• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.90-99
• /
• 2009

In this paper, we proposed the new class-E frequency multiplier design that include the highest efficient characteristics. The proposed frequency multiplier is designed for 5.8[GHz] output using the frequency multiplier about 2.9[GHz] input signal. And studying in this paper is for the design and the implementation of the class E frequency multiplier. For the result, the maximum highest efficient characteristics 32[%] which is with output power 24.5[dBm] and 8.5[dB], is shown with frequency multiplier for the 2.9/5.8[GHz] class E. And we applied the linear method to the implemented class E frequency multiplier. As a result, the output spectrum for the linear is upgrade to 12[dB], 12[dB], 13[dB] of the ACPR characteristics on the +11[MHz], +20[MHz], +30[MHz] offset frequency in the center frequency. The result is satisfied with the 3.83[%] of the lineared EVM for the 64-QAM modulated method with the 54[Mbps] transmission velocity. In this paper, we show that the good compensation result of the linearity and the efficiency through the digital pre-linear method of the distortion with the frequency multiplier. Therefore, we suggested the frequency multiplier method are applying to WLAN, cellular, PCS, WCDMA, and etc.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.25-32
• /
• 2020

In this paper, we propose an image generator for OLED panel test that can compensate for color coordinates and luminance by using panel defect inspection and optical measurement while displaying images on OLED panel. The proposed image generator consists of two processes: the image generation process and the process of compensating color coordinates and luminance using optical measurement. In the image generating process, the panel is set to receive the panel information to drive the panel, and the image is output by adjusting the output setting of the image generator according to the panel information. The output form of the image is configured by digital RGB method. The pattern generation algorithm inside the image generator outputs color and gray image data by transmitting color data to a 24-bit data line based on a synchronization signal according to the resolution of the panel. The process of compensating color coordinates and luminance using optical measurement outputs an image to an OLED panel in an image generator, and compensates for a portion where color coordinates and luminance data measured by an optical module differ from reference data. To evaluate the accuracy of the image generator for the OLED panel test proposed in this paper, Xilinx's Spartan 6 series XC6SLX25-FG484 FPGA was used and the design tool was ISE 14.5. The output of the image generation process was confirmed that the target setting value and the simulation result value for the digital RGB output using the oscilloscope matched. Compensating the color coordinates and luminance using optical measurements showed accuracy within the error rate suggested by the panel manufacturer.

• Journal of Digital Convergence
• /
• v.17 no.8
• /
• pp.229-235
• /
• 2019

As the demand for broadband multimedia including the Internet explosively increases, the advancement of the subscriber network is becoming the biggest issue in the telecommunication industry due to the surge of data traffic caused by the emergence of new services such as smart phone, IPTV, VoIP, VOD and cloud services. In this paper, we have developed WDM(Wavelength Division Multiplexing)-PON(passive optical network) based on the 1-Gigabit Reach Externder (RE) technique to reduce optical core. Particularly, in order to strengthen the market competitiveness, we considered low cost, miniaturization, integration technique, and low power of optical parts. In addition, we have developed a batch system by integrating all techniques for reliability, remote management through the development of transmission distance extension and development of capacity increase of optical line by using RE technology in existing PON network. Based on system interworking with existing commercial 1G PON devices, it can be worthy of achievement of wide nationalization and optical core reduction by using this developed system. Based on these results, we are studying development of 10G PON technology.

• Journal of Broadcast Engineering
• /
• v.16 no.6
• /
• pp.986-995
• /
• 2011

In this paper, we propose a noise whitening decision feedback equalizer for single carrier frequency division multiple access (SC-FDMA) receivers. SC-FDMA has the same advantage as that of orthogonal frequency division multiple access (OFDMA) in which the multipath effect can be removed easily, and also solves the problem of high peak to average power ratio (PAPR) which is the main drawback of OFDMA. Although SC-FDMA is a single carrier transmission scheme, a simple frequency domain linear equalizer (FD-LE) can be implemented as in OFDMA, which can dramatically reduce the equalizer complexity. Moreover, some residual intersymbol interference in the output of the FD-LE can be further removed by an additional nonlinear decision feedback equalizer (DFE) in time domain, because the time domain signal is a digitally modulated symbol. In the conventional DFE, however, the noise is not white at the input of the decision device and correspondingly the decision is not optimum. In this paper, we propose an improved DFE scheme for SC-FDMA systems where a linear noise whitening filter is inserted before the decision device of the conventional DFE scheme. Through computer simulations, we compare the bit error rate performance of the proposed DFE scheme with the conventional equalizers.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.2
• /
• pp.95-103
• /
• 2013

