• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.4
• /
• pp.439-444
• /
• 2011

Purpose: To represent the shape of toric corea in the elliptical function for the determination of curvature distribution and lacrimal thickness between cornea and contact lens when the lens is fitted. Methods: Topography measurements of corneal curvature and curvature equation derived from the assumed elliptical function were evaluated using the Excel program which included the necessary equation derived. Results: Mathematical expressions for the cornea whose ribbon shaped-topography image, in which the center does not coincide with the corneal apex, can be determined. Conclusions: For the application where the higher accuracy on the cornea is not required, such as higher order aberration, the cornea cal be expressed in the simple elliptical function.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.338-341
• /
• 2011

Thin silicon ribbon was used for fabricating flexible silicon p-i-n junction devices, consisting of 100${\times}$100 arrays of pixels in 1 inch on the diagonal. Those passive matrix devices exhibited the rectification ratio $>10^{4}$ owing to smaller cross-talking current than that of p-n junction devices. P-i-n devices fabricated on silica/silicon substrates are easily detached by treatment with hydrofluoric acid and are subsequently transferred onto both PDMS and flexible PET film.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.2
• /
• pp.39-45
• /
• 2002

The effect of reefing-line length and reefing methods on drag and inflated shape of the conical ribbon parachute were experimentally investigated. Tests were performed to determine reefing-line length of the parachute models, demonstrate aerodynamic adequacy of the reefing method, and confirmed that performance met the design requirement. The reefing ratio, drag-area ratio, was decreased in relation to the decrease in the length of the reefing-line and the stability of the parachute models was increased with reefing. The test results were compared with the avilable similar data. Fair to good agreement was obtained.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.3
• /
• pp.236-243
• /
• 1995

Since amorphous alloys have been known to have better mechanical and chemical properties than crystalline alloys of the same composition, a great number of studies on the formation of Al-based amorphous alloys have been carried out actively. However, little has been obtained about the effect of Rare-Earth metal and Transition metal addition on amorphous phase formed by melt spinning method. This study included fabrication of amorphous alloy $Al_{85}Ce_5Ni_{10}$ by melt spinning methods and DTA, XRD, TEM analysis to determine crystalization behavoir. Annealing treatments were carried out in Ar atmosphere under isothermal and nonisothermal conditions. The diffraction pattern of non-heated ribbons showed broad form characteristic of glass metallic alloy. The crystallization of amorphous $Al_{85}Ce_5Ni_{10}$ takes place eutedtoidly by homogeneous formation of Al and MS-1, followed by precipitation of the $Al_{11}Ce_3$ and later $MS-1{\rightarrow}Al_3Ni$ transformation.

• Journal of Institute of Convergence Technology
• /
• v.3 no.1
• /
• pp.51-54
• /
• 2013

Cadmium telluride(CdTe) nanowires were successfully synthesized from individual nanoparticles via self-assembly and the evolutionary process was investigated. The oxidation of tellurium ions on CdTe nanoparticles resulted in the organization of individual nanoparticle into twisted-nanoribbons. The nanoparticles self-assembled to twisted ribbons under light while nanoparticles under dark transformed to straight nanowires made of several layers of individual nanoparticles. The images of nanoribbons were analysed based on transmission electron microscopy and scanning electron microscopy. The photoluminescence was blue-shifted from 555 to 545nm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.317-321
• /
• 2003

A conventional typewriter types letters by hammering a carbon ribbon which is attached at a paper. The laser typing process which write a micro pattern of Chrome on a silicon wafer has been developed. A glass that is coated with 100 nm Chrome (Carbon ribbon) is attached on a silicon wafer (paper). An Nd-Yag laser (hammer) is irradiated on the glass, and the Chrome is transferred on the silicon wafer. Micro patterns are made by controlling laser beam trajectory. The suggested micro pattering can be used at the high density data storage of TeraBit/in$^2$ or at the improvement of productivity of semiconductor manufacturing procedure.

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.31-36
• /
• 2010

The objective of this study is to evaluate effects of honeycomb cell size for compressive behaviors of square sandwich composite tubes with woven fabric carbon/epoxy skin and Al honeycomb core. In order to achieve these goals, four different kinds of tubes were fabricated and compressed to 200mm~250mm under quasi-static load of 10mm/min. The Al honeycombs with cell size of 6.35mm and 9.53mm were used. The relationship of mean compressive load and cell size was evaluated. In addition, the effect of peel strength and equivalent elastic modulus in ribbon direction for the mean compressive load was investigated.

• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.55-59
• /
• 1991

The temperature-dependent magnetization curves of amorphous Fe-Co-(Nd, Sm, Gd, Tb)-B alloys were measured using a vibrating sample magnetometer from 77 K up to 900 K. The spin wave stiffness constants and the range of the exchange interaction were calculated from the saturation magnetization values at 0 K. Curie temperatures and the Bloch coefficients estimated from the saturation magnetization curves. The low temperature dependence of magnetization is in good agreement with Bloch relation, $M_{s}(T)=M_{s}(O)(1-BT^{3/2}-CT^{5/2})$. The spin wave stiffness constant and the range of exchange interaction are decreased by substitution of heavy rare earth (Tb, Gd).

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.150-153
• /
• 1994

Magnetic field annealing method has been used to obtain proper hysteresis loop shapes which are useful to a device using amorphous ribbon. In this study, two pairs of Helmhotz coils were used to apply longitudinal and transverse magnetic field during annealing. For the measurement of coercive field strength noise which depends on magnetic field annealing, Co-based amorphous alloy ribbon $VITROVAC^{\circledR}$ 6030 was used. For the sample which was annealed under dc transverse and dc longitudinal magnetic field, coercive field strength noise was nearly independent of magnetizing frequency ranging from 1 to 100 kHz, but dc transverse and ac longitudinal magnetic fields annealed samples show that the coercive field strength noise decreased in power of magnetizing frequency. When magnetic domain nucleation occurred, the coercive field strength noise increased remarkably and decreased in power of magnetizing frequency.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.179-183
• /
• 1994

A high efficiency small electromagnet (22 mm air gap and $40{\times}25mm^{2}$ core's cross section) suitable for measuring magnetostriction and magnetic anisotropy was biult. The magnet could be minaturized by reducing the measuring space and time. The excitation current of the electromagnet was supplied for only a few second of measuring time. Cooling system of the electromagnet could be eliminated since the dissipation energy was very small. An 0.5 T magnetic field was generated with 180 W power consumption. The values of magnetostriction and magnetic anisotropy were measured with a very sensitive capacitance cell with resolution of $10^{-8}$ and 1 nJ. The torque was calibrated using a soft magnetic ribbon's shape anisotropy.