• Journal of The Korean Association of Information Education
• /
• v.6 no.3
• /
• pp.328-337
• /
• 2002

Looking at multimedia education contents from a design point of view, the instructor's design model may differ from the child's understanding model due to gap of the instructor's and child's knowledge. This fact implies it impacts the effectiveness of the education contents. The learning efficiency of Korean typography in WBI for children depends on the font-family, line space, font-size, the age of user, the output device such as the monitor, and other various factors. In this paper, we measured and analyzed on readability of Korean typography in WBI for children by reading speed method. The results of experiments show that readability depends on the font-family of typography, age(grade), and sex of children. In detail, "Goolymche" has the shortest time to be read, and girl and the highest grade students of elementary school have shorter time than boy and the lower grade students. Moreover, we consider the elegance of typography in WBI for holding children's interests because they prefer "Yopseoche". We provide some CSSs in WBI for children based on the experimental results, to used in school fields.

• Journal of KIISE
• /
• v.42 no.11
• /
• pp.1441-1451
• /
• 2015

As one of the most spotlighted research areas, these days, the Internet of Things (IoT) aims to provide users with various services through many devices. Since there exist so many devices in IoT environments, it is inefficient to manually configure the domain name system (DNS) names of such devices. Thus, for IPv6-based IoT environments, this paper proposes a scheme called the DNS Name Autoconfiguration (DNSNA) that autoconfigures an IoT device's DNS name and manages it. In the procedure for generating and registering an IoT device's DNS name, the standard protocols of the Internet Engineering Task Force (IETF) are used. Since the proposed scheme resolves an IoT device's DNS name into an IPv6 address in unicast through a DNS server, it generates less traffic than multicast-based mDNS (Multicast DNS) which is a legacy DNS application for the DNS name service in the smart home. Thus, the proposed scheme is more appropriate in multi-hop IoT networks than mDNS. This paper explains the design of the proposed scheme and its service scenarios, such as smart home and smart road. It also explains the implementation and testing of the proposed scheme in the smart grid.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2639-2644
• /
• 2013

The renewal cycle, which newly decorates stores, has been shortened, as the marketing competition between telecommunication companies has been extended to the stores, due to the rapid increase of mobile phone users and fast replacement cycle of products. The store renewal made by major telecommunication companies, including signboard, has been pushed in order for telecommunication companies to give strong impression about their own brand identity to consumers. Consumers want stores not only to sell cheap and high quality products but also to provide customer experience, by which customers can feel store, product and service and accept them. Especially, since the competition between telecommunication companies is getting tough, it is the current trend that the number of stores is increasing much, and telecommunication companies are recently renewing their stores, with the concept of SI(Store Identity), which changes store image into the incorporated image including interior and exterior, rather than just replacing CI(Corporate Identity), when they renew stores. It can be said that SI(Store Identity) is an important factor, by which companies consistently design visual factors such as interior and sign, and then apply them to the interior and exterior of the stores, and thereby give good store image to consumers, and ultimately have great effect on the increase of sales volume. This kind of activity can be image-controlled by companies' Identity Management, and it can be a very important factor in terms of marketing. In this study, it has an objective to compare and analyze SI of domestic telecommunication companies and foreign telecommunication companies, and then suggest effective SI direction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.93-99
• /
• 2017

The rate of traffic accidents that occurred in Korea last year is 10 out of every 100,000 people, ranking it 6th among the 35 OECD member countries. The accident rate of children with disabilities and elderly people is also high. The purpose of this study is to introduce traffic safety facilities which have been developed for the reduction of traffic accidents in non-urban areas in Korea through an analysis of the related literature, the accident factors using traffic accident analysis system data and traffic accident characteristics. Traffic safety integrated facilities for ICT-based pedestrian crossings are subject to cross-sectional coverage of child protection zones. The smart safety fence prevents vehicles from parking illegally and informs pedestrians that there is an access vehicle on the pedestrian crossing. The smart bump is designed to warn drivers who are not aware of the pedestrians. In order to standardize the appropriate form and size of the traffic safety facilities for pedestrian crossings, we constructed a standard model for each type, considering the road function, press classification, power, lane number, geometric form, etc. As a result, the rate of traffic accidents involving vulnerable people was reduced. In addition, it is anticipated that the maintenance costs will be reduced by the use of a solar power supply and their compatibility with the existing installed safety fences.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.509-517
• /
• 2020

