• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.598-603
• /
• 2016

현대의 스포츠는 과학기술의 발전과 함께 성장하고 있고 골프종목 역시 재료역학적, 공기역학적 발전에 따라 비거리를 점점 늘려가고 있다. 하지만 현재까지의 비거리에 대한 연구는 골프공과 골프채의 재료의 변화와 딤플이 있는 골프공의 공기역학적 연구에 집중해 있었고 요즘에 들어서야 클럽헤드의 공기역학적 형상에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 골프 경기 중 가장 먼 비거리를 만들어 내는 골프채인 드라이버의 단순화된 2차원 클럽헤드 형상을 설정하고 항력을 줄일 여러 가지 방법을 적용하여 최소의 항력을 갖는 헤드 형상을 찾아보았다. 연구결과 $10.2^{\circ}$의 로프트를 갖는 클럽헤드는 chord 길이가 face 높이의 3.2배이고, trailing edge가 face의 중심보다 전체 face높이의 10% 아래에 있을 때 가장 적은 항력을 얻을 수 있었다. 결과적으로 이 형상과 기존형상의 스윙 속도 차는 약 2mph로 5yard의 비거리 차이를 가져온다.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.273-283
• /
• 2018

The purpose of this study is to analyze the optimum driver selection according to shaft intensity, shaft length and shaft weight that are determining factors of driver shot. To achieve the above purpose, the subject were participate with handicap zero 10 male pro golfer and mean score 90(handicap about 18) amateur 10 male golfer. The used club limited number 1 driver, we tested 24 driver which is shaft intensity, length, weight, total weight and swing weight. Dependent variable was strike ball speed, flying distance and head speed. The findings can be summarized as follows. First, There is a significantly difference in CPM. Ball speed, head speed and flying distance according to driver shaft intensity were found to be the best when CPM is 230<. Second, There is a significantly difference in shaft length. Ball speed, and head speed according to driver shaft length were found to be the best at 46 inch and flying distance were found to be the best at 45 inch. Third, There is not significantly difference in SW. Ball speed and flying distance according to driver shaft weight were found to be the best with 65g. In the case of head speed, it was the fastest with 50g shaft. Four, total variables were significantly difference between in pro and amateur golfer. In conclusion, there would be differences in individual physical condition but the best result was found with a driver of CPM 230<, shaft length 46inch, and shaft weight 65g.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.1-8
• /
• 2021

The purpose of this study was to analyze relationship between biomechancal factors and diver's distance during golf driver swing. Fifteen professional golfers were participated in as subject. Eight motion capture cameras(250 Hz), 2 force plates(1000 Hz), and Trackman were used to collect kinematic and kinetic datas. It was performed Pearson's correlation analysis using SPSS 24.0. The level of significance was at .05. Ball speed, club head speed, X-Factor, and ground reaction force were correlated on driving distance, However, smash factor and knee moment were not correlated on driving distnace. Ball speed, club head speed, X-Factor, and ground reaction force were effected to driving distance, but smash factor and knee moment were not effected to driving distance.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.2
• /
• pp.157-168
• /
• 2010

Many athletes have been using occlusal stabilization appliances to improve their performance. Few studies have examined the benefits of such an appliance in golf. We determined the effect of such appliances on the masticatory muscle activities and driving distances of professional golf players. The appliances were customized for each player and adjusted using a computerized device. The electromyographic muscle activities and driving distances with and without the appliance were measured and compared using the K7 Analyzer and the GolfAchiever II assembly. A paired t-test was used for statistical analysis. The muscle activities of the temporo-frontal and masseter muscles with the appliance were significantly more stable than those without the appliance, and the driving distances with the appliance were significantly different from those without it. Although there were intra-individual differences, professional golf players with temporomandibular disorders showed a greater improvement in performance.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.217-225
• /
• 2019

The aim of this study was determine to effect of shaft length and physical condition on golf driving performance(head speed, distance and direction). A range of drivers with length between 44 inch, 45 inch and 46 inch limit imposed by R&A rules limited were assembled and evaluated. Club head speed and drive distance and accuracy were determined three category 27 PGA pro golfer (handicaps 0, and height $170cm{\geq}171-175{\geq}175-180cm$) who golf performance. As a results follow : Head speed was significantly difference with 44, 45 between 46inch(p<.01). Distance was significantly difference with 44 between 46inch(p<.05). And direction was significantly difference with 44, 45inch between 46inch(p<.05). Head speed according to height was general similarity among shaft length in 170cm, 171-175cm. Distance were general similarity among shaft length in 170cm, and significantly difference with 44inch between 46inch in 171-175cm(p<.01), and significantly difference with 45inch between 46inch in 176-180cm(p<.05). Direction were significantly difference with 44inch between 46inch in 170cm(p<.05), but do not significantly difference with 44inch between 46inch in 176-180cm, 176-180cm. These results show that shaft length and height can affect head speed, distance and direction.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.2
• /
• pp.369-377
• /
• 2013

The purpose of this study was to explore which factors mostly influenced players' tour results employing tour skill factors provided by LPGA. For this study, Top 10 LPGA players' stats during 9 years (2004 2012) were used. As matter of fact, 10 variables were used like average score, top 10 finish, average putt, average birdies, average eagles, driving distance, driving accuracy, greens in regulation, sand saves, putts per GIR. and prize money earning. Stepwise multiple regression was conducted using SPSS win 20.0. Results indicated that the most influential tour skill factor to 9 seasons' results was average score, second influential factor was average putt, and the third factor was driving distance, and then top 10 finish was the fourth. Also on a year on year basis, 2004 was average score, 2005 was GIR., 2006 was average eagles, 2007 was top 10 finish, 2008 was average score, 2009 was average putt, 2010 were average score, GIR. and putt per GIR, 2011 was average birdies and 2012 was putt per GIR.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.38
• /
• pp.2-11
• /
• 2015

최근 저탄소 녹색성장 및 그린에너지 개발 정책에 힘입어 외연기관의 일종으로 Stirling Engine에 대한 관심이 고조되고 있다. 스털링엔진은 크게 알파, 베타, 감마형의 3가지 방식으로 구분되어지며 그 중 감마타입 엔진의 설계가 용이하고 다양한 적용이 가능하다는 특징이 있음에도 실린더와 크랭크간의 접속거리 문제로 인하여 알파, 베타 타입에 비하여 용적을 크게 차지하는 문제가 있었다. 이를 해결하기 위한 방안으로 주로 알파형에 적용하는 Yoke crank를 적용하면 용적을 줄임과 동시에 실린더의 병렬화에도 유리하다. 금번 연구에서는 기존의 Ross Yoke crank 설계기법에서 나아가 감마형 스털링엔진의 Yoke crank 설계를 더욱 단순하고 효율적으로 적용할 수 있는 방법을 제시한다.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.179-186
• /
• 2004

