• Journal of Korean Medical classics
• /
• v.19 no.4
• /
• pp.12-26
• /
• 2006

유하간(劉河間), 주단계적학설전파이후(朱丹溪的학說전播以后), 인위명대모사의가용약적시후편중고한(因위明代某些의家用葯的時候偏重苦寒), 소이도치료상비위이극벌진양적폐두(所以도致了상脾胃而克伐眞陽的弊두). 종이위료교정착오(종而위了교正착오), 형성료주장온보적온보학파(形成了主張溫보的溫보學派). 설기(설己), 손일규(孫一圭), 張景岳等溫보학파강조주재생명적비위(張景岳等溫보學派强凋主宰生命的脾胃), 신명양기(腎命陽氣), 재변증론치방면입족우선(在辨證論治方面立足于先), 후천(後天), 중시비여신(重視脾與腎), 선용료감온적약물(善用了甘溫的藥物). 저대우교정착오기착극대적작용(저대于교正錯오起着極大的作用), 동시논증(同時논증), 이론전개상비위여신명이주제공탁료(理론展개上脾胃여腎命以主제공托了), 우기후자가심료명문학설적연구(尤其后者加深了命門학설的硏究). 장경악활동적명대시이주자학위국책적(張景岳活동的明代是以朱子學위國策的), 구비사변성적철(具비思辨性的哲) 학배영상(학背영上), 추상(推想)"리(理)"이발휘의(而발휘의) 학이론(학理론). 우시저시기의가문입족우(于是저시期의家門立足于) "황제내경(黃帝內經)" 여연기론진행료기초이론화임상연구(여연氣論진行了基초理론和임床硏究), 경악통과편찬(景岳通과編찬) "내경(內經)"이저작(而著作)"류경(類經)"등(等), 근거자기적임상실험(根据自己的임床실험), 제출료온보학설(提出了溫보학설). 타쟁론적초점시자기제출적(他爭론的焦点是自己提出的)"음부족론(음不足론)". 침대전현적쟁론상(침대前현的爭론上), 경악이하간여범계위대상경(岳以河間여凡溪위대象). "경악전서(景岳全書)" 지운(之云): "양자유하간출(襄自劉河間出), 이서화입론(以署火立論), 전용한량벌차양기(專用寒凉伐此陽氣), 기해이심(其害已甚), 뢰동원선생비위지화필수온양(賴東垣先生脾胃之火必須溫養), 연상미능진척일편지류(然尙未能盡斥一偏之謬), 이단계복출(而丹溪復出), 우입음허화동지론(又立陰虛火動之論) ...... 한량지폐우복성행(寒凉之弊又復盛行), 부선수기해자기거이불반(夫先受其害者旣去而不返), 후습이용자유미이불오(後習而用者猶迷而不悟)", 지분료하간여단계시(指분了河間여丹溪是)"헌기지마(軒岐之魔)". 저사주장현출독특적유해저(些主장현出독特的유解), 이대후대학설발전적봉헌(以대后代학설발展的奉헌). 경악침대단계적"양상유여(景岳침대丹溪的)"양상유여(陽常有餘), 음상부족(陰常不足)", "기유여변시화(氣有餘便是火)", 설성(설成)"양비유여(陽非有餘), 진양부족(眞陽不足)", "기부족변시한(氣不足便是寒)", "상화부시사화(相火不是邪火)", 대단계학설견지료비판적입장(대丹溪학설堅持了批判的立장). 단계제출(丹溪提出)"양음설(養陰說)"이수립음허화왕적병기이론(而수立陰虛火旺的病機理론), 타적(他的)'양유여음부족론(陽有餘陰不足論)'상(上), '음(陰)'주요지생식물질(主要指生殖物질), "양(陽)"지정욕(指情欲). 가시중심사상시강조생리적양생(可是中心思想是强조生理的양생), 몰수립실제(沒수立실제)'음허화왕(陰虛火旺)'적병기(的病機). 취시장경악실재완성료저사병기(就是張景岳실在完成了저些病機). 경악재(景岳在) "진음론(眞陰論)" '장형질설성진양적상(將形질설成眞陽的象), 이명문위기(以命문위其)', 용(用)"개부족(皆不足)"해석질병(解석질病), 이익화(以益火) 장수이론위치법(장水理론위治法). 이차제조좌우귀환(而且制造左右歸丸) 음이귀납료치료방법(飮以귀納了治료方法), 발휘진음(발휘眞陰), 진양학설이구조유계통적이론(眞陽學說而구造有系統的理론). 저양위의가적쟁론핵심리유상화론(저兩位의家的爭론核心里有相火論), 논자상교연구타문적이론이보고기결과(논者相교硏究他문的理론而보告其結果).

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.86-86
• /
• 2017

마늘파종기는 파종기구동부와 파종후 파종홀의 복토역할을 하는 파종기롤러, 지면과의 마찰을 통해 바퀴의 회전토크가 발생하며 발생된 토크는 파종기 내부 동력으로 전달되어 전체 파종시스템(배종, 호퍼캠, 파종부)을 동작 시키는 기능을 수행하는 파종바퀴, 마늘종구를 한알씩 집어올려 중간이송컵으로 이송하는 자세교정컵이 포함된 배종부와 자세교정컵에서 낙하된 마늘종구를 땅속으로 파종하는 파종장치로 구성된다. 배종율 95%, 2립 배종률 5% 성능을 확보할 수 있는 기술이 개발될 경우 세계적으로도 독보적인 기술 우위를 확보할 수 있다. 이와 같은 기본적인 기능을 구현할 수 있는 컨셉모델에 대한 설계를 수행하여 시제품개발 전 기구해석과 구조해석 등을 위한 기본설계를 수행하였다. 배종율 95% 이상을 확보하기 위해서는 기존의 현장경험의 의한 설계 방식으로는 한계가 있기 때문에 시뮬레이션 및 분석 개발이 필요한데, 프레임은 고정밀 마늘종구 배종부 장착을 위한 기본 구조물로써 작동시 동력을 얻기 위한 바퀴와 연계가 되도록 설계되었으며, 호퍼는 배종 수행을 위해 마늘을 저장해 두는 통으로써 배종부와 연결된다. 배종부의 배종판이 회전함에 따라서 배종판의 홈이 호퍼 내로 들어갔다 나오면서 마늘을 집게되며, 동력 전달부는 배종판을 회전시켜주고, 회전 속도 조절을 가능하게 한다. 파종부는 배종부에서 중간컵을 통해 하나씩 공급해준 마늘을 땅에 심는 부분으로서. 프레임의 바퀴 회전과 연동되어 회전하고 설계하였다. 배종판에서 중간컵으로 이송된 마늘을 파종부의 파종컵에 받아 회전하면서 땅속에 파종컵이 묻히면 파종컵이 열리면서 땅속에 마늘을 심는 원리이다. 조간조정은 7조식의 경우 초기설치시 고정되도록 설계되었으며 농촌진흥청 기계화 표준재배안에 따라 의성마늘 기준 $14{\times}14cm$(조간${\times}$주간)를 기준으로 개발하였다. 조간조정은 기계가 설치되면 조정하기 어려우므로 14cm로 설계하였으며, 주간조정은 원형배종장치의 구동기어부의 속도비로 간격을 조정할 수 있도록 기어장치를 설계하였다. 주간조정은 13에서 18cm의 범위에서 작동하도록 설계되었으며, 필요에 따라 간격조절이 가능함. 마늘은 그 크기가 다르고, 형상도 다르기 때문에 종자에 따른 개별적인 파종기술들이 개발되어야하기 때문에 개발 기간이 오래 걸리고, 수익에 비하여 개발비가 과다하게 요구되는 실정인데 축적된 시뮬레이션 툴을 이용한 파종기 분석 기술을 확보할 경우 다른 파종기의 연구 개발에도 크게 도움이 될 것으로 기대되며, 생육측정 실험과 동역학 해석 툴 RecurDyn을 통해 파종기의 기구학적 분석을 통한 설계반영 인자를 도출할 계획이다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.4
• /
• pp.430-435
• /
• 2012

Low silage corn yield due to bad soil physical properties in the paddy field converted to upland condition is the chief obstacles to expanding the area for silage maize production. The effect of subsoiling (subsoiling to depth 40 cm) on soil physical properties and silage corn yield were investigated in the first year of paddy field converted to upland condition in 2010 and 2011, respectively. Soil compaction was loosened much particularly at depth 25~35cm as much as 1~1.5 MPa and soil bulk density and porosity at depth 15~30 cm are improved by subsoiling. Maize growth was increased by subsoiling, particularly in kernel number per ear which increased ear weight. Total digestible nutrients (TDN) yield of silage maize was increased as much as 19 and 39% in 2010 and 2011, respectively showing that yield increase according to subsoiling was higher when maize growth was prohibited much by excess-moisture injury due to heavy rain in 2011.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.221-228
• /
• 2001

