• Smart Media Journal
• /
• v.9 no.3
• /
• pp.46-51
• /
• 2020

Pine wilt disease is one of the reasons that results in huge damage on pine trees in east Asia including Korea, Japan, and China, and early finding and removing the diseased trees is an efficient way to prevent the forest from wide spreading. This paper proposes a searching method of the damaged pine trees from wilt disease in ortho-images corrected from RGB images, which are captured by unmanned aviation vehicles. The proposed method constructs patch-based classifier using ResNet18 backbone network, classifies the RGB ortho-image patches, and make the results as a heat map. The heat map can be used to find the distribution of diseased pine trees, to show the trend of spreading disease, and to extract the RGB distribution of the diseased areas in the image. The classifier in the work shows 94.7% of accuracy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.159-159
• /
• 2020

하천환경조사는 하천의 전반적인 특성을 조사 분석하는 것으로 하천환경 조사결과는 하천관련사업의 기초자료로 사용된다. 하천환경조사의 기초조사에서는 현장답사를 통해 하천의 특성을 대략적으로 판단하고 하천 전구간의 물리적 구조와 식생의 분포, 중요 서식처 정보를 포함하는 RCS 지도(River Corridor Survey)를 작성한다. 기초조사를 위해서는 하천 전 구간에 대한 현장답사가 필요하기 때문에 많은 시간, 비용 그리고 인력이 필요하고, 육안 또는 사진을 통한 스케치로 이루어져 조사 결과가 정성적이고 작업자의 경험이나 능력에 따라 결과가 좌우된다는 한계가 있다. 따라서 하천환경조사를 좀 더 간편하고 과학적이며 경제적으로 조사하기 위해 최근 드론 영상을 이용한 조사 기술 개발에 대한 연구들이 증가하고 있다. 하지만 드론을 이용한 하천환경조사의 대부분은 RGB 영상을 이용하기 때문에 정밀한 하천환경 변화를 정량적으로 분석하는데 한계가 있다. 이를 극복하기 위한 대안으로 사람이 감지할 수 있는 빛의 영역 뿐 아니라 자외선과 적외선 영역의 분광특성을 이용하여 하천환경의 특성을 세밀하게 분류하는 것이 가능한 초분광센서를 드론에 탑재하여 하천환경을 조사하기 위한 기초 연구들이 시작되고 있다. 본 연구에서는 line scan 방식의 초분광센서를 드론에 탑재하여 초분광영상을 촬영하기 위한 드론 시스템을 구성하였고, 하나의 사진과 같이 초분광영상을 제작하기 위해 다양한 기하보정 기술을 적용하여 최적의 기하보정 방법을 제시하였다. 이를 위해 초분광영상의 기하보정은 각각의 초분광영상의 GCP와 대응점을 이용한 2차원 변환 방법 및 비선형 변환 방법을 적용하여 보정을 수행하였으며, 각 방법에 따른 정사보정 영상의 위치정확도를 검증하였다. 연구 결과 드론 기반의 초분광영상 촬영 및 기하 보정 방법을 제시하였다. 향후 하천환경조사 뿐만 아니라 다양한 분야의 원격탐사에 초분광영상을 활용하는데 도움이 될 것으로 기대한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.589-599
• /
• 2018

The land cover map has been produced by using satellite and aerial images. However, these two images have the limitations in spatial resolution, and it is difficult to acquire images of a area at desired time because of the influence of clouds. In addition, it is costly and time-consuming that mapping land cover map of a small area used by satellite and aerial images. This study used multispectral camera-based drone to acquire multi-temporal images for orthoimages generation. The efficiency of produced land cover map was evaluated using time series analysis. The results indicated that the proposed method can generated RGB orthoimage and multispectral orthoimage with RMSE (Root Mean Square Error) of ${\pm}10mm$, ${\pm}11mm$, ${\pm}26mm$ and ${\pm}28mm$, ${\pm}27mm$, ${\pm}47mm$ on X, Y, H respectively. The accuracy of the pixel-based and object-based land cover map was analyzed and the results showed that the accuracy and Kappa coefficient of object-based classification were higher than that of pixel-based classification, which were 93.75%, 92.42% on July, 92.50%, 91.20% on October, 92.92%, 91.77% on February, respectively. Moreover, the proposed method can accurately capture the quantitative area change of the object. In summary, the suggest study demonstrated the possibility and efficiency of using multispectral camera-based drone in production of land cover map.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.1
• /
• pp.19-28
• /
• 2019

