• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.4
• /
• pp.108-117
• /
• 2009

Leissa claimed in his article that the Rayleigh method is not the same as the Ritz method for determining natural frequencies and its corresponding mode shapes and contended that Rayleigh's name should not be attached to the method. The present article examines the methods in viewpoint of admissible functions and its minimization process, and of the historical developments. It concludes that Leissa's assertion is relevant, although Rayleigh did apply a conceptual theory systematized from the Lagrange method, and given 38 years earlier than Ritz's 'masterly exposition of theory'.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11A
• /
• pp.1053-1062
• /
• 2008

This paper provides a general and compact expression for the probability density function (pdf) and the moment-generating function (MGF) of the maximal ratio combiner output over Rayleigh fading channels. It is then used to derive closed form expression bit error rate (BER) for M-PSK, M-PAM and M-QAM, respectively. A variety of simulations is performed and shows that they match exactly with analytic ones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.767-774
• /
• 1999

In this paper, we compare the performance of asynchronous W-CDMA system with different bandwidth. We take into consideration of wideband multipath channel environment which consists of discrete multipath components whose strength is Rayleigh distributed. Each CDMA system different bandwidth experience different effects of multipath because there are different number of multipath within one chip duration according to the spreading bandwidth. We derive the average error probability versus the capacity, and compare the capacity of W-CDMA systems using the RAKE receiver with EGC diversity.

• The KIPS Transactions:PartC
• /
• v.14C no.4
• /
• pp.383-388
• /
• 2007

In this paper, we propose a new signal frame structure based on Alamouti code that can maintain the same performance as Alamouti code and increase spectral efficiency. The proposed signal frame structure can increase spectrum efficiency to approach 1(bit/s/Hz) since it can process n bit data during (n+1) time slot. In order to verify two performances, we derive closed form BER via mathematical approach, and compare with the simulation result in Rayleigh fading plus AWGN channel. Then we find that the two performances are exactly same.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1A
• /
• pp.1-12
• /
• 2002

Ultra Wideband (UWB) system uses wide band signal, which power spectral density likes as a noise floor, so UWB system can be used high speed communication without interfering with other communication system. As this system doesn't use radio frequency carrier. Its structure would be very simple and consume very low power. For the first time, we adopted Rayleigh monopulse multiple access system. And under the AWGN, we analysis and compare error probability, the number of user and data rate of the two methods that pulse position modulation and antipodal. In the result, We concluded that the antipodal method had much better probability of error, the number of user and data rate than PPM.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.20 no.1
• /
• pp.37-44
• /
• 2017

Complexity of multiphase flows due to existence of more than two interface including free-surface in one system, cannot be simulated easily. Since more than two fluids affect to flows and disturb interface, non-linearities such as instabilities can be appeared. Among several instabilities on multiphase flows, one of representative is Rayleigh-taylor instability. In order to examine in importance of density disparity, several cases with numerous Atwood number are set. Moreover, investigation of influence on initial disturbance were also considered. Moving particle simulation (MPS) method, which was employed in this paper, was not widely used for multiphase problem. In this study, by adding new particle interaction models such as self-buoyance correction, surface tension, and boundary condition at interface models, MPS were developed having more strength of physics and robust. By applying newly developed multiphase MPS, considered cases are performed and compared each other. Additionally, though existence of disagreement of magnitude of rising velocity between theoretical values from linear potential theory and that of numerical simulation, agreement of tendency can be proved of similarity of result. the discordance of magnitude can be explained due to non-linear effects on numerical simulation which was not considered in theoretical result.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.3
• /
• pp.201-210
• /
• 1996

In this paper, we analyzed performance of a symbol timing recovery scheme for 16QAM Radio system. As a symbol timing recovery scheme, both maximum amplitude method(MAM) and wave difference method(WDM) are analyzed employing a pulse shaping filter, such as raised cosine filter(RCF) and nonlinear filter(NLF). Simulation result shows that the jitter performance of MAM or WDM using NLF is better than that using square root RCF. In order to estimate and compensate for the Rayleigh fading PSAM(Pilot Symbol Assisted Modulation) and space diversity are also employed. Consequently, BER performance of about $10^{-4}$ is obtained for $E_b/N_o$= 20 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.855-865
• /
• 1999

This paper presents the improvement of BER performance using fading compensation method for 16 QAM-TCM to reduce the effects of multi-path fading in mobile radio environments. We propose the multi-pilot symbol aided fading compensation technique using Gausian interpolation method for inter-symbol interference or fading distortion occured in frequency selective fading channel. The proposed system is combined coding and modulation scheme for improving the reliability of a digital transmission system without increasing the transmitted power or the required bandwidth. In the fading compensation, the pilot symbols from a known sequence is multiplexed into the data symbols at regular intervals to from a frames for transmission. And we use a modified bit reversal block interleaver to randomize burst errors. The results show that significant improvements in the bit-error rate performances can be achieved by the proposed techniques.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.7
• /
• pp.552-559
• /
• 2013

In this paper, the multiple-input multiple-output (MIMO) system with a precoder is considered in the transmit-correlated Rayleigh channels. We specifically target the MIMO system employing the minimum mean square error receivers. Based on random matrix theory, we first present a direct and generalized formulation for deriving a probability density function (PDF) of the signal-to-interference-plus-noise ratio (SINR). Then, we derive the accurate closed-form SINR PDFs for a small number of transmit and receive antennas. Based on the SINR PDFs, tight closed-form approximations of the symbol error rate (SER) are derived. Our analysis suggests that the SER approximations can be used to accurately estimate the error probabilities or as a useful tool for the system design.

• Journal of Digital Contents Society
• /
• v.1 no.1
• /
• pp.39-52
• /
• 2000

In this paper, we derive the BER performance of an asynchronous DS/CDMA system and analyze the improvement of BER performance through turbo coding and RAKE receiver in multipath Rayleigh fading and impulsive noise environments. As a result, impulsive noise affects the performance of the system more than multipath fading in lower $E_b/N_o$ than a certain threshold. However, in higher $E_b/N_o$, multipath fading are more dominant than impulsive noise. It is found that in lower $E_b/N_o$, turbo code improves the performance of the system against impulsive noise, and in higher $E_b/N_o$, RAKE receiver improves the performance of the system against multipath fading. Therefore, great improvement can be obtained by employing turbo code and RAKE receiver in multipath Rayleigh fading and impulsive noise environments.