본 연구의 목적은 숙련된 골프선수들의 골프 스윙동작 시 상이한 무게중심 변환 형태가 존재하는지 그리고 만약 이 상이한 무게중심 변환 형태가 존재한다면 어떤 형태로 나타나는지를 알아보고자 하였다. 본 실험을 위해 13명의 남자 대학 엘리트 골프 선수들을 대상으로 드라이버를 이용한 스윙을 실시하게 하였다. 수직 지면 반력과 압력중심 이동 패턴을 측정하기 위해 지면반력기 2대와 스윙 동작 시 critical event 설정을 위해 1대의 고감도 비디오 카메라를 사용하였다. 또한 스윙 결과로 나타나는 비거리, 클럽헤드 속도를 측정하기 위해 스윙 분석기를 이용하였다. 피험자 간 상호 비교를 위해 측정된 수직 지면반력 성분은 몸무게를 이용하여 표준화하였고 압력중심은 어드레스시의 압력중심을 원점으로 재 계산하였다. 또한 임팩트 시 측정된 좌우 수직 지면반력 성분을 이용하여 두 가지의 상이한 스윙 스타일로 구분하였다. 연구결과 8명(62%)의 피험자에게서 좌측 수직력 성분이 상대적으로 높은 전족(FFS) 스타일임이 밝혀졌고 5명(38%)은 그 반대인 리버스(RFS) 스타일임이 밝혀졌다. 이 전족 스타일은 대부분의 골퍼들이 선호하고 또 그렇게 하여야만 한다고 믿고 있는 스윙방식이다. 이와 반대인 리버스 스타일은 코치들이 금기시 하는 스윙의 형태로서 초보자, 즉 비숙련 자에게만 나타나는 전형적인 스윙형태라고 인지되고 있다. 하지만 이 두 가지 스윙 스타일이 초보자가 아닌 숙련된 골프 선수들에게서도 실제 존재한다는 것이 본 실험 결과로 나타났다. 평균 압력중심 이동 패턴은 전후축 방향의 경우 RFS 스타일 그룹이 RFS 스타일 그룹에 비해 압력중심 이동이 크게 나타났고 좌우축의 경우에도 RFS 그룹이 FFS 그룹에 비해 압력중심 이동이 크게 나타났다. 특히 임팩트 시 압력중심의 위치가 FFS 그룹은 전족 근처에 있는 반면 RFS 그룹은 후족(rear foot)에 위치하여 두 스윙 스타일의 차이점을 분명하게 보여주었다. 따라서 비록 이 RFS 스타일이 대부분의 코칭 이론과는 상반되는 무게중심 이동 패턴을 보여주었지만 이 스윙 스타일이 잘못된 것이 아닌 실제 존재하는 하나의 스윙 스타일로 인식하여 스윙 지도 시 이에 알맞은 적절한 교습법을 마련해야 할 것이다.

• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.935-942
• /
• 2021

Involuntary movement of internal organs by respiration is a factor that greatly affects the results of radiotherapy and diagnosis. In this study, a moving phantom was fabricated to simulate the movement of an organ or a tumor according to respiration, and ¹⁸F-FDG PET/CT scan images were acquired under various respiratory simulating conditions to analyze the movement range of the tumor movement by respiration, the level of artifacts according to the size of the tumor and the maximum standardized uptake value (SUVmax). Based on Windows CE 6.0 as the operating system, using electric actuator, electric actuator positioning driver, and programmable logic controller (PLC), the position and speed control module was operated normally at a moving distance of 0-5 cm and 10, 15, and 20 reciprocations. For sphere diameters of 10, 13, 17, 22, 28, and 37 mm at a delay time of 100 minutes, 80.4%, 99.5%, 107.9%, 113.1%, 128.0%, and 124.8%, respectively were measured. When the moving distance was the same, the difference according to the respiratory rate was insignificant. When the number of breaths is 20 and the moving distance is 1 cm, 2 cm, 3 cm, and 5 cm, as the moving distance increased at the sphere diameters of 10, 13, 17, 22, 28, and 37 mm, the ability to distinguish images from smaller spheres deteriorated. When the moving distance is 5 cm compared to the still image, the maximum values of the standard intake coefficient were 18.0%, 23.7%, 29.3%, 38.4%, 49.0%, and 67.4% for sphere diameters of 10, 13, 17, 22, 28, and 37 mm, respectively.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.11-19
• /
• 2015

Objective : The purpose of this study was to analyze the correlation between physical factors (X-factor, X-factor stretch) and club factors (club speed, ball speed, club path, smash factor, vertical launch angle, spin rate, flight time, total length) during impact and it affect on the total distance of the ball during a golf driver swing. Background : There were not enough studies that analyzed the correlation between physical factors(X-factor, X-factor stretch) and club factors(club speed, ball speed, club path, smash factor, launch angle, spin rate, flight time, total length) during a purpose swing to increase total distance. Method : For this study, 9 right handed professional male golfers (KPGA) were chosen. The test subject group used their own drivers and each took a total of 10 swings. These swings consisted of 5 purpose swings to increase total distance and 5 normal swings. Results : The purpose swing to increase total distance showed larger physical factors(X-factor, X-factor stretch) compared to a normal swing however the results were not statistically significant. Total distance increased during a purpose swing as a result of ball and club speed. Conclusion : The results showed that club factors, ball speed and club speed contributed the most in affecting the total distance of the ball during a purpose swing.