• Journal of Korea Ship Safrty Technology Authority
• /
• s.33
• /
• pp.2-11
• /
• 2012

본 연구는 국내 보급을 위한 해양레저용 모터보트 개발을 목표로 하여 모터보트 설계부터 건조까지 개발 전과정에 대한 기반기술을 구축하고자 한다. 이번 호에서는 지난 호에 이어 일반배치도 및 구조도면 작성부분과 선박의 구매나 판매시 고객의 의견을 바로 가시화하여 확인할 수 있어 활용도가 높을 것으로 예상이 되는 맞춤형시스템 개발에 대한 부분에 대해 기술하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.911-916
• /
• 2014

The leisure boat industry has the potential to become a high-value-added industry in the future. Recently, a study on Korean high-speed leisure boats for fishing was conducted. This study suggests a product configuration model-based shipbuilding cost estimation method for determining the type of leisure boat suitable for mass production, as part of a research for productivity improvement. The suggested estimation method based on the analysis of the leisure boat process and generic YWBS can calculate quantitative and concrete data. By using this method, the cost of building the catamaran-type design ship can be reduced by 17 times, compared to that of the monohull-type mother ship. This implies that the final design of the Korean high-speed leisure boat for fishing will have a competitive price at the actual production stage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.413-416
• /
• 2014

Recently, demand for various leisure sports gradually increases, as people's sense of values changes into leisure-centered one according to the change of given social circumstance and the change of customer needs all over the world. The actual condition is that an interest and participation rate especially in water leports during the summer increases. And needs for various hull design of standardized boat for water leisure increase. Therefore, this paper is intended to develop a recommendation system to design a boat for water leisure by using the collaborative filtering technique in order to make it possible to actively cope with the change of various customer needs for hull design. To this end, emotion relating to kayak design was selected through consumer survey, and emotion was derived by factor analysis and assessment, and then a kayak design layout in the aspect of customer's emotional preference was presented. Besides, an analysis was made according to the elements such as hull, body, and propulsion system of kayak in order to select emotional words according to the kayak design reflecting user's preference, and then a boat model for water leisure in conformance with user's preference was presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.733-738
• /
• 2021

Recently, people's interest in marine leisure has been increasing, and research and development on leisure boats are actively being carried out to pioneer overseas markets. These days, the materials used for leisure boats are fiber-reinforced plastic (FRP) and aluminum alloy. However, FRP is hygroscopic and causes environmental problems, and aluminum alloy has high thermal conductivity and fire susceptibility. Therefore, titanium alloy is being adopted as a material for leisure boats instead. In this study, hull thicknesses and design pressures were calculated while considering dynamic effects for titanium boats. Four sets of rules and regulations were used: ISO 12215-5, RINA Pleasure Yacht, LR Special Service Craft, and KR High-speed Light Craft. The maximum bottom slamming loads were in the order of ISO, KR, LR, and RINA, and the required hull thicknesses were in the same order. This research might be helpful for understanding the rules, regulations, and overseas export of leisure boats.

• Composites Research
• /
• v.34 no.6
• /
• pp.350-356
• /
• 2021

When a ship with a planing line operates or turns in a straight line, the floating position and trim change according to the speed, and a large resistance is generated on the hull. In this paper, the resistance to a planing line was estimated through the computational fluid dynamics of a leisure boat with improved hull weight and durability by applying a carbon composite material to the hull. The resistance performance of the bow and stern of the 18ft class leisure boat was checked and the flow field of the entire vessel was estimated, and the stability of the planing line was confirmed by comparing the resistance of each trim through numerical analysis. In addition, it was confirmed that the designed planing line could withstand it sufficiently because the force applied to the hull was not large, and The stability of the boat was analyzed by calculating the wavelength of the wave and the length of the ship as the ratio of gravity to the inertial force and checking how much force the rolling occurred.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.259-272
• /
• 2008

In order to improve the productivity and quality of boat's mold in leisure boat industry, the development of modelling and machining technology of leisure boat's plug is strongly required. The traditional lines drawing approach by hand required the designer to both create fair curves and to make sure that the curves matched up to each other in the three main drawing views: profile, plan, and section. However, one will find when studying lines drawings in books that the curves might look smooth and fair, but the lines do not agree exactly in the three views. Therefore, the 2 dimensional drawing data of leisure boat are transformed using 3 dimensional design s/w and CAM s/w. In addition, the leisure boat is designed with a 3 dimensional s/w. The NC cutting data are generated by the CAM s/w. The surface characteristics of machined surface are investigated at various cutting conditions such as spindle speed, feed speed, and cutting material.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.3
• /
• pp.329-336
• /
• 2006

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.418-423
• /
• 2018

Recently, research and development of high-value leisure vessels has been carried out in Korea to revitalize the marine leisure industry and tap into the global maritime leisure market. FRP composite materials, which have excellent physical properties and are available for the manufacture of light hulls, are used widely. One of the most important design technologies is to secure structural safety of leisure vessels made from FRP composite materials. In this study, the structural strength was assessed for the design of an 8-meter high-speed planing leisure boat made from FRP composite materials. The design loads to verify the structural safety were calculated according to the rules for the classification of high speed light craft (KR, 2015), and structural analysis was conducted using a finite element model composed of an isotropic shell element, which has equivalent bending rigidity with the FRP sandwich panel. The analysis results were compared with the results of the strength test for fabricated specimens, and all internal structural components are sufficiently satisfied with the structural strength.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8447-8454
• /
• 2015

ISO 12215-5 standard describes allowable stress design specifications of monohull small boat with a length of hull between 2.5 m and 24 m constructed from fiber reinforced plastics, aluminium or steel alloys, glued wood or other suitable boat building material. If small boat hull is under 2.5m in overall length or nonstandard material is used as boat building material, structural reliability of small boat hull is assured by drop test specification, but not by structural design specification in accordance with ISO 12215-5. Drop test specification of boat hull can be applied to manufactured product. But it is difficult and complicated to apply drop test specification to structural design of boat hull. In this study, we present structural design method of polyethylene boat hull on the basis of longitudinal bending strength test specification.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.902-903
• /
• 2014

현재, 해양 레저 스포츠 산업이 발달로 인하여 해양 레저용 보트 산업도 발달해 나가고 있다. 그러나 세계적으로 친환경 기술 개발 관련 정책이 강화되고 있으며, 미국 및 유럽의 경우는 가솔린 엔진으로부터 배출되는 대기 오염 물질에 대한 환경규제를 점점 강화해 나가고 있다. 이러한 원인으로 인하여 친환경 배터리 충전식 전기모터시스템을 도입하고 있으며, 충전식 전기모터시스템에 사용되는 소형 모터 및 충전용 배터리에 대한 수요가 꾸준히 증가하고 있다. 본 논문에서는 배터리 충전식 전기모터시스템에 사용되는 직류 24[V] 환경에서 2.5[HP] 용량의 고출력 고효율의 선외기용 BLDC(Brushless Direct Current) 모터 제어기 및 모터 드라이브, 홀(Hall) 센서를 통한 BLDC 모터의 상태 파악 및 모터의 정/역 제어 및 속도제어에 대한 설계 방법을 제시하고자 한다.