• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2067-2068
• /
• 2006

초광대역 (UWB)통신기술을 응용한 다양한 무선측위시스템은 향후, 전기-IT융합 유비쿼터스 전기설비 환경의 센서네트워크에서 중요한 역할로 대두된다. 이러한 UWB기반의 무선측위시스템은 UWB송수신기 자체의 정밀거리산출기능의 정확도 정도에 따라 그 성능이 직접적으로 좌우된다. 본 논문에서는 현재 논의되고 있는 UWB 레인징기술에 대한 소개와 특히 저비용, 저전력 운영이 가능한 단순한 구조를 갖는 비가역성(Non-coherent) UWB 레인징 시스템구조에 대해 새롭게 제안하고자 한다.

• Journal of Aerospace System Engineering
• /
• v.12 no.1
• /
• pp.10-16
• /
• 2018

In 2018 and 2019, GEO-KOMPSAT-2A and GEO-KOMPSAT-2B will be launched in order to succeed the COMS mission. The two satellites will be collocated in $128.25{\pm}0.05$ degrees East. For precise ranging and orbit determination, the GEO-KOMPSAT-2B will be equipped with LRA (Laser Retroreflector Assembly) and SLR (Satellite Laser Ranging) systems will be utilized. This systems are located in Geochang. In this case, the laser beam emitted from the SLR station can cause problems in terms of safety of optical payloads and image quality. As a solution of this possibility, the laser ranging will be done during the night time when the shutters of the optical payloads remain closed. Still, the optical payload of the GEO-KOMPSAT-2A is not safe from the laser beam because its optical payload shall continue its mission for 24 hours a day. In order to handle this problem, the laser ranging shall be limited to time slots when the angular distance between two satellites observed from the Geochang SLR station is large enough. In this paper, through orbit simulations, the characteristics of variation of the angular distance between the two satellites is analyzed to figure out the time slots when laser ranging is allowed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7A
• /
• pp.569-580
• /
• 2012

In this paper, an enhanced initial ranging algorithm for large-cell coverage fixed wireless communication system is proposed. In typical wireless communication system such as WiBro, because a round-trip delay between a transmitter and a receiver is within one OFDM (Orthogonal Frequency Division Multiplexing) symbol duration, a frequency-domain differential correlation method is generally used. However, the conventional method cannot be applied due to an increase of a maximum time delay in large-cell system. In case of an accumulative differential method, estimation errors can occur because of frequent sign transitions. In this paper, therefore, we propose an algorithm which can estimate a total timing offset in a ranging channel structure for 15 km cell. The proposed method can improve performance by sign comparison based sign error correction rule between the estimated values and using a weighting scheme based on channel correlation, the number of accumulations, and the noise reduction effect in normalization process. Also, it can estimate the integer timing offset of symbol duration by comparing peak-powers after compensating for the fractional timing offset of symbol duration.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.92-96
• /
• 2010

We propose a new satellite OFDMA(Orthogonal Frequency Division Multiple Access) scheme with greatly enhanced tolerance of timing offset among the users. In uplink OFDMA systems, timing misalignment among users destroys subcarrier orthogonality and thus, it degrades the performance. In order to avoid this performance degradation, the accurate processing, so called 'ranging', is required to synchronize among users. However, ranging scheme is not available in the satellite systems due to the very long round trip delay. Exploiting the property that PSW(Propoerly Scrambled Walsh-code) code has zero correlation despite ${\pm}1$ chip timing offset, the proposed OFDMA achieves MAI free performance with the timing offset up to ${\pm}1$ OFDM symbol duration for the satellite systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1140-1144
• /
• 2012

In this paper, we propose a timing offset estimation scheme for initial ranging of IEEE 802.16e systems. The conventional scheme estimates the timing offset by using the cross-correlation between the local and received signals only. On the other hand, this paper proposes a timing offset estimation scheme with additional cross-correlations accumulated on the conventional cross-correlation. The additional cross-correlations are obtained by using the ranging signal with a repetitive structure. Numerical results show that the proposed scheme provides the better timing offset estimation performance compared with that of the conventional scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.11A
• /
• pp.1691-1698
• /
• 2000

