References
- R. Schwarz and C.C. Koch, "Formation of amorphous alloys by the mechanical alloying of crystalline powders of pure metals and powders of intermetallics", Appl. Phys. Lett. 49 (1986) 146 https://doi.org/10.1063/1.97206
-
C.C. Koch, O.B. Cavin, C.G. Mckamey and J.O. Scarbrough, "Preparation of amorphous
$Ni_{60}Nb_{40}$ by mechanical alloying", Appl. Phys. Lett. 43 (1983) 1017 https://doi.org/10.1063/1.94213 - U. Mizutani and C.H. Lee, "Effect of mechanical alloying beyond the completion of glass formation for Ni-Zr alloy powders", J. Mat. Sci. 25 (1990) 399 https://doi.org/10.1007/BF00714046
-
C.H. Lee, "Formation of nanocrystalline
$MoSi_2$ compound subjected to mechanical alloying", J. Ceramic Processing Research 9 (2008) 321 - J. Eckert and L. Schultz, "Glass formation and extended solubilities in mechanically alloyed cobalt-transition metal alloys", J. Less-Common Metals 166 (1990) 293 https://doi.org/10.1016/0022-5088(90)90011-8
- K. Suzuki, Y. Homma, K. Suzuki and M. Misawa, "Structural characterization of Ni-V amorphous alloys prepared by mechanical alloying", Mat. Sci. Eng. A134 (1991) 987 https://doi.org/10.1016/0921-5093(91)90907-5
- R.B. Schwarz and W.L. Johnson, "Formation of an amorphous alloy by solid state reaction of the pure polycrystalline metals", Phys. Rev. Letters 51 (1983) 415 https://doi.org/10.1103/PhysRevLett.51.415
-
C.H. Lee, S.H. Lee, S.Y. Chun and S.J. Lee, "Fabrication of
$Mg_2Si$ thermoelectric materials by mechanical alloying and spark-plasma sintering process", J. of Nanosci. Nanotechnol. 6 (2006) 3429 https://doi.org/10.1166/jnn.2006.027 - T. Fukunaga, N. Kuroda, C.H. Lee, T. Koyano and U. Mizutani, "Nitrogen induced amorphization observed by X-ray and neutron diffractions in the immiscible V-Cu system", J. Non-Cryst. Solids 176 (1994) 98 https://doi.org/10.1016/0022-3093(94)90217-8
- H.J. Fecht, E. Hellstern, Z. Fu and W.L. Johnson, "Nanocrystalline metals prepared by high-energy ball milling", Metal. Trans. 21 (1990) 2333 https://doi.org/10.1007/BF02646980
-
G.H. Li and Q.P. Kong, "Processing and thermal stability of
$nano-Mg_2Si$ intermetallic compound", Scripta Metallurgica et Materialia 32 (1995) 1435 https://doi.org/10.1016/0956-716X(95)00184-W -
T. Ban, K. Okada, T. Hayashi and N. Otsuka, "Mechanochemical effects for some
$Al_2O_3$ powders of dry grinding", J. Mat. Sci. 27 (1992) 465 https://doi.org/10.1007/BF00543939 - J. Liao and M. Senna, "Formation and properties of amorphous magnesium silicates", Mat. Sci. Forum 88 (1992) 753 https://doi.org/10.4028/www.scientific.net/MSF.88-90.753
- K. Tokumitsu, "Mechanochemical reaction between metals and hydrocarbons", Mat. Sci. Forum 88 (1992) 715 https://doi.org/10.4028/www.scientific.net/MSF.88-90.715
- H. Izumi, K. Izumi and K. Kudaka, "Mechanochemical reduction reaction of titanium oxides by calcium", J. Jpn. Soc. Powder and Powder Metallurgy 48 (2001) 1051 https://doi.org/10.2497/jjspm.48.1051
-
C.H. Lee, S.H. Lee, S.Y. Chun, S.J. Lee and Y.S. Kwon, "Nanocomposite formation in the
$Fe_2O_3-M$ (M = Al, Ti, Zn, Cu) system by mechanical alloying", Mat. Sci. Forum 449 (2004) 253 https://doi.org/10.4028/www.scientific.net/MSF.449-452.253 - O. Kubaschewski and C.B. Alcock, Metallurgical Thermochemistry, Pergamon International Library (1983) 268
- W.H. Hall, "Characterization of crystal size and strain by X-ray diffraction", J. Inst. Met. 75 (1948) 1127
- C.H. Lee, S.H. Lee, S.Y. Chun, S.J. Lee and J.S. Kim, "Mechanical alloying effect of hematite and graphite", Mat. Sci. Forum 449 (2004) 257 https://doi.org/10.4028/www.scientific.net/MSF.449-452.257
- K. Schnitzke, L. Schultz, J. Wecker and M. Katter, "High coercivity in Sm2Fe17Nx magnets", Appl. Phys. Lett. 57 (1990) 2853 https://doi.org/10.1063/1.104202
- X.C. Kou, W.J. Qiang, H. Kronmuller and L. Shultz, "Coercivity of Sm-Fe-N ferromagnets produced by the mechanical alloying technique", J. Appl. Phys. 74 (1993) 6791 https://doi.org/10.1063/1.355079