• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.39-46
• /
• 2016

This paper describes the third order feedforward delta-sigma modulator with inverter-based integrators and a 1.5bit comparator for the application of audio signal processing. The proposed 3rd-order delta-sigma modulator is multi-bit structure using 1.5 bit comparator instead of operational amplifier. This delta-sigma modulator has high SNR compared with single-bit 4th-order delta-sigma modulator in a low OSR. And it minimizes power consumes and simplified circuit structure using inverter-based integrator and using inverter-based integrator as analogue adder. The modulator was designed with 0.18um CMOS standard process and total chip area is $0.36mm^2$. The measured power cosumption is 28.8uW in a 0.8V analog supply and 66.6uW in a 1.8V digital supply. The measurement result shows that the peak SNDR of 80.7 dB, the ENOB of 13.1bit and the dynamic range of 86.1 dB with an input signal frequency of 2.5kHz, a sampling frequency of 2.56MHz and an oversampling rate of 64. The FOM (Walden) from the measurement result is 269 fJ/step, FOM (Schreier) was calculated as 169.3 dB.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.3
• /
• pp.571-580
• /
• 2014

Digital Records, which are created, stored, and managed in digital form, contains security vulnerability such as data modification, due to the characteristic of digital data. Therefore it is necessary to guarantee the reliability by verification of integrity and authenticity when managing digital records. This paper propose digital forensics based migration process for electronic records by analyzing legacy digital forensics process, and derives the requirements to develop digital forensics based electronic records migration tool through analyzing trends of abroad digital records migration technique and tool. Based on these develop digital forensic based digital records migration tool to guarantee integrity and authenticity of digital records.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.2
• /
• pp.93-102
• /
• 2013

These days digital data have become essential for digital investigation because most of the crime was occurred by using the digital devices. However, digital data is very easier to falsify or delete. If digital data was deleted, it is necessary to recover the deleted data for obtain digital evidence. Even though file carving is the most important thing to gather. digital evidence in digital forensic investigation, most of popular carving tools don't contemplate methods of selection or restoration for digital forensic investigation. The goal of this research is suggested files which can obtain useful information for digital forensic investigation and proposed new record file carving technique to be able to recover data effectively than before it.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.331-341
• /
• 2002

It is expected that the SCM (Subcarrier Multiplexing) optical link system, in which a number of small scale base stations with only antenna and RF transceiver are connected to central station through optical fiber, is in demand. In order to analyze the performance of SCM optical link system fur RF signal transmission, MZ(Mach-Zehnder) modulator's transfer function is modelled as nonlinear form with the cube of input signal. And considering the multiple access interferences occurred In the demodulation of other users'CDMA signals with multipath components after passing through MZ modulator, the BER performance is analyzed.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.123-124
• /
• 2008

본 논문에서 설계한 온도센서는 $0.l8{\mu}m$ CMOS 공정으로 $-55^{\circ}C{\sim}125^{\circ}C$의 온도 범위에서 ${\pm}0.1^{\circ}C$의 정확도를 갖는다. 이 센서는 parasitic PNP 트랜지스터로 온도 변화에 따른 전압을 추출하고 시그마-델타 변조기를 이용하여 디지털 온도 값을 얻기 위한 비트스트림을 생성한다. 또한, 이상적이지 않은 요소로 인해 발생할 수 있는 에러를 $0.01^{\circ}C$ 레벨로 감소시키기 위해 DEM(Dynamic Element Matching)과 2차 시그마-델타 변조기를 이용하였고, Bandgap Reference 회로로 온도 변화에 상관없이 일정한 bias 전압을 생성한다. 설계된 온도센서의 면적은 PAD를 포함하여 $0.98mm{\times}0.92mm$이고, 1.8V 단일 전원에서 동작한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.2
• /
• pp.309-314
• /
• 2012

In this paper, we present surface-to-underwater visible light communication systems using white LEDs. Pulse position modulation (PPM)-based analogue data communications and on-off keying-based digital data communications systems are developed. Inexpensive and commercial power-LEDs and photo-diodes are used to construct two types of systems. We report the experimental results obtained from the prototype systems to show the possibility of an optical underwater visible light transceiver as a basis for short range underwater wireless network. Their performance deteriorates more than the atmosphere's one because of attenuation and scattering of the light in water, but these results are promising for the potential to create more robust network interface that improve medium performance such as a LED modulation and a photo-detector demodulation.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.800-804
• /
• 2018

This paper presents a novel HF band differential quadrature phase-shift keying (DQPSK) orthogonal frequency-division multiplexing (OFDM) communication system. The system can deliver 3.6 kbps with a bandwidth of about 3 kHz. In a digital modem, OFDM with 32-point fast Fourier transform is used. In the system, each subcarrier uses DQPSK modulation. Hence, a demodulator does not require carrier phase recovery and symbol timing recovery. And, each subcarrier employs CRC error check code individually. By using CRC code for each subcarrier, bit error caused by multipath fading can be recovered simply.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.2
• /
• pp.122-136
• /
• 1986

In this paper, the new modulation system, the digital phase-frequency hybrid modulation system is proposed for mobile radio communications. The error rate and the outage equation of PFSK(Phase-Frequency Shift Keying) signal transmitted through the fading channel has been derived considiering deversity techniques. The error rate and the outgae rate performances of PFSK system have been evaluated and shown in figures in terms of carrier-to-noise power ratio(CNR), fading figure, numbers of diversity branches, correlation coefficient among the diversity branches. And the performance of PFSK system is superior to that of QDPSK system. And by using diversity techniques, system performances can be improved 13dB above in CNR.

• Journal of Internet of Things and Convergence
• /
• v.9 no.6
• /
• pp.23-28
• /
• 2023

Windows operating system generates various logs with timestamps. Timestamp tampering is an act of anti-forensics in which a suspect manipulates the timestamps of data related to a crime to conceal traces, making it difficult for analysts to reconstruct the situation of the incident. This can delay investigations or lead to the failure of obtaining crucial digital evidence. Therefore, various techniques have been developed to detect timestamp tampering. However, there is a limitation in detection if a suspect is aware of timestamp patterns and manipulates timestamps skillfully or alters system artifacts used in timestamp tampering detection. In this paper, a method is designed to detect changes in timestamps, even if a suspect alters the timestamp of a file on a storage device, it is challenging to do so with precision beyond millisecond order. In the proposed detection method, the first step involves verifying the timestamp of a file suspected of tampering to determine its write time. Subsequently, the confirmed time is compared with the file size recorded within that time, taking into consideration the performance of the storage device. Finally, the total capacity of files written at a specific time is calculated, and this is compared with the maximum input and output performance of the storage device to detect any potential file tampering.

• Journal of Korea Multimedia Society
• /
• v.12 no.7
• /
• pp.953-961
• /
• 2009

The usage of DRM-applied digital contents reduces user's convenience, thus it leads the many users to avoid using DRM-applied digital contents. In this paper, therefore, we propose the new distribution model in which the users, who purchase the DRM-applied digital contents, can resale freely those contents to the other users. As a result, the proposed model induces the users to distribute contents soundly by including them in one of distribution objects. For the purpose of this, in this paper, we propose that a packaged content and usage rights are transferred to another user by using a method which based on some existing digital ticket or coupon. In addition, the security of the proposed system is discussed for the double transfer, the forgery and the modification of usage rights, and the reproduction of contents and usage rights.