• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.15-23
• /
• 2010

To reduce the vibration levels, additional dissipation elements such as dry friction dampers are sometimes integrated into bladed disk assembly. In this study, forced response analysis systems for a tuned bladed disk with friction dampers were developed and verified. For the efficient nonlinear vibration analysis, multi-harmonic balanced method and cyclic boundary condition were used. Also, mode shapes obtained using fictitious mass method were used to describe the motion of the structures with the concentrated structural nonlinearity, friction damper. The relative convergence of fictitious mass and traditional unconstrained modes were compared.

• Clean Technology
• /
• v.8 no.1
• /
• pp.45-51
• /
• 2002

The effect of outer edge serrations of a rotating disk in the electrostatic rotary atomizer has been experimentally investigated. In this study, the edge serrations of the rotating disk are designed and fabricated to maintain the ligament atomization for wide range of paint flow rates. A series of experiments have been conducted using optimally-designed or off-designed disks to investigate the surface characteristics, i.e., transfer efficiencies, thicknesses and bubbles. The optimally-designed disk has experimentally shown the best surface characteristics compared to other disks, especially for an existing non-serrated disk.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.3 s.40
• /
• pp.47-51
• /
• 2006

Recently, CMP (Chemical Mechanical Polishing) is one of very important processing in semiconductor technology because of large integration and application of design role. CMP is a planarization process of wafer surface using the chemical and mechanical reactions. One of the most important components of the CMP system is the polishing pad. During the CMP process, the pad itself becomes smoother and glazing. Therefore it is necessary to have a pad conditioning process to refresh the pad surface, to remove slurry debris and to supply the fresh slurry on the surface. A conditioning disk is used during the pad conditioning. There are diamonds on the surface of diamond disk to remove slurry debris and to polish pad surface slightly, so density, shape and size of diamond are very important factors. In this study, we characterized diamond disk with 9 kinds of sample.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.6
• /
• pp.359-366
• /
• 2014

This paper considered optimization method of appending a shape on a disc in an attempt to improve core functions, which are inherent in flow characteristics. The paper also verifies the optimization method of appendage shape with a Class 150 200A Butterfly valve. Then the design of experiment (DOE) with an orthogonal array is performed to analyze the effect of form parameters by grey relational analysis and analysis of mean (ANOM). And this study sets flow coefficient as an object functions for optimization, and the conventional disc model and the optimal appendage shape on disc model are compared by computational fluid analysis. The paper concludes that an optimal appendage shape on disc model achieves wider usability by a wider operating range.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.281-282
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.547-548
• /
• 2007

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.508-509
• /
• 2012

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.345-356
• /
• 2013

Numerical simulation on rock cutting by a TBM disc cutter was carried out using SPH (Smoothed Particle Hydrodynamics) code. AUTODYN3D, a commercial software program based on finite element method, was used in this study. The three-dimensional geometry of a disc cutter and a rock specimen were modeled by Lagrange and SPH code respectively. The numerical simulation was carried out for Hwangdeung granite for 10 different cutting conditions. The results of the numerical simulation, i.e. the relation between cutter force and failure behavior, had a good agreement with those from LCM test. The cutter forces measured in the numerical simulation had 10% deviation from the LCM test results. Moreover, the optimum cutter spacing was almost identical with the experimental results. These results indicate that SPH code can be successfully used had applicability for simulation on rock cutting by a TBM disc cutter. However, further study on Lagrange-SPH coupled modelling would be necessary to reduce the computation time.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.425-431
• /
• 2011

Thermal energy generated because of the friction between the disc and pad is transferred to both sides and causes thermal expansion of the material, which affects the contact pressure distribution. This phenomenon, which is called thermoelastic instability (TEI), is affected by the natural mode of a disc. TEI results in the formation of a hot spot and causes hot judder vibrations. In this study, three-dimensional analysis of the hot judder of a ventilated disc for automotives was performed by using the commercial finite element analysis program, SAMCEF. The intermediate processor based on a staggered approach was used to exchange the result data of the mechanical and thermal model. The hot spot was formed on the surface of the disc, and the number of hot spots was compared with the natural mode of the disc.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.101-101
• /
• 2009

압전 세라믹스는 진동, 변형, 압력 등의 기계적 에너지를 전기적 에너지로 혹은 전기적 에너지를 기계적 에너지로 변환시키는 소자로서의 기능을 가지며 조성의 개선 및 제조 기술의 진보가 계속되어 큰 관심을 받고 있다. 최근 audio의 고급화 및 자동차, 평면 TV, 고성능 통신기기, 디지털방송, 홈시어터 등 스피커의 성능이 크게 부각되면서 대기업에서부터 중소기업에 이르기까지 고성능 스피커의 개발에 박차를 가하고 있다. 압전 세라믹을 이용하여 음압을 변조하는 압전 스피커는 디스크 형상의 압전 프레이트를 단층 또는 다층으로 형성하여 기존의 마그네틱 스피커와는 차별되는 형태를 가진 스피커로서 응용하는 것이다. PSN-PZT계 조성을 개발하여 $d_{33}$, 전기기계결합계수($k_p$), 온도안정성 및 내구성 향상 및 특성향상을 위한 입경 조절 및 공정을 연구하고자 한다. 디스크 형태의 압전 세라믹을 이용하여 2, 3, 4 layer 이상의 멀티레이어 시편을 제작하였고, 여러 시편에서 크기 및 형상, 접합 방법 등에 따른 특성을 최적화하여 스피커의 특성을 향상 시키고자 한다.