An underwater acoustic (UWA) communication in shallow water is strongly affected by the water surface and the seabed acoustical properties. Every reflected signal to receiver experiences a time-variant scattering in sea surface roughness and a grazing-angle-dependent reflection loss in bottom. Consequently, the performance of UWA communication systems is degraded, and high-speed digital communication is disrupted. If there is a dominant signal path such as a direct path, the received signal is modeled statistically as Rice fading but if not, it is modeled as Rayleigh fading. However, it has been known to be very difficult to reproduce the statistical estimation by real experimental evaluation in the sea. To give an insight for this scattering and grazing-angle-dependent bottom reflection loss effect in UWA communication, authors conduct experiments to quantify these effects. The image is transmitted using binary frequency shift keying (BFSK) modulation. The quality of the received image is shown to be affected by water surface scattering and grazing-angle-dependent bottom reflection loss. The analysis is based on the transmitter to receiver range and the receiver depth dependent image quality and bit error rate (BER). The results show that the received image quality is highly dependent on the transmitter-receiver range and receiver depth which characterizes the channel coherence bandwidth.

• Journal of the Korean Society of Radiology
• /
• v.2 no.3
• /
• pp.19-25
• /
• 2008

Commercial analog x-ray detectors based on film cassettes have been showing problems such as with image storage and image transmission. Recently direct conversion material, photoconductor whit flat panel have been researched which generate the electron hole-pair (EHP). In this paper, we researched the electrical properties of the PbO and Lead(II) oxide PbO. film which fabricated by Particle-In-Binder(PIB) method. We compared tetragonal ${\alpha}$-PbO with orthorhombic ${\beta}$-PbO physical property. Tetragonal material was more than orthorhombic material in other paper. The solution was Poly Vinyl Butyral(PVB) in the PIB. We discussed about the sample of x-ray sensitivity, leakage current, Signal to Noise Rate and investigated SEM for the physical property of sample. We need to think more research ${\alpha}$-PbO material fabrication.

• Science of Emotion and Sensibility
• /
• v.13 no.1
• /
• pp.103-110
• /
• 2010

TPR(Total Physical Response) is a new representative learning method for children's education. Today's approach to TPR has focused on signals from a user which becomes input data in a human-computer interaction, but the accuracy of sensing from body signals(e. g. motion and voice) isn't so perfect that it seems difficult to apply on an education system. To overcome these limits, we suggest a mediating interface device which can detect the user's motion using correct numerical values such as acceleration and angular speed. In addition, we suggest new design requirements for the mediating device through analyzing children's behavior as human factors by ethnography research and protocol analysis. As a result, we found that; children are unskilled in physical control when they use objects; tend to lean on an object unconsciously with touch. Also their behaviors are restricted, when they use objects. Therefore a mediating device should satisfy new design requirements which are make up for unskilled handling, support familiar and natural physical activity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.869-872
• /
• 2008

This paper presents the VHDL implementation procedure of the passive RFID tag in Ultra High Frequency RFID system. The operation of the tag compatible with the EPCglobal Class1 Generation2(GEN2) protocol is verified by timing simulation after synthesis and implementation on prototyping board. Due to the reading range with relatively large distance, a passive tag needs digital processor which facilitates faster decoding, encoding and state transition for enhancement of the interrogation rate. Also with UART communication, verify a inventory Round in Gen2 Protocol. The verification results with the fastest data rate, 640kbps, and multi tags environment scenario show that the implemented tag spend 1.4ms transmitting the 96bits EPC to reader.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.687-698
• /
• 2014

ATSC is currently working on standardization of hybrid 3DTV broadcasting service in heterogenous network environment after completion of service-compatible 3DTV broadcasting service standard based on broadcasting channel. This paper proposes a convergence 3D video broadcasting method on broadcasting and IP network while guaranteeing a Full-HD 3D quality without degrading the image quality of legacy DTV. Specifically, this paper describes transmission of the 3D additional video using the ISO/IEC 23009-1 DASH, robust synchronization method under heterogenous network environments and system target decoder model for hybrid 3DTV receiver. Based on experimental results, we confirm that proposed technologies can be used as a core technology in the hybrid 3DTV standardization and a reference model for a development of hybrid 3DTV encoder and receiver.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.119-128
• /
• 2014

The environmental survey in advance in the construction works is very important for planning and designing as well as the service of field survey before carrying out construction. The topographical application of spatial information coupled with USN is the very economical method for the survey and research every processing stage of construction field in advance. Therefore the execution of very important role for environmental planning and fundamental designing of construction reduces the unnecessary trial and error through the environmental survey in advance. In this research the environment of existent construction field is transformed to that of digital spatial information by fusing the sensor network with wireless technique on the base of spatial position. In addition, the sink sensor cumulates the environmental data measured from each USN sensor using small wireless environmental sensors installed at the construction site and changes of various environmental data at the present constructing site are able to be monitored at 3-D topographical space in real time by using the method for transmitting the image of PC output based on TinyOS.