This study evaluated the importance of technical characteristics in manufacturing street furniture using 3D printing technology to suggest the direction of development of high priority 3D printing technology. The importance was analyzed by the QFD, quantified by scores and the priority of the items was summarized. As a result, the 'output size', 'shrinkage of material', and 'output angle' were derived as technical elements that should be prioritized in development and research. For verification, the design of atypical street furniture was made into a large 3D printed output and the development direction was suggested by applying the technical elements of priority during the manufacturing process. Street furniture should be designed based on functionality and stability, as well as economic efficiency, productivity, and aesthetics. Therefore, the 'output size' ensured stability by minimizing the division of parts, and the 'contractability of materials' satisfied the aesthetic and productivity by minimizing the error of form. Finally, the 'output angle' was verified by improving the quality of the output and selecting an angle with efficient and structural stability through various output angles.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.389-394
• /
• 2015

There is a progressive development in the medical imaging technology, especially of descriptive capability for anatomical structure of human body thanks to advancement of information technology and medical devices. But however maintenance of correct posture is essential for the medical imaging checkup on the shoulder joint requiring rotation of the upper limb due to the complexity of human body. In the cases of MRI examination, long duration and fixed posture are critical, as failure to comply with them leads to minimal possibility of reproducibility only with the efforts of the examiner and will of the patient. Thus, this study aimed to develop an auxiliary device that enables rotation of the upper limb as well as fixing it at quantitative angles for medical imaging examination capable of providing diagnostic values. An auxiliary device has been developed based on the results of precedent studies, by designing a 3D model with the CATIA software, an engineering application, and producing it with the 3D printer. The printer is Objet350 Connex from Stratasys, and acrylonitrile- butadiene-styrene(ABS) is used as the material of the device. Dimensions are $120{\times}150{\times}190mm$, with the inner diameter of the handle being 125.9 mm. The auxiliary device has 4 components including the body (outside), handle (inside), fixture terminal and the connection part. The body and handle have the gap of 2.1 mm for smooth rotation, while the 360 degree of scales have been etched on the handle so that the angle required for observation may be recorded per patient for traceability and dual examination.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.227-227
• /
• 2012

