• Journal of the Korean Solar Energy Society
• /
• v.38 no.1
• /
• pp.45-55
• /
• 2018

Environmentally benign lead-free solder coated ribbon (e. g. SnCu, SnZn, SnBi${\cdots}$) has been intensively studied to interconnect cells without lead mixed ribbon (e. g. SnPb) in the crystalline silicon(c-Si) photovoltaic modules. However, high melting point (> $200^{\circ}C$) of non-lead based solder provokes increased thermo-mechanical stress during its soldering process, which causes early degradation of PV module with it. Hence, we proposed low-temperature conductive paste (CP) based tabbing method for lead-free ribbon. Modules, interconnected by the lead-free solder (SnCu) employing CP approach, exhibits similar output without increased resistivity losses at initial condition, in comparison with traditional high temperature soldering method. Moreover, 400 cycles (2,000 hour) of thermal cycle test reveals that the module integrated by CP approach withstands thermo-mechanical stress. Furthermore, this approach guarantees strong mechanical adhesion (peel strength of ~ 2 N) between cell and lead-free ribbons. Therefore, the CP based tabbing process for lead free ribbons enables to interconnect cells in c-Si PV module, without deteriorating its performance.

• Journal of the Korean Magnetics Society
• /
• v.17 no.5
• /
• pp.198-204
• /
• 2007

The effects of annealing temperature on electromagnetic wave absorption characteristics in $Fe_{73.5}Cu_1Nb_3Si_{15.5}B_7$ (at%) alloy flakes/polymer composite sheets available for quasi-microwave band have been investigated. The composite sheet including the magnetic flakes annealed at $425{\sim}475^{\circ}C$ for 1 h exhibited highest power loss in the GHz frequency range as compared with the sheets composed of the alloy flakes annealed at higher temperature than $475^{\circ}C$ or in as-milled state. Moreover the imaginary part of complex permeability had largest value in the GHz frequency range for the sheets including the flakes annealed at $425{\sim}475^{\circ}C$. The large value of power loss of the sheets including the magnetic flakes annealed at $425{\sim}475^{\circ}C$ was attributed to the high imaginary part of the complex permeability. However, because of its large transmission parameter $S_{21}$, the composite sheet having the magnetic flakes annealed at $525^{\circ}C$ showed low power loss.

• 보존과학연구
• /
• s.32
• /
• pp.75-87
• /
• 2011

The materials analysis is important in conservation science for cultural assets since conservators can make appropriate decision of treatment and environment through understanding manufacturing, period and materials. Palsapumdo is the painting of Palsapum which was given by Yi Sun-shin from the emperor Shinjong in The Ming Dynasty. Palsapumdo painted with various pigments on the fabric has remained to adhere a sheet of lining paper. In this study, we carried out the fiber identification about the fabric and lining paper and the analysis of the pigments. This study identified a fabric and a lining paper and analised pigments for the painting. As a result of fabric analysis, it was confirmed as cotton because ribbon twists and shape of kidney bean in a cross section. After the analysis of lining paper, color changed to yellow by Graff "C" staining tests, and had short fiber and tracheid. Therefore, it is supposed to be a paper which is made of conifer pulp. In addition, the results of SEM-EDS, the pigments are indicated as Orpiment($As_2S_3$), Minium($Pb_3O_4$), Hematite($Fe_2O_3$), Emeraldgreen ($C_2H_3As_3Cu_2O_8$), Ultramarine [$2(Na_2O{\cdot}Al_2O_3{\cdot}2SiO_2){\cdot}Na_2S_2$], talc[$Mg_3Si_4O_{10}(OH)_2$], bariumsulfate($BaSO_4$) and brass.

• Korean Journal of Dental Materials
• /
• v.44 no.3
• /
• pp.263-272
• /
• 2017

In this study, antibacterial chlorhexidine (CHX)-containing hydroxyapatite (HAp) was coated on titanium and investigated its characteristics. Ti-mSBF-CHX group was prepared by soaking titanium disks in the modified simulated body fluid (mSBF) mixed with CHX. Ti-mSBF group was coated using mSBF without CHX. Ti-mSBF-adCHX group was prepared by soaking Ti-mSBF specimen in CHX-containing solution. The crystallines clusters composed with nano-shaped crystallites were coated on the surface of the Ti-mSBF specimen. The ribbon-shaped crystallites were observed with the crystalline clusters on the Ti-mSBF-CHX specimen. The content of CHX chemical compositions was high in ribbon-shaped crystallites. HAp crystalline structure was dominant for all prepared specimens, and ${\beta}-TCP$ (tricalcium phosphate) and OCP (octacalcium phosphate) crystalline structures were observed in the Ti-mSBF-CHX specimen. FT-IR spectra showed the strong peaks of CHX in Ti-mSBF-adCHX and Ti-mSBF-CHX groups. However, after immersing in a phosphate buffered saline (PBS), CHX was rapidly released in Ti-mSBF-adCHX group, while it was slowly released in Ti-mSBF-CHX. We expect that the coating method of Ti-mSBF-CHX group could be used for protecting inflammation of titanium implant by incorporating antibacterial agent CHX into HAp layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.85-85
• /
• 2015

