• Weed & Turfgrass Science
• /
• v.3 no.2
• /
• pp.121-129
• /
• 2014

We investigated turfgrass diseases and inoculum density at nationwide turfgrass cultivation sites in year of 2013. Occurrences of large patch and rust disease appeared in September. Brown patch recorded in September to October at Namhea and Pythium blight disease occurred outbreaks in early July at Namhea site. Some sites in Namhea damaged 3% area of total cultivation field by Sclerotinia homoeocarp. In Daepyeong (Gyeongnam), Fairy ring and large patch were recorded. Severe takeall and fairy ring have been observed in Gochang-si. Multi-site in Cheongju-si, brown patch was observed in pandemic level. Interesting enough, a cool-season turfgrass cultivate sites in Pyeongtaek-si brown patch, leaf blast, summer patch, and Curvularia leaf spot were investigated during the surveys period. Inoculum densities (Rhizoctonia spp.) at turfgrass cultivations sites were increased as cumulatively in all survey sites. The investigation result indicated that the disease occurrence and pathogens are similar as diseases in golf courses.

• Journal of the Korean earth science society
• /
• v.23 no.6
• /
• pp.507-513
• /
• 2002

To delineate the relationship between dynamic elastic modulus and lithologies, suspension PS logging was applied to Yuseong granite, Paldang banded gneiss, and Sabuk sedimentary rock. P and S wave velocities were also measured for these lithologies. In addition, uniaxial strength and Poisson’s ratio were measured in a laboratory for Yuseong granite and Paldang banded gneiss. In laboratory measurements, P and S wave velocities in Paldang banded gneiss were higher than those in Yuseong granite whereas Poisson’s ratio in Paldang banded gneiss was lower than that in Yuseong granite. This implies that P and S wave velocities correlate reversely with Poisson’s ratio. The dynamic Young modulus obtained from suspension PS logging was high compared to the dynamic bulk modulus and the dynamic shear modulus.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.98-103
• /
• 2018

Many coating technologies have been developed so far to improve the corrosion resistance, strength, abrasion resistