• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.89-97
• /
• 2015

Plant factory was started in Europe in the 1960. Thanks to the development of seeds science, nutrient study, environment control technology and automated systems, it has developed into the form of full artificial light system. In recent years, productivity of plant factory has increased with the convergence of ICT. An interest in plant factory has increased with several outstanding achievements. However, the plant factory industry is still stuck at an introductory stage and government investment has been reduced. In order to verify the feasibility of the plant factory, we conducted a survey targeting experts in politics, R&D and business field. We analyze the feasibility of investment in plant factory and strategies to enhance the competitiveness of plant factory.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.2
• /
• pp.41-50
• /
• 1993

This paper describes an effort to develop a microcomputer-based parameter identification system for three phase and two phase brushless DC motor. Back EMF equation is derived from back EMF waveform of three phase and two phase brushless DC motor. In this paper, a new identification algorithm for the brushless DC motor parameters by Pasek's technique is developed. It is found that Pasek's equation is valid for the brushless DC motor, too. The results obtained clearly shows that it is possible to implement the identification system for the determination of the brushless DC motor parameters. To minimize errors due to the ripple component in the measured armature current, digital averaging firis employed. The whole identification process of signal generation, measuring, parameter determination is fully automated. The use of the propod method in the parameter identifition system shows that the averaged current curve is in excellent agreement with the estimated current curve. Therefore, this close agreement confirms the validity of this technique.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.12
• /
• pp.2568-2574
• /
• 2011

31 December 2012 will be the end of terrestrial analog broadcasting. Digital broadcasting will begin. The picture quality on analog broadcasting, was not a problem. but, In digital broadcasting, is a problem. Service for streaming on the digital broadcasting MPEG video compression. And the content is added block noise. These block noise measured by people's eyes. but, people's eyes is subjective. In this paper, the on-reference methods to detect block noise. And detected by measuring the distribution of block noise, to quantify the levels of block-noise. With this study, block noise by visual inspection using an automated tool, by being objective measure of information and communication will contribute to the development of the video.

• Journal of KIISE:Software and Applications
• /
• v.29 no.11
• /
• pp.803-808
• /
• 2002

This paper describes automatic methods for detection of kidney and kidney tumor on abdominal CT scans. The abdominal CT images were digitalized using a film digitizer and a gray-level threshold method was used to segment the kidney. Based on texture analysis results, which were perform on sample images of kidney tumors, SEED region of kidney tumor was selected as result of homogeneity test. The average and standard deviation, which are representative statistical moments, were used to as an acceptance criteria for homogeneous test. Region growing method was used to segment the kidney tumor from the center pixel of selected SEED region using a gray-level value as an acceptance criteria for homogeneity test. These method were applied to 113 images of 9 cases, which were scanned by GE Hispeed Advantage CT scanner and digitalized by Lumisvs LS-40 film digitizer. The sensitivity was 85% and there was no false-positive results.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.59-71
• /
• 2020

The paper reports on a systematic literature review results concerning the smart factory research in Korea. 144 papers were identified from the articles published in Korean journals listed in the Korean citation index by keyword search related to smart factory. Bibliometric analyses were conducted by way of co-occurrence and network analysis using the VOSViewer. Automation, intelligence, and bigdata were identifed as three critical clusters of research while, operating systems, international policy and cases, concept analysis as other three clusters of research. Internet of Things turned out to be a key technology of smart factory linking all of these areas. Servitization studies were small in numbers but seemed to have a lot of potential. Security researches seemed to be lacking connections with other areas of studies. Results of this study can be used as a milestone for identifying future research issues in smart factories.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.385-391
• /
• 2020

Overcurrent and abnormal voltages in the distribution system can cause not only burden of power plant but also damage to customers. As a result, researches related to the distribution automation have been widely conducted by utilizing a real time digital simulation to improve the reliability of power supply through rapid failure handing, reduction of power failure intervals and failure recovery. However, the distribution automation systems using the real time digital simulator are expensive and limited to verify actual hardwares. Therefore, in this paper, an external hardware devices was developed based on the distribution system analysis results of the digital simulator. And real-time simulation and functional verification are implemented by the real feeder remote terminal units used in distribution automation. The effectiveness of the proposed system is verified through several experiments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.3
• /
• pp.158-164
• /
• 2002

2-6 GHz digital phase shifter module has been designed and fabricated. For the broadband operation and performance, MMIC phase shifter chip for phase shifter module was designed and fabricated by using the reflection-type circuits with Lange coupler. The fabricated phase shifter module shows 6.1$^{\circ}$RMS phase error, 13.5 dB maximum insertion loss, and 8 dB and 10 dB input and output return losses, respectively. Computer controlled measurement systems are realized in order to get the measured data of 32 phase states. The RMS insertion phase error and the average insertion loss deviation among 8${\times}$8 modules for the phased-array system are less than ${\pm}$0.5$^{\circ}$and ${\pm}$0.5 dB, respectively. The size of fabricated phase shifter module is 45 ${\times}$ 22.5 ${\times}$60㎣.

• Journal of Digital Contents Society
• /
• v.7 no.2
• /
• pp.103-108
• /
• 2006

Short-range wireless communication and networking technologies are becoming increasingly important in enabling useful mobile applications. for example, ZigBee technology is expected to provide low cost and low power connectivity for equipment that needs battery life as long as several months to several years. In addition, ZigBee can be implemented in mesh networks larger than is possible with Bluetooth. The main features of this ZigBee standard are network flexibility, low cost, very low power consumption, and low data rate in an adhoc self-organizing network among fixed, portable and moving devices. Home network/Home automation is one of the key market areas for Zigbee, with an example of a simple network This paper investigates the effect of short range wireless channel on the performance of Zigbee system and DSSS-BPSK signal transmission in AWGN, interference and Rician fading environments. And we investigate performance degradation due to interference and fading effects in short range wireless channel. In particular, the impacts of the fading and interference level on the bit error probability is shown in BER performance figures.

• Journal of Korea Multimedia Society
• /
• v.11 no.9
• /
• pp.1245-1257
• /
• 2008

The establishment of a production pipeline imported 30 computer graphics is suggested in this paper to improve the efficiency of existing production pipeline of clay animation. The point is that the process of building clay characters that remains labor intensive among the existing procedures is replaced by the process of creating computer generated characters. In order to create characters out of clay by means of 30 computer graphics, a diffuse map and displacement map are made of an oil-based clay according to the UVW coordination of polygon modeling, which is the same color and kind of clay used to make a clay character. In addition, a panoramic HDRI recording system is developed to record the lighting information of shooting environment for miniature sets, which is imported in 3D computer graphic tools as digital light source. On account of the new production pipeline, a hyper realistic rendering image can be produced, and at the same time it improves the traditional pipeline of stop motion animation that is know-how based procedure of a complete artist by the engineering approach to the automatic process.

• Journal of Digital Convergence
• /
• v.15 no.5
• /
• pp.107-115
• /
• 2017

Recently, much attention in building smart factory have been dramatically increased. Despite the growing interest in smart factory, few guidelines exist how to successfully build smart factory. The purpose of this study is to investigate successful cases in building smart factory in Korea. Drawing on the analysis of successful cases, we suggest the valuable guidelines and directions toward success of smart factory. As a result, in the case of large-size firms, it is an effective strategy that expanding from a model factory to whole factory for successful smart factory building. In addition, in the case of medium and small-size firms, it is an effective strategy that upgrading from low-level step to high-level step for successful smart factory building. Therefore, this study provides companies and government with specific and practical success strategies as well as industrial policy improvements.