Cryopump는 반도체 임플란타 공정, OLED분야, 신소재 개발, 표면분석 및 처리, 의료분야, 입자가속기, 핵융합 등 다양한 진공분야에 응용되는 고진공용 극저온펌프이다. 특히 향후로의 산업구조는 디스플레이, 반도체, IT 산업분야로 집중 재편될 것이기에, 이에 따른 핵심제조장비인 고진공 펌프의 수요가 급증할 것으로 판단된다. 그리고 이를 위한 핵심부품과 장비들의 국산화가 시급한 실정이다. 기술적인 측면에서 보자면 GVT는 미국의 Varian과 일본Ebara의 Cryopump 제조기술을 원천으로 한 회사로써 현재는 국내 유일의 G-M냉동기와 Cryopump 제조기술을 보유한 업체이다. 그리고 최근 오랫동안 정체되었던 관련 기술을 발전시켜 최적화된 한국형 G-M 냉동기 및 이를 장착한 다양한 사이즈의 고성능 Cryopump를 출시하게 되었다. 가장 큰 수확은 Cryopump의 성능을 크게 향상시켰으며 무엇보다 고객맞춤형으로 디자인할 수 있을 정도의 기술력을 확보하게 되었다는 점이다. Cryopump의 성능은 장착되는 Cryocooler(G-M냉동기)의 성능과 밀접한 관련이 있기 때문에 일차로 Cryocooler의 성능을 개선하고 이차로 이를 장착한 Cryopump의 성능을 개선하였다. 본 연구는 일차로 진행된 HP Series 2단 Cryocooler 4가지 모델 중 가장 범용인 HPM 모델과 HPS모델에 대한 제작과 성능시험에 관한 것이다. 이는 각각 기존의 ICP Series 펌프에 장착되던 Expander 535 모델 및 Expander 855 모델에 대한 설계 최적화의 결과물로써 내용은 Cryocooler에 대한 'Typical Performance Test(1st STG와 2nd STG의 온도가 각각의 Stage에 인가되는 Heat Load에 의해 그물망 형태의 그래프가 되도록 수행하는 시험법)'의 절차를 따라 수행되었다. HPM Cryocooler의 성능은 2nd STG Temp. 20K 와 1st STG Temp. 80K를 Heat Load 기준으로 하였을 경우, 각각 8.2W, 55.0W의 성능을 나타내었고 HPS Cryocooler의 성능은 2nd STG Temp. 20K 와 1st STG Temp. 72K를 Heat Load기준으로 하였을 경우, 각각 14.0W, 90.0W의 성능을 나타내었다. 1st STG Temp.를 72K로 정한 이유는 Power Supply의 용량 한계로 인해 90W이상의 Heat Load를 인가할 수 없었기 때문이다. 만약 성능 그래프의 경향성을 고려하여 1st STG Temp. 80K로 가정한다면, 각각 약 13W, 100W 정도의 성능을 가질 것으로 추정된다. 단, 본 시험에 사용된 Compressor는 GVT의 HC80Plus 모델로 내부에는 Helium용 5HP급 Scroll Type의 Compressor가 장착되어 있으며, 봉입압력 250Psig에 저압 100Psig기준, 65scfm의 유량을 가지는 압축기이다. 압축기와 Cryocooler의 조합은 1:1이었고 시험방법은 Cryocooler에 대한 GVT 자체규정에 따라 진행되었으며 밤과 낮 및 공장전체의 부하변동에 따른 냉각수 온도변화에 따른 펌프의 성능변화는 고려되지 않았다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.118-118
• /
• 2012

Cryopump는 반도체 임플란타 공정, OLED분야, 신소재 개발, 표면분석 및 처리, 의료분야, 입자가속기, 핵융합 등 다양한 진공분야에 응용되는 고진공용 극저온펌프이다. 특히 향후로의 산업구조는 디스플레이, 반도체, IT 산업분야로 집중 재편될 것이기에, 이에 따른 핵심제조장비인 고진공 펌프의 수요가 급증할 것으로 판단된다. 그리고 이를 위한 핵심부품과 장비들의 국산화가 시급한 실정이다. 기술적인 측면에서 보자면 GVT는 미국의 Varian과 일본Ebara의 Cryopump 제조기술을 원천으로 한 회사로써 현재는 국내 유일의 G-M 냉동기와 Cryopump 제조기술을 보유한 업체이다. 그리고 최근 오랫동안 정체되었던 관련 기술을 발전시켜 최적화된 한국형 G-M 냉동기 및 이를 장착한 다양한 사이즈의 고성능 Cryopump를 출시하게 되었다. 가장 큰 수확은 Cryopump의 성능을 크게 향상시켰으며 무엇보다 고객맞춤형으로 디자인할 수 있을 정도의 기술력을 확보하게 되었다는 점이다. Cryopump의 성능은 장착되는 Cryocooler (G-M냉동기)의 성능과 밀접한 관련이 있기 때문에 일차로 Cryocooler의 성능을 개선하고 이차로 이를 장착한 Cryopump의 성능을 개선하였다. 본 연구는 일차로 진행된 HP Series 2단 Cryocooler 4가지 모델 중 가장 범용인 HPM 모델과 HPS모델에 대한 제작과 성능시험에 관한 것이다. 이는 각각 기존의 ICP Series 펌프에 장착되던 Expander 535 모델 및 Expander 855 모델에 대한 설계 최적화의 결과물로써 내용은 Cryocooler에 대한 'Typical Performance Test(1st STG와 2nd STG의 온도가 각각의 Stage에 인가되는 Heat Load에 의해 그물망 형태의 그래프가 되도록 수행하는 시험법)'의 절차를 따라 수행되었다. HPM Cryocooler의 성능은 2nd STG Temp. 20K와 1st STG Temp. 80K를 Heat Load기준으로 하였을 경우, 각각 8.2W, 55.0W의 성능을 나타내었고 HPS Cryocooler의 성능은 2nd STG Temp. 20K 와 1st STG Temp. 72K를 Heat Load기준으로 하였을 경우, 각각 14.0W, 90.0W의 성능을 나타내었다. 1st STG Temp.를 72K로 정한 이유는 Power Supply의 용량 한계로 인해 90W이상의 Heat Load를 인가할 수 없었기 때문이다. 만약 성능 그래프의 경향성을 고려하여 1st STG Temp. 80K로 가정한다면, 각각 약 13W, 100W 정도의 성능을 가질 것으로 추정된다. 단, 본 시험에 사용된 Compressor는 GVT의 HC80Plus 모델로 내부에는 Helium용 5HP급 Scroll Type의 Compressor가 장착되어 있으며, 봉입압력 250Psig에 저압 100Psig기준, 65scfm의 유량을 가지는 압축기이다. 압축기와 Cryocooler의 조합은 1:1이었고 시험방법은 Cryocooler에 대한 GVT 자체규정에 따라 진행되었으며 밤과 낮 및 공장전체의 부하변동에 따른 냉각수 온도변화에 따른 펌프의 성능변화는 고려되지 않았다.