ATM-PON은 다중점 연결을 가능케 하는 망으로 이의 핵심 기술에는 레인징 기술이 포함된다. 하지만 이 레인징 기술 측면에서는 ATM-PON 망의 생존성을 고려해 볼 때, ATM-PON 시스템이 망 장애에도 불구하고 가입자에게 계속적인 서비스를 제공하기 위해서는 대체선로로의 보호 절제를 수행해야 하나 이때 주로 선로와 대체 선로 간의 거리차에 의한 트래픽 충돌 문제가 발생한다. 본 논문에서는 보호 절제가 일어날 때 이러한 레이징의 문제를 해결하기 위하여 전송 지연 초기 결정 방식(방안1), OLT 내 지연 방식(방안 2), 혼합형 방식(방안 3)의 세가지 해결 방안을 제안하였고, ITU-T G.983.1에서 제시한 네 가지 보호 절제 구성을 통해 각 방식을 비교 분석하였으며, 이들의 장. 단점을 파악하여 각각의 시스템에 적합한 방식을 제시하였다.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.309-315
• /
• 1998

This paper describes an 8b 52 MHz CMOS subranging analog-to-digital converter (ADC) for Integrated Services Digital Network (ISDN) applications. The proposed ADC based on the improved time-interleaved architecture removes the holding time which is typically observed in the conventional double-channel subranging ADCs to increase throughput rate. Moreover, the ADC employs the interpolation technique in the back-end subranging ADCs far residue signal processing to minimize die area and power consumption. The fabricated and measured prototype ADC in a 0.8 um n-well double-poly double-metal CMOS process typically shows a 52 MHz sampling rate at a 5 V supply voltage with 230 mW, and a 40 MHz sampling rate at a 3 V power supply with 60 mW power consumption.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.4
• /
• pp.25-35
• /
• 2002

This work describes an 8b 200MHz time-interleaved subranging analog-to-digital converter (ADC) based on a single-poly digital CMOS process. Two fine ADCs for lower digital bits of the proposed ADC employ a time-sharing double-channel architecture to increase system speed and a new reference voltage switching scheme to reduce settling time of the reference voltages and chip area. The proposed intermeshed resistor string, which generates reference voltages for fine ADCs, improves linearity and settling time of the reference voltages simultaneously. The proposed sample- and-hold amplifier(SHA) is based on a highly linear common-drain amplifier and passive differential circuits to minimize power consumption and chip area with 8b accuracy and employs input dynamic common mode feedback circuits for high dynamic performance at a 200MHz sampling rate. A new encoding circuit in a coarse ADC simplifies the signal processing between the coarse ADC and two successive fine ADCs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7A
• /
• pp.540-547
• /
• 2009

In this paper, we work for the efficient use of the initial ranging contention slot in OFDMA based wireless mobile networks. Specially, the collision reduction method using an automatic adaptive optimal algorithm is studied for initial ranging contention slot used at initial connection of the mobile terminals. As a result, we propose the algorithm that achieves the collision minimization and the auto-dynamic slot arrangement of the initial ranging slots. To evaluate the proposed algorithm, we compare the simulation results of IEEE802.16e fixed initial ranging slot allocation method versus the proposed algorithm. The simulator is developed based on the IEEE802.16e standard MAC frame structure and processing procedures. As the simulation results, we can expect the proposed algorithm can be applied for the unmanned coastal base station because the proposed algorithm has the effect of minimizing administration cost for the base station.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.600-607
• /
• 2007

In this paper, we propose a MLKA (Multi-Level Keep-Alive) algorithm based on PRCG (Periodic In this paper, we propose a MLKA (Multi-Level Keep-Alive) algorithm based on PRCG (Periodic Ranging Code Group), in which periodic ranging codes are divided into groups. The AP (Access Point) performs this algorithm when a periodic ranging code arrives at the AP in a WiBro (Wireless Broadband Internet) system. In order to increase the traffic radio bandwidth resource efficiency in this system, we propose the multi-level keep-alive algorithm for finding abnormal AT (Access Terminal). From simulation results, it is verified our proposed MLKA algorithm based on PRCG can provide higher traffic radio resource efficiency compared to message-driven keep-alive algorithms.