• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.4
• /
• pp.123-133
• /
• 2005

This study has made photographing respectively by changing the converging angle by use of d7 $metric^5$ that is a measurement digital camera. And also in order to minimize the errors happened at the relative orientation, we have sorted out the round target that the relative orientation is automatically on the programming and have calculated RMSE by carrying out the bundle adjustment. We think that such a study could be used as very important basic data necessary in deriving the optimal photographic conditions by the close-range digital photogrammetry and in judging such a degree.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.191-196
• /
• 2019

The development of open-pit mines leads to large-area topographical changes in highland forests and can lead to severe deterioration of forests, requiring continuous monitoring. The drone photogrammetry is performed at a lower altitude than the existing manned aerial photogrammetry, and thus has a relatively high accuracy. The purpose of this study is to construct spatial information of large open pit mine using drone photogrammetry and to evaluate the accuracy and utilization of the results. The accuracy of the drone photogrammetric results was 0.018 ~ 0.063m in the horizontal direction and 0.027m ~ 0.088m in the vertical direction. These results satisfy the permissible accuracy of 1: 1,000 digital topographic map and it can be used for open mine monitoring. The geospatial information of the open pit mine can be used in various ways, and it can be used to monitor the quantitative change of a specific area for time series change through data management by periodic data acquisition. If drone photogrammetry is applied to open-pit mine monitoring in the future, work time and cost can be greatly reduced compared to the conventional GNSS or total station method, and the work efficiency can be greatly improved because more visible data can be generated.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.2
• /
• pp.227-234
• /
• 2006

Ministry of construction & transportation is operating for the soil and rock information system and is considered to accurate application of soil conversion factor that is essentially necessary for accurate calculation of earth volume. Since the balance of cutting earth in public work, the plan of spoil bank or borrow pit are directly related to construction costs, accurate calculation of earth volume and efficient scheme of haul are important. As such, this study has provided methods that can acquire information that is more rapid, applicable to job sites, and trustworthy by comparing resultant values of photogrammetry, laser scanning, or inside job site experimentations, and calculated soil conversion factor by applying photogrammetry and laser scanning methods for hard rock that has difficulty in calculating soil conversion factor. The study can provide alternatives that can resolve the problems of unbalanced earth volume that may arise in applying to plans the earth conversion factor that relies on planning books and experience without considering the characteristics of job site earth, and can establish its relevancy by calculating soil conversion factor for hard rock that has relative difficulties in doing inside or job site testing.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2006.05a
• /
• pp.152-157
• /
• 2006

Satellite imagery is generally used for investigating the damage from natural disaster for wide area and remotely piloted vehicle or aerial photos are used for the local damage. But for more detailed information such as damages of public facilities, these methods are inadequate and so in this case field surveying has been carried out. We tried to estimate the damage of public facilities faster and more accurately using photogrammetric method. We developed a digital stereo camera system by fixing two digital cameras on a frame, and with this system the photos of actually damaged areas were collected. The damages were estimated from these stereo photos. Then the estimated data was compared with field surveying data in order to verify our system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.296-296
• /
• 2017

본 연구에서는 대규모 유역에서 발생하는 침수 현상을 모의하기 위한 강력하고 정확하며 연산효율이 뛰어난 수치해석 모형을 개발하는 데 있다. 개발된 모형은 확산파 모형을 기본으로 하였고 다수의 코어를 동시적으로 해석하는 병렬연산 기법을 부가하였다. 홍수로 인한 대규모 유역에서의 침수해석은 오랜 시간의 연산 비용을 필요로 한다. 특히 수치화된 지형정보의 이용이나 고정밀 사진 측량 등의 방법을 이용하여 정밀하고 넓은 유역의 디지털 지형자료를 이용한 2 차원 침수해석은 연산 연산의 문제를 더욱 어렵게 할 수 있다. 그러므로 본 연구에서는 제내지나 하류 유역에 발생하는 홍수로 발생된 빠른 침수모의를 위해 병렬화된 침수 해석 모형을 이용하여 병렬 해석 모형의 적용성을 검토하고자 하였다. 연구를 위해 MPI 및 OpenMP 기법을 이용하여 2 차원 침수해석 프로그램의 원시코드를 개선하고 실제 제내지 및 실제 댐 하류유역에 적용하였다. 개발된 모형은 실제 제내지에 적용한 결과를 MPI, OpenMP 병렬해석 기법과 기존의 순차적 모형의 결과를 비교하였다. 모형들의 결과를 제내지의 침수양상, 침수 속도벡터의 방향 및 크기 등의 계산 결과 순차적 모형, MPI 및 OpenMP 모형과의 비교하여 연산 시간은 병렬 해석 모형이 우월함을 보였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.30-30
• /
• 2018