• Korean Journal of Environmental Biology
• /
• v.37 no.4
• /
• pp.493-502
• /
• 2019

Maize (Zea mays L.) is a C4-plant and one of the three major crops grown worldwide. Because of its high productivity, maize is considered as one of the most important food and feed stocks in the world. Recently, bioethanol from maize was predominantly generated in the USA and Brazil. Infection of maize by several diseases resulted in a huge disaster and prevented maize production. Downy mildew, caused by Peronosclerospora sorghi, is one of the most serious diseases of maize. Despite efforts to develop downy mildew-resistant cultivars or seed treatment with metalaxyl, downy mildew persists as a serious pathogen and is still prevalent in specific geographical locations. Analysis of soils infected with downy mildew and investigation of candidates associated with downy mildew resistance is an attractive method to overcome downy mildew damage in maize. In a previous study, we reported that maize chromosome 6 carries a possible candidate gene for downy mildew resistance. Using bioinformatics tools and RT-PCR analysis, five novel genes including bZIP, OFP transcription factor, and Ppr were identified as candidate genes associated with downy mildew resistance.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.5
• /
• pp.498-509
• /
• 2001

Collaborative systems allow users, who may be far removed from each other geographically, to do collaborative work such as 3D animation, computer game, and industrial design in a single virtual space. This paper describes our experience to develop a collaborative system framework that aims at expanding the some functions of a stand-alone visual modeling tool, called 3D Studio Max, into those of the distributed collaborative working environments. The paper mainly deals with design and implementation of a 3D shared-object Plug-In with respect to the 3D Studio Max Plug-In Software Development Kit in the distributed collaborative system developed by the authors. There are two major functions of the proposed scheme; one is to write 3D object-information to the shared memory after extracting it from the 3D Studio Max, the other is to create 3D objects after retrieving them from the shared memory. Also, the proposed scheme provides a simple way of storing 3D objects that have variable size, by means of shared memory which located in between the collaborative system clients and 3D studio Max. One of the remarkable virtures of the Plug-In is to reduce a considerable amount of shared object data which in consequence can mitigate the network overhead. This can be achieved by the fact that the system is able to extract a minimum amount of 3D objects that are required to transmit. Also, using the proposed scheme, user can facilitate 3D Studio Max into distributed collaborative working environments. This, in consequence give many benefits such as saving time as well as eliminating space constraints in the course of 3D modeling when we are under industrial design process.