현재 태양광에너지 시장은 해마다 빠른 속도로 성장하는 추세이며 50 GWp/년 이상의 시장으로 변화하였고 앞으로도 전체적인 성장세는 지속 유지될 것으로 판단된다. 하지만 이와 아울러 각 Value chain 별로 많은 기업들이 생겨나게되어 각각의 기업들이 제품을 고효율 저가화 함으로서 경쟁력을 확보하기 위해 많은 노력들이 기울이고 있으며 본 강연에서는 이러한 측면에서 태양광 에너지의 분야별 고효율/저가화를 위한 기술동향을 살펴보고자 한다. 태양광 산업은 아직은 다소 높은 발전단가로 인해 일부 정부의 지원이나 정책에 의해 산업의 규모가 결정되게 되는데 주요한 지원제도는 RPS 제도와 FIT 제도가 있으며 우리나라는 초기 FIT 제도로 국가에서 태양광에서 생산된 전기를 높은 가격에 사주었으나 근래에들어 RPS 제도를 운영하게 되었으며 매전을 하면서 SMP에 준하는 수익을 창출하고 이와 아울러 REC 를 확보하여 확보된 REC 단가에 의해 추가적인 수익을 창출하는 구조의 발전사업이 진행되고 있다. 그리고 RPS나 FIT와 같은 정부의 지원없이도 발전단가의 경쟁력을 확보하는 시점을 그리드패러티라고 하며 이는 매우 중요한 의미를 갖는다. 태양광의 저가화는 그리드패러티 달성을 확보하기 위해 필수적으로 필요한 사안이며 앞으로도 이러한 저가화 / 고효율화 기술노력은 계속 진행될 것으로 판단된다. 우선 소재의 가격을 줄이기 위해 웨이퍼의 두께가 점점 박형화 되어가고 박형화 되면서도 안정적인 공정수율 및 효율을 향상시키기 위한 기술개발이 진행되고 있으며 Cell 분야에 있어서도 고효율을 위한 다양한 Texturing 기술 및 패시베이션 기술의 개발이 이루어 지고 있으며 고효율 컨셉의 MRT cell, Back contact cell 등 고효율 구조의 cell의 양산을 진행하고 있는 등 최근 n-type 기반의 고효율 cell 기술이 활발하게 양산화 검토가 이루어 지고 있다. 모듈 분야에 있어서는 저가/고효율화와 아울러 제품의 신뢰성 확보가 무엇보다도 중요하게 다루어 지고 있으며 이는 모듈이 최소 25년 이상 Field 에서 운용되어 수익창출이 가능해야 하므로 가장 중요한 요소중에 하나라고 할 수 있다. 신뢰성 측면에서 중요하게 다루어 지고 있는 것 중 하나가 PID 저감을 위한 노력이며 이와 관련된 각 소재의 개발이 가장 활발하게 진행되고 있으며 이와 아울러 장수명을 보장하기 위한 내구성이 겸비된 봉지재의 개발 또한 많은 관심을 불러 일으키고 있다. 저가/고효율화를 위해 CTM loss를 줄이기 위한 다양한 시도가 이루어지고 있으며 특수 형태의 리본으로 빛의 흡수를 증가시키거나 컨택저항을 최소화 하기위한 소재의 개발이 이루어 지고 있다. 태양광 시스템 분야의 경우 발전량과 수익창출에 있어 직접적인 영향을 미치는 분야로서 전체 시스템의 loss 를 줄이고 최적의 환경에서 최대한의 발전량을 확보하기 위한 array 설계 및 운용기술이 활발하게 개발되고 있으며 시스템에서의 loss를 줄여줄수 있는 마이크로 인버터나 multi string 인버터의 적용도 이루어 지고 있으나 저가화를 위한 추가적인 노력이 필요한 상황이다. 본 강연의 마지막으로 이러한 노력들의 산물인 특수 태양광 제품 및 시스템의 기술동향에 대해 살펴하고자 한다. 사막은 전체면적의 1/3을 차지할 정도로 넓은 면적을 자랑하지만 밤과 낮의 기온차 그리고 계통 선로의 부재 등 적용하기 어려운 환경적인 제약도 함께 존재하며 이러한 문제를 해결하기 위한 방안에 대해 살펴보고 최근 Hot issue 중의 하나인 수상 태양광 시스템의 장, 단점과 기술적 특성 등을 살펴보고자 한다.

