• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.1-9
• /
• 2020

In this study, a seismic reinforcement system was developed considering the rocking behavior of walls. The rocking behavior is to rotate left and right around the vertical axis of the wall, and the development system is a method of dissipating energy by installing a damper to a large displacement part. Developed steel rod damper was used, and steel rod diameter and length(aspect ratio) were selected as variables. As a result of the experiment, it was evaluated to have excellent seismic performance when the damper length was 260mm.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.45-52
• /
• 2019

In this study, the seismic strengthening technique considering the rocking behavior of the wall was developed. The rocking system rotates left and right around the vertical axis of the wall. The development system is a method of dissipating energy by installing a damper which was attached at a large displacement portion. The damper was made of a steel material, and the shape and height of the strut were selected as variables. Experimental results showed that in case of shorter strut make strength capacity increasement and in case of longer strut make deformation capacity increasement. As a result of comparing the abilities according to I and S type strut shapes, it was evaluated that S type has better seismic performance.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.141-148
• /
• 2021

In this study, the technology to prevent lateral deformation of steel dampers was reviewed and applied to the clamp type dampers. As for the experimental method, the rocking behavior was applied as in the previous study. The evaluation variables are the existing research results (SV-260) without lateral deformation prevention details and the test results (V-1, V-1R) with lateral deformation prevention details. Where, V-1 is the lateral deformation prevention detail at the lower part of the damper, and V-1R is the lateral deformation prevention detail at the lower part and upper part of the damper. As a result of evaluating the moment, drift ratio, and energy dissipation capacity relative to SV-260 at the time of maximum load, the maximum moments of V-1 and V-1R were increased by 1.22 times and 1.36 times compared to SV-260, and the maximum drift ratio increased by 2.41 times and 2.92 times. In addition, the energy dissipation capacity also increased by 1.39 times and 1.52 times, respectively. Therefore, the application of lateral deformation prevention details to the steel damper was evaluated as appropriate.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.66-73
• /
• 2022

In this study, the experimental results of 7 dampers with the same strut height and similar cross-sectional area were compared based on the existing research results on steel dampers with rocking behavior. As steel plate dampers, SI-260, SV-260, SS-260 without Lateral deformation prevention detail(Ldpd), I-1, V-1, S-1 with Ldpd, and R20-260 with steel rod damper were evaluated. In addition, R15-260, which has a cross-sectional area of 0.56 times than other dampers, was also reviewed to appropriately evaluate the behavior of the steel rod damper. An important study result is the application superiority of the steel rod damper, which improved the unidirectional behavior of the steel plate dampers. This was proved in the moment-resistance capacity and displacement ratio evaluation. As a result of the evaluation, the R20-260, a steel bar damper, was evaluated as having the best performance. In addition, it is judged to have sufficient seismic resistance as it shows deformability up to a displacement ratio of 2.0.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.4
• /
• pp.93-104
• /
• 2000

적충되어 있는 다중 블록 시스템은 역사적 건물이나 문화재등에 자주 사용되고 있다. 이러한 구조시스템은 지진에 매우 취약하고, 특히 세장한 구조물인 경우에는 낮은 수준의 지반가속도에 대해서도 전도가 일어날 수 있다. 지진으로부터 이러한 구조물을 보호할 수 있는 방법중의 하나로써 지진격기받침의 사용을 들 수 있으나, 아직 격리받침이 설치되어 있는 다중블록의 거동에 대해서는 잘 알려지지 않는 실정이다. 이 논문에서는 각각 P-F 시스템, FPS, LRB 시스템이 설치되어 있을때의 세장한 강체 블록의 동적거동에 대해 살펴보았다. P-F 시스템과 FPS에서의 마찰모델은 Coulomb의 마찰법칙을 이용하였도, 상부구조물은 붙음(stick)모드와 록킹(rocking) 모드만이 존재하도록 가정하였다. 충격은 개별요소법(distinct element method, DEM)을 이용해 기술하였고, 조화입력운동에 대한 응답을 조사하였다.