Research on mapping levees is an important task for assessing levee stability. The drone imagery acquired in river basins is useful for generating real-time levee maps. This research proposes a robust methodology for mapping levees in river basins using the drone imagery. In the first step, the multiple imagery taken in the test bed was acquired by the drone. Then, the orthorectified image and DEM (Digital Elevation Model) were generated by the photogrammetry and image processing process. Finally, the significant features on levee surfaces such as levee tops, levee lines, levee slopes, eroded areas were detected from the generated DEM and orthorectified image by manual labors and automatic methods. In future research, the automatic procedure for identifying the significant levee features from the drone imagery would be proposed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.1
• /
• pp.27-38
• /
• 1996

Non-scale digital map have important role in the field of GIS and other application area which using geographical data in recently against conventional map restricted by scale and information. The main objective of this study is to develope the automated map production system for small scale map in conjuction with generalization techniques in a digital environment. We will intend to develope algorithms and programs for each generalization operators based on specific terrain feature with vector data. This study will be performed aspects related to an data model development of generalization process, focussing on priority for processing sequency with maintaining vector topology, and error analysis for generalized digital data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.1
• /
• pp.751-760
• /
• 2009

This research aims to develop the strategy and method to enhance the reliability of image matching results and improve the efficiency of the matching process by utilizing LIDAR data in the main image matching processes. In this work, we present the methods to utilize LIDAR data in the selection of matching entities, the search for the matched entities and the evaluation of the matching results. The proposed method has been applied to medium-resolution digital aerial images and LIDAR data acquired at the same time. The results have been analyzed in comparison with an existing method using a virtual horizontal surface rather than LIDAR DEM. This analysis indicates that the proposed method can show significantly more improved performance than the existing method. The results of this study can contribute to the improvement of the currently available commercial image matching software and the enhancement of the DEM derived from LIDAR data and matching results.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.55-60
• /
• 2008

Inspection of steel columns which is one of the most critical elements in construction requires trained surveyor(s). Also it takes time to handle survey device(s) delicately for accurate measurements. To improve the inspection process of steel columns, the previous studies developed the AR prototype system, ARCam, and showed that ARCam is a promising inspection device that can reduce inspection time. However, ARCam still requires a surveyor to make measurements based on his visual perception and judgment This study proposes an algorithm for automatic inspection based on ARCam. The algorithm is based on image processing and computer vision and focuses on the inspection of steel column plumbness. This method will make measurements without a surveyor's judgment. The ultimate purpose of the automatic inspection is to minimize the surveying labor, thus reducing inspection time and cost.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.141-149
• /
• 2010

Three-dimensional geo-spatial information is important for the efficient use and management of the country and the three-dimensional expression and analysis of urban projects, such as urban plans devised by local governments and urban management. Thanks to the revitalization of the geo-spatial information service industry, it is now being variously used not only in public but also private areas. For the creation of high-guiltily three-dimensional geo-spatial information, emphasis should be placed on not only the quality of the source image and three-dimensional geo-spatial model but also the level of visualization, such as level of detail and texturing. However, in the case of existing three-dimensional geo-spatial information, its establishment process is complicated and its data are not updated frequently enough, as it uses ready-created digital maps. In addition, as it uses Ortho Images, the images exist Relief displacement. As a result, the visibility is low and the three-dimensional models of artificial features are simplified to reach LoD between 2 and 3, making the images look less realistic. Therefore, this paper, analyzed the quality of three-dimensional geo-spatial information created using the three-dimensional modeling technique were applied using Digital photogrammetry technique, using digital aerial photo images by an existing large-format digital camera and multi-looking camera. The analysis of the accuracy of visualization information of three-dimensional models showed that the source image alone, without other visualization information, secured the accuracy of 84% or more and that the establishment of three-dimensional spatial information carried out simultaneously with filming made it easier to gain the latest data. The analysis of the location accuracy of true Ortho images used in the work process showed that the location accuracy was better than the allowable horizontal position accuracy of 1:1,000 digital maps.