• Journal of the Korean Magnetics Society
• /
• v.3 no.3
• /
• pp.201-207
• /
• 1993

Starting ingot of $Pr_{15}Fe_{77}B_{8}$ were prepared by vacuum induction melting under argon atmosphere. The ingot were induction melted in a quartz crucible and then ejected as a molten alloy throuth a 0.6 mrn orifice onto a rotating cop¬per wheel. An anisotropic magnet was prepared from ribbon by hot deformation techniques. A fully dense precursor magnet first made by pressing ribbons at $680^{\circ}C$ under a pressure of $21.8\;kg/mm^{2}$. A substantially oriented magnets were obtained by die-upset under various conditions. As the compression ratio increases, the $B_{r}$ value increases pronouncedly though $_{i}H_{c}$ decreases. Also, XRD analyses show increased diffraction peak from (006). From these results, it can be known that the magnetic easy axis was formed along the compression axis. As the die-upset speed increases, $_{i}H_{c}$ increases though $B_{r}$ decreases. The $B_{r}$ increases up to $750^{\circ}C$ of die-upset temperature and above this temperature decreases. The value of $4{\pi}M_{s}$ of the $Pr_{15}Fe_{77}B_{8}$ alloy prepared is found to be 11.8 KG. When the alloy was compressed by 0.8 under the die-upset speed of 0.05 m/sec at $750^{\circ}C$, $B_{r}$ was 11.0 KG indicating that the alloy has excellent magnetic anistropy. However, this alloy has some limitation because of low $_{i}H_{c}$.

• Korean Journal of Materials Research
• /
• v.7 no.12
• /
• pp.1063-1069
• /
• 1997

For me1t-spun Fe-Nd-C alloys, variation of phase development and magnetic properties with the variety of alloy compositions and production conditions were investigated. To find out whether hard magnetic $Fe_{14}Nd_2C$ is crystallized direct1y from the melt by rapid quenching, the phase development of the as-spun ribbons spun at various speed was a1so studied. For the ribbons spun at 10m/s, ${\alpha}-Fe$ was the primary crystallization phase followed by the secondary $Fe_{17}Nd_2C$. At 20m/s ${\alpha}-Fe$ was suppressed so that the primary $Fe_{17}Nd_2C$ coexisted with the secondary ${\alpha}-Fe$ and the amorphous phase. Above 30m/s the ribbons were a1most amorphous, and the amorphization was complete at 40m/s. $Fe_{14}Nd_2C$ therefore was not found in as-spun state but obtained after heat treating the ribbons. The effective temperature range ($700{\sim}900^{\circ}C$) in which $Fe_{14}Nd_2C$ can be obtained was wider than that of a cast alloy. An alloy made with the wheel speed of 20 or 30m/s yielded higher coercivities after heat treatment. In iron-rich Fe-Nd-C, the composition range in which a high coercivity (more than 10kOe) is expected is narrow, i.e., 77~78 Fe and 7~8 C(at.%).

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.864-873
• /
• 1995

Amorphous $Fe_{73.5}Cu_{1}Nb_{3}Si_{16.5}B_{6}$ ribbons were annealed for different time at $500^{\circ}C$ and $552^{\circ}C$, just before and after the exothermic reaction in DSC curve. The development of nanocrystalline phase was investigated by means of $M\"{o}ssbsuer$ spectroscopy. The crystalline phase consists mainly of $DO_{3}Fe-Si$. Though slight in amount (5%), another ferromagnetic phase which could be presumed $t-Fe_{3}B$ was detected Si content of $DO_{3}Fe-Si$, Si/(Fe+Si), was 0.218 under the heat treatment at $500^{\circ}C$ for 60 min and 0.222 at $552^{\circ}C$ for 10 min. Since then both of those values decreased with time until 120 min and finally these two values remained constant at 0.210. The variation in Si content with annealing time results in the variation in the hyperfine field and the isomer shift. The increase in the mean hyperfine fields and the decrease in the mean isomer shifts of Fe-Si are caused by the increase in Si content. The volume fractions of residual amorphous phase rapidly decrease during the early stage of annealing and come nearer to saturation after 120 min both at $500^{\circ}C$ and $552^{\circ}C$. The decrease in the mean hyperfine field of residual amorphous. in spite of slight changes in the volume fractions of Fe-Si and of residual amorphous after 120 min. is caused by the increase in the content of Nb and B in residual amorphous phase. The saturated volume fraction of the crystalline phase was 81% for $500^{\circ}C$ (180 min) and 77% for $552^{\circ}C$ (960 min), different from expectation.