Images captured by drone have the advantage of quickly constructing spatial information in small areas and are applied to fields that require quick decision making. If an image registration technique that can automatically register the drone image on the ortho-image with the ground coordinate system is applied, it can be used for various analyses. In this study, a methodology for geo-referencing of a single image and sequential images using drones was proposed even if they differ in spatio-temporal resolution using linear features and distinct points. Through the method using linear features, projective transformation parameters for the initial geo-referencing between images were determined, and then finally the geo-referencing of the image was performed through the template matching for distinct points that can be extracted from the images. Experimental results showed that the accuracy of the geo-referencing was high in an area where relief displacement of the terrain was not large. On the other hand, there were some errors in the quantitative aspect of the area where the change of the terrain was large. However, it was considered that the results of geo-referencing of the sequential images could be fully utilized for the qualitative analysis.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.79-95
• /
• 2021

This study evaluates the applicability of determining cadastral surveying results using drone photogrammetry during the phase of determining cadastral surveying results, which is the most important stage of cadastral surveying, but known to be hardly objective and highly probable in causing a subjective misjudgment or mistake made by a surveyor. In the experiment to analyze the accuracy of boundary point extraction from drone photogrammetry results, by comparing the coordinate area of 22 parcels extracted from 2D and 3D images with the coordinate area measured from ground survey, the difference could be quantified as RMSE of 1.44m² for 2D and 0.32m² for 3D images. In addition, experiments to evaluate the determination of cadastral surveying result based on drone photogrammetry survey showed the RMSE measure of 0.346m towards N direction and 0.296m towards Y direction in comparison to the existing surveying results through data investigation. Based on these experiments, it is judged that cadastral surveying result based on drone photogrammetry can be determined without needing to conduct a location survey with an accuracy of approximately 0.3m in the graphical area, which also leads to possibility of reducing individual errors if drones images are used along with ground survey by objectifying the process of cadastral surveying results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.249-249
• /
• 2016

무인항공기(UAV)는 군사적 목적으로 개발되었지만, 최근 다양한 분야에서 활용되고 있다. 수자원 관리를 위해서도 시대적 흐름에 따라 드론과 관련된 많은 연구가 진행되고 있다. 이수임 등(2015)은 UAV영상을 활용한 수변구조물의 DSM 생성 및 정확도 연구를 통해 지상 LIDAR와 같은 수준의 DSM 및 더욱 정확한 GCP 취득의 필요성을 제시했다. 이용창(2015)은 회전익 UAS 영상기반 고밀도 측점자료의 위치 정확도를 평가하였다. 이인수 등(2013)은 초경량 고정익무인항공기 사진측량기법의 정사영상 정확도 평가를 수행하였다. 또한 김민규 등(2010)은 풍수해 모니터링을 위한 UAV 적용성 분석을 실시하였고, 김홍래 등(2014)은 UAV를 활용한 감시정보정찰 임무분석 및 설계도구 개발을 위한 연구를 수행하였다. 상기와 같이 수자원 분야 활용을 위한 많은 연구가 보고 되고 있으나, 아직까지 드론 활용의 대부분은 항공영상 취득 및 분석기술 개발에 집중되어 있다. 본 연구에서는 무인항공기를 수재해 감시 및 관리 기술에 적용하기 위해 수행되었다. 수재해 감시 및 관리를 위한 방법으로 NIR(Near Infrared) 센서를 부착한 '재해관리용 드론'을 개발하고 현장실험을 수행하였다. 실험결과 NIR센서를 탑재한 드론은 수재해 관리에 매우 유용하게 활용될 수 있을 것으로 판단되었다.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.577-587
• /
• 2023