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.2
• /
• pp.27-34
• /
• 2019

This study proposes a technique to dissipate the energy of a rocking wall installed on a frame by using a metallic damper. The rocking behavior is to turn left and right about the wall vertical axis. The development system is a method of dissipating energy by installing a damper which is the like on a large displacement portion. Experimental results showed that in case of shorter strut make strength capacity increasement and in case of longer strut make deformation capacity increasement. The higher the strut height, the better the energy dissipation capacity. The proposed equation for estimating the steel damper strength applied to this study is a straight type strut damper. However, it is not suitable for calculation of the strength of clamped type strut damper where both flexural behavior and shear behavior are mixed.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.4
• /
• pp.45-52
• /
• 2020

In this study, performance experiments were performed on the shape of steel dampers that affect the rocking behavior. Three types of strut shapes of SI type, SV type and SS type were considered as experimental variables. As a result of the experiment, the capacity to resist the moment and drift ratio according to the strut shape of the steel damper was evaluated as very close. Finally, it was evaluated that the SV type steel damper has stable deformation and energy dissipation capability. As a result of the evaluation of the proposed damper transmission force, it is considered that the damper transmission force is evaluated larger than the applied horizontal force, and it is necessary to supplement it.

• Journal of Korean Association for Spatial Structures
• /
• v.24 no.3
• /
• pp.53-60
• /
• 2024

In this study, the performance evaluation of steel dampers was conducted based on existing research results. The test variables are cross-sectional shape and lateral deformation prevention details. As a result of performance tests according to cross-sectional shape, the circular cross-section was evaluated to be superior than the rectangular cross-section in terms of envelope, stiffness reduction, and energy dissipation capacity. In addition, it was evaluated that the rectangular cross-section where lateral deformation occurs can be restrained by lateral deformation prevention details, thereby improving strength and deformation capacity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.151-152
• /
• 2010

극성 [0001] 방향으로 성장 된 질화물 기반의 LEDs (light emitting diodes) 는 분극현상에 의해 발생하는 강한 내부 전기장의 영향을 받게 된다. 이러한 내부 전기장은 양자우물 내의 전자와 정공의 공간적 분리를 야기하고 quantum confined Stark effect (QCSE) 에 의한 발광 파장의 적색 편이가 발생하며 양자효율의 저하를 가져오게 된다. 이러한 문제를 해결하기 위해 양자 우물구조를 GaN 의 m-plane (100) 이나 a-plane (110) 등 비극성면 위에 성장하려는 시도를 하고 있다. 그러나 비극성면의 비등방성 (anisotropy) 으로 인하여 결정성이 높은 비극성 GaN을 성장하는 데에는 많은 어려움이 있다. 비극성 a-plane GaN 의 결정성과 표면 거칠기의 향상을 위해 경사각을 가지는 r-plane 사파이어를 기판으로 이용하는 연구들이 많이 진행되어 있다 [1-4]. 그러나 r-plane 사파이어 기판의 경사각과 표면의 pit 형성에 관한 상관관계의 체계적인 연구는 상대적으로 많이 진행되지 않았다. 본 연구에서는 경사각을 가진 r-plane 사파이어 기판에 유기금속화학증착법을 (MOCVD) 이용하여 a-plane GaN 을 성장하였으며, 성장 시 기판의 경사각이 a-plane GaN의 성장 거동 및 표면형상에 미치는 영향을 분석하였다. 본 실험에서는r-plane에서 m-axis방향으로 0도에서 -0.65도의 경사각을 가지는 r-plane 사파이어 기판을 이용하였다. a-plane GaN 성장에는 고온 GaN 핵 형성층을 (nucleation layer) 이용하는 2단계 성장 법이 사용되었다 [5]. -0.37도 보다 크기가 큰 경사각을 가진 r-plane 사파이어에 성장된 a-plane GaN의 표면에는 수 ${\mu}m$ 크기의 삼각형 형태의 pit이 형성되었다. 사파이어의 경사각이 -0.37도에서 -0.65도로 증가하였을 경우에, GaN의 m방향 X-ray 록킹커브 반치폭은1763 arcsec에서 1515 arcsec로 감소하였으나 표면에 삼각형 pit의 밀도는 103 cm-2 이하에서 $2{\times}106$ cm-2으로 증가하였다. 이러한 r -plane 사파이어 기판의 경사각의 차이로 표면에 pit이 발생과 결정성변화의 원인을 확인하기 위해서, 여러가지 다른 경사각을 가진 사파이어 기판의 표면에 성장된 핵 형성층의 표면 양상을 확인하였다. 발표에서는 경사각의 차이에 따른 기판 표면에서의 원자 step 구조와 GaN 의 핵 형성 간의 상관관계에 대하여 구체적으로 논의할 것이다.