This study was carried out to investigate the effect of germination condition and drying temperature on growth and physicochemical properties of brown rice. Three brown rice seeds of Ilpumbyeo, Dasanbyeo and Heugjinjubyeo were stored at room temperature for six weeks to test the time-sequence germination viability. Relatively stable germination ratio was maintained until 2 weeks after storage. However, 3 weeks after storage, germination ratio of brown rice seeds started to decrease rapidly and their germination ratio was lower than 80%. For this reason, brown rice was recommended for seeding within 2 weeks after hulling. During the initial 5 days, germination ratio of 24 hours pre-soaking brown rice was higher about 2-3% than that of non-soaking brown rice. The $25^{\circ}C$ was considered as the most favorable temperature for brown rice germination, because of the high germination ratio and desirable coleoptile growth of the brown rice, and little seed rotting symptoms. The scanning electron micrographs showed the structural differences between hot-air dried and freeze dried germinated-brown rice kernel. In the freeze dried germinated-brown rice, seed coat (pericarp, tegmen and aleurone layer) was mechanically disrupted from the endosperm, and many cleavages were observed among starch storing cells and starch granules. The endosperm of freeze-dried brown rice kernels formed the sponge-like structures and showed the fragile traits. For this reason, hot-air drying is considered as more suitable method than freeze drying for germinated-brown rice. The crude protein and amylose contents were slightly changed, but there were no significant differences during the germination period. Crude fiber content was decreased, but crude Int and total amino acid contents were increased as seeding days increased. A rapid increase in $\alpha$-amylase activities of germinating brown rice was observed at S days after seeding, and $\alpha$-amylase activities were decreased from 8 days after seeding. Total free sugar contents were decreased during the germination period. There was continuous decline in the contents of sucrose and glucose until 8 days after seeding, but fructose and maltose content were gradually increased from the 5 days after seeding.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.5
• /
• pp.272-279
• /
• 2002

A field experiment was conducted to investigate the effect of N-use efficiency and rice yield by rapeseed cake(organic fertilizer) application at panicle initiation stage in machine transplating cultivation from 1999 to 2000. The rice yield increased by 4% in "50% rapeseed cake application", by 2% in "30% rapeseed cake application" at panicle initiation stage, respectively. Amount of fertilizer N uptake was high according to increasing amount of rapeseed cake application at panicle initiation stage compared with conventional treatment, but percentage recovery of fertilizer N was higher in 30% rapeseed cake application than in 50% rapeseed cake application at panicle initiation stage. Thus, this result was thought that there was more adventageous in 30% rapeseed cake application than 50% rapeseed cake application at panicle initiation stage in the fertilizer reduction or N-use efficiency respects in rice paddy.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.2
• /
• pp.79-87
• /
• 2016

Asian dust (Hwangsa) interacts with light, atmospheric gas, aerosol, and marine ecosystem, affecting Earth climate. Mineralogical properties are essential to understand the interaction between the dust and environments. In this study, we examined the mineralogical properties of Asian dust collected at Deokjeok Island, Incheon, Korea in February 22, 2015. X-ray diffraction (XRD) analyses showed that phyllosilicate minerals (62 wt%) dominate the Asian dust. Illite-smectite series clay minerals (55%) were common with minor chlorite (5%) and kaolinite (2%). Non-phyllosilicate minerals were quartz (18%), plagioclase (10%), K-feldspar (4%), calcite (4%), and gypsum (1%). Similar results were obtained by mineral quantification using scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). Transmission electron microscopy combined with EDS confirmed illite-smectite series clay minerals as the dominant phyllosilicate type. Morphological analyses using SEM showed clay agglomerates, clay-coated quartz, feldspars, and micas. Gypsum grains were common on the particle surface, while calcite nanofibers, previously reported as common on the surface, were rare, indicating the reaction of calcite and acidic atmospheric pollutants to form gypsum. The analytical result of 2015 Asian dust would contribute to the establishment of mineralogical base for the modeling of the interaction between Asian dust and environments.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.4
• /
• pp.202-207
• /
• 2009

Nanocomposite formation of metal-metal oxide systems by mechanical alloying (MA) has been investigated at room temperature. The systems we chose are the $Fe_3O_4$-M (M = AI, Ti), where pure metals are used as reducing agent. It is found that $Fe/Al_2O_3$ and $Fe/TiO_2$ nanocomposite powders in which $Al_2O_3$ and $TiO_2$ are dispersed in ${\alpha}$-Fe matrix with nano-sized grains are obtained by MA of $Fe_3O_4$ with Al and Ti for 25 and 75 hours, respectively. It is suggested that the shorter MA time for the nanocomposite formation in $Fe/Al_2O_3$ is due to a large negative heat associated with the chemical reduction of magnetite by aluminum. X-ray diffraction results show that the average grain size of ${\alpha}$-Fe in $Fe/TiO_2$ nanocomposite powders is in the range of 30 nm. The change in magnetic properties also reflects the details of the solid-state reduction of magnetite by pure metals during MA.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.5
• /
• pp.442-448
• /
• 1993

The aims of the work were to examme the variability induced by EMS (ethyl methanesulfonate) mutagenesis of soybean plants, and to isolate mutants altered in nodulation and other growth characters. Seeds of two soybean cultivars, ‘Hwanggeumkong’ and ‘Baegunkong’ were treated with 30 and 50mM EMS(pH 7.0) for 6 hours and were planted directly in the field. Field emergency of$M_1 seed was averaged to be 61.0%, and frequency of plants with chlorophyll-deficient sectors of the first trifoliolate is about 0.7%. Regardless of varieties and does of EMS, $M_1 plant injury at harvest was present in plant height, pod and seed number per plant when compared to those of original-type soybean plants. The $M_2 variability of nodulation process induced by EMS treatment was found to be narrower than that of shoot dry weight. On the basis of the occurrence of chlorophyll-deficient plants, mutated cell frequency within $M_1 seed ranged from 5.3% to 84.2%, suggesting that mutation frequency on the $M_1 seed induced by EMS occurred partly and randomly regardless of varieties and doses of EMS. The putative mutant, which had more nodulation than original-type plant, was short in plant height. Sparse-nodulating soybean mutant was lower in leaf chlorophyll content and showed reduced growth.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.3
• /
• pp.245-251
• /
• 2000

Dielectric properties, piezoelectric properties and mechanical properties of NiO-doped Pb($(Ni_{1/3}Nb_{2/3})O_3-PbTiO_3-PbZrO_3$ ceramics were investigated. Powders, prepared by columbite precursor method, were cold pressed and sintered at temperature ranging from $1100^{\circ}C$ to $1250^{\circ}C$. Dielectric constant and piezoelectric constant increased with amount of NiO up to 1 mol% and then decreased with further addition of NiO. It seems that NiO acts as a sintering aid at the sintering temperatures of $1150^{\circ}C$. When the samples were sintered at temperature above $1200^{\circ}C$, however, both dielectric constant and electromechanical coupling factor decreased and mechanical quality coefficient increased with addition of NiO. Hardness and fracture toughness of PNN-PT-PZ increased with addition of NiO up to 1 mol%, and then decreased slightly with further addition of NiO. These results showed that dielectric properties, piezoelectric properties and mechanical properties of PNN-PT-PZ system seemed to be closely related with microstructural factors such as grain size, bulk density and the amount of second phase.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.4
• /
• pp.308-313
• /
• 1999

Direct seeding is a cultivation method of Korean ginseng which can cut down production cost and increase productivity. This study was conducted to obtain detailed information about this method and to aid the development of it in Korea. Major pre-crops before ginseng cultivation were rice, corn and rye, and organic matters, such as rice straw, rye straw and poultry feces were used for basal fertilization. In direct seeding of the ginseng field, seeding density was 196 to 210 seeds per $3.3m^2$ and germination ratio was 67%. Survival ratio of 4-year-old ginsengs which were products of direct seeding was 51%, and more than 100 plants per $3.3m^2$ survived. The most critical diseases in the directly seeded ginseng field were grey mold, damping off, and stem diseases including stem spot disease. Plant growth of the ginseng cultivated by the direct seeding method was not different from the ginseng cultivated by transplanting method. But the root of the ginseng cultivated by the direct seeding method took the shape of a shorter main root compared to the ginseng cultivated by the transplanting method. Root yield per $3.3m^2$ of the direct seeding ginseng field was larger compared to the field of the transplanting cultivation.