The utilization of crowdsourced spatial data has been actively researched; however, issues stemming from the uncertainty of data quality have been raised. In particular, when low-quality data is mixed into drone imagery datasets, it can degrade the quality of spatial information output. In order to address these problems, the study presents a methodology for automatically validating the geometric quality of crowdsourced imagery. Key quality factors such as spatial resolution, resolution variation, matching point reprojection error, and bundle adjustment results are utilized. To classify imagery suitable for spatial information generation, training and validation datasets are constructed, and machine learning is conducted using a radial basis function (RBF)-based support vector machine (SVM) model. The trained SVM model achieved a classification accuracy of 99.1%. To evaluate the effectiveness of the quality validation model, imagery sets before and after applying the model to drone imagery not used in training and validation are compared by generating orthoimages. The results confirm that the application of the quality validation model reduces various distortions that can be included in orthoimages and enhances object identifiability. The proposed quality validation methodology is expected to increase the utility of crowdsourced data in spatial information generation by automatically selecting high-quality data from the multitude of crowdsourced data with varying qualities.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.461-468
• /
• 2021

The role of drones is increasing day by day in smart construction that manages construction sites with 3D data in every life cycles. This is because both the digital surface model (DSM) and the orthoimage obtained for the construction site through the drone are made of point cloud data. This study aims to develop standard work types for drone use in order to systematically utilize drones in expressway construction sites. For the study, two expressway construction sites in Korea were set as test beds, and construction types applicable to drones were derived and verified through a pilot project. As a result of the study, three construction work types were developed for road planning, road design and maintenance, respectively, and in road construction, twenty-one detailed construction types were developed for five construction work types. It is expected that drones can be used more systematically not only at expressway construction sites, but also at other road construction sites by utilizing the "standard work type at expressway construction site for drone use" developed in this study.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.3
• /
• pp.49-58
• /
• 2016

Applications of drone in various fields have been increasing in recent years. Drone has great potential for forest management. Therefore this paper is using drone for forest damage areas. Forest damage areas is divided into caused by anthropogenic and occurs naturally, the possibility of disasters, such as slope sliding, slope failures and landslides, sediment runoff exists. Therefore, this research was to utilize the drone photogrammetry to perform the damage analysis of forest damage areas. Geometrical treatment processing results in Drone Photogrammetry, the plane position error RMSE was ${\pm}0.034m$, the elevation error RMSE was ${\pm}0.017m$. The plane position error of orthophoto RMSE was ${\pm}0.083m$, the elevation error of digital elevation model RMSE was ${\pm}0.085m$. In addition, It was possible to current state analysis of damage in forest damage areas of airborne LiDAR data of before forest damage and drone photogrammetry data of after forest damage. and application of drone photogrammetry for production base data for restoration and design in forest damage areas.

• Ecology and Resilient Infrastructure
• /
• v.8 no.1
• /
• pp.22-31
• /
• 2021

Surface image velocimetry (SIV) is a noncontact velocimetry technique based on images. Recently, studies have been conducted on surface velocity measurements using drones to measure a wide range of velocities and discharges. However, when measuring the surface velocity using a drone, reference points must be included in the image for image correction and the calculation of the ground sample distance, which limits the flight altitude and shooting area of the drone. A technique for calculating the surface velocity that does not require reference points must be developed to maximize spatial freedom, which is the advantage of velocity measurements using drone images. In this study, a technique for calculating the surface velocity that uses only the drone position and the specifications of the drone-mounted camera, without reference points, was developed. To verify the developed surface velocity calculation technique, surface velocities were calculated at the Andong River Experiment Center and then measured with a FlowTracker. The surface velocities measured by conventional SIV using reference points and those calculated by the developed SIV method without reference points were compared. The results confirmed an average difference of approximately 4.70% from the velocity obtained by the conventional SIV and approximately 4.60% from the velocity measured by FlowTracker. The proposed technique can accurately measure the surface velocity using a drone regardless of the flight altitude, shooting area, and analysis area.