth after phosphoric acid etching. For group 3, Syntac Primer (Ivoclar Vivadent AG, Schaan, Liechtenstein) was applied to the teeth before Syntac adhesive (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Helibond (Ivoclar Vivadent AG, Schaan, Liechtenstein) followed by conventional resin cement, Variolink II (Ivoclar Vivadent AG, Schaan, Liechtenstein). To make a shear bond strength test model, a plastic tuble (3 mm diameter, 3 mm height) was applied to the dentin surfaces at a right angle and filled it with respective resin cement, and light-polymerized for 40 seconds. All the specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before test. Universal Testing Machine (Z020, Zwick, Ulm, Germany) at a cross head speed of 1 mm/min was used to evaluate the shear bond strength. The failure sites were inspected under a magnifier and Scanning Electron Microscope. The data was analyzed with One way ANOVA and Scheffe test at ${\alpha}$= 0.05. Results: (1) The shear bond strengths to dentin of RelyX Unicem was not significantly different from those of Variolink II/Syntac. (2) Phosphoric acid etching lowered the shear bond strength of RelyX Unicem significantly. (3) Most of RelyX Unicem and Variolink II showed mixed fractures, while all the specimens of RelyX Unicem with phosphoric acid etching demonstrated adhesive failure between dentin and resin cement. Conclusion: Shear bond strength to dentin of self-adhesive resin cement is not significantly different from conventional resin cement, and phosphoric acid etching decrease the shear bond strength to dentin of self-adhesive resin cement.

• Journal of Korean Society of Forest Science
• /
• v.106 no.2
• /
• pp.130-149
• /
• 2017

The subalpine zone which is vulnerable to climate change could be functioning as a habitat for northern plant species especially in the Korean peninsula. In this study, classification of phytosociological community type and investigation on flora of vascular plants of Daecheongbong area in Mt. Seorak were carried out in order to provide a basic information for an ecological restoration and management of the vegetation through community ecological approach. Vegetation data were collected from 31 of quadrates from May to October, 2016. We analyzed vegetation types with phytosociological method, importance value with Curtis & McIntosh method, CCA using PC-ORD program tool, and flora of vascular plants. As a result, the forest vegetation was classified into Abies nephrolepis community. The community was divided 3 groups such as Pinus pumila group, Rhododendron brachycarpum group and Angelica decursiva group. Therefore, the vegetation had 3 kinds of units. The differential species group, it was classified into total of 7 species group units including Thuja koraiensis and Smilacina bicolor differential species group. The mean importance percentage (MIP) in VU 1 was shown Pinus koraiensis (24.1), A. nephrolepis (23.6) and Betula ermanii (10.5), and in VU 2, it was P. koraiensis (26.2), A. nephrolepis (20.8) and B. ermanii (10.5), and in VU 3, it was P. koraiensis (22.2), A. nephrolepis (16.4), B. ermanii (13.5) in the order, respectively. As for importance values of P. koraiensis and A. nephrolepis representative competition species, were different at each layers. The former (46.7) was higher than the latter (26.1) in tree layer, but the latter was higher than the former in subtree and, shrub and herb layers of VU 1. VU 2 and VU 3 also indicated the same tendency. P. pumila group and A. decursiva group were shown to have positive correlation with altitude and present species, respectively. The designated as the endemic plant was 11 taxa and, as the rare plant 24 taxa and 62.5% of vascular plant was northern plant species. It is necessary to continue further long-term monitoring of 3 vegetation units, IV of main competition species (P. koraiensis and A. nephrolepis) with stratum and main specific species (rare plants and endemic plants) considering vegetation science and, population and community ecology approaches.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.440-447
• /
• 2020

The demand for large-scale horticultural complexes utilizing reclaimed lands is increasing, and one of the pending issues for the construction of large-scale facilities is to establish foundation design criteria. In this paper, we tried to review previous studies on the method of reinforcing the foundation of soft ground. Target construction methods are spiral piles, wood piles, crushed stone piles and PF (point foundation) method. In order to evaluate the performance according to the basic construction method, pull-out resistance, bearing capacity, and settlement amount were measured. At the same diameter, pull-out resistance increased with increasing penetration depth. Simplified comparison is difficult due to the difference in reinforcement method, diameter, and penetration depth, but it showed high bearing capacity in the order of crushed stone pile, PF method, and wood pile foundation. In the case of wood piles, the increase in uplift resistance was different depending on the slenderness ratio. Wood, crushed stone pile and PF construction methods, which are foundation reinforcement works with a bearing capacity of 105 kN/㎡ to 826 kN/㎡, are considered sufficient methods to be applied to the greenhouse foundation. There was a limitation in grasping the consistent trend of each foundation reinforcement method through existing studies. If these data are supplemented through additional empirical tests, it is judged that a basic design guideline that can satisfy the structure and economic efficiency of the greenhouse can be presented.

• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.333-341
• /
• 2012

Indium Tin Oxide (ITO) thin films were prepared by RF magnetron sputtering with different flow rates of $O_2$ gas from 0 to 12 sccm. Electrical and optical properties of these films were characterized and analyzed. ITO deposited on soda lime glass and RF power was 2 kW, frequency was 13.56 MHz, and working pressure was $1.0{\times}10^{-3}$ Torr, Ar gas was fixed at 1,000 sccm. The transmittance was measured at 300~1,100 nm ranges by using Photovoltaic analysis system. Electrical properties were measured by Hall measurement system. ITO thin films surface were measured by Scanning electron microscope. Atomic force microscope surface roughness scan for ITO thin films. ITO thin films secondary electron emission coefficient(${\gamma}$) was measured by ${\gamma}$-Focused ion beam. The resistivity is about $2.4{\times}10^{-4}{\Omega}{\cdot}cm$ and the weighted average transmittance is about 84.93% at 3 sccm oxygen flow rate. Also, we investigated Work-function of ITO thin films by using Auger neutralization mechanism according to secondary electron emission coefficient(${\gamma}$) values. We confirmed secondary electron emission peak at 3 sccm oxygen flow rate.

• Korean Journal of Ecology and Environment
• /
• v.48 no.4
• /
• pp.212-218
• /
• 2015

In South Korea, various nature-like fishways recently been installed for use by a wide variety of fish species. However, limited attempts have been made to monitor the fish utilization. The present study was conducted to ascertain the frequencies and patterns of utilization of the fishway installed at Beakjae Weir. We collected fish species that use the fishway by installing a fyke net at the exit of the fishway at least once a month from April 2013 to October 2013. Additionally, in order to identify all fish species that can potentially use the fishway, we investigated the fish fauna downstream to Beakjae Weir (mainstream of the Geum River). We found that 10 species belonging to 2 families used the fishway; this accounted for 64% of the total species inhabiting the mainstream. The species that used the fishway most frequently were Microphysogobio jeoni, followed by Squaliobarbus curriculus and Opsariichthys uncirostris amurensis. The highest number of fish using the fishway was observed in August, which was positively correlated with the water temperature (Spearman rank correlation, $r_s$=0.743, P=0.035). The sizes of the fish using the fishway varied widely, with the total body length ranging from 39 mm to 550 mm. Analysis of the time-dependent utilization frequency revealed that most fish used the fishway during the night (20:00~08:00). Compared to other fishways installed along the Geum River, the fishway installed at Beakjae Weir was used by fewer species and fish. This may be attributed to the structural inadequacy of the fishway, thereby resulting in a low attraction efficiency. Therefore, measures should be adopted to enhance the fishway attraction and passage efficiency. The results of this study can be used to ensure efficient operation and management of the Beakjae Weir fishway as well as serve as basic data for developing and building nature-like fishways tailored to Korean situations.

• Journal of Environmental Impact Assessment
• /
• v.26 no.6
• /
• pp.404-417
• /
• 2017

In this study, we analyzed response patterns of rotifer community to eutrophic state, and estimated the applicability of rotifer community as an environmental indicator for highly eutrophicated reservoirs. In order to evaluate the relationships among spatial and temporal distributions and the water quality of rotifer community, we selected the Jundae Reservoir and Chodae Reservoir in Chungcheongnam-do, Korea, which are geographically adjacent but have different water quality, particularly in their eutrophic states. For the analyses on their correlations, monthly survey of water quality and rotifer community, was conducted from April to November 2013 in both reservoirs. The rotifer community was divided into different compositions of functional groups as well as species. Functional groups were classified according to the structure and shape of trophi which can represent feeding behavior of rotifer genus. To reflect ecological characteristics of species, body size and habitat preferences were also considered. Species-based composition did not show a consistent tendency with water quality parameters related with eutrophication. On the contrary, functional group composition showed relatively clear group-specific patterns, increasing or decreasing according to the parameters. The results suggest the possible application of rotifer functional group composition as an indicatorforthe lentic systems, especially hyper-eutrophicated reservoirs. The present study can suggest the applicability based on the field observations from the limited time scale and sites, and further studies on feeding behavior of the rotifer functional group and its interactions with environmental variables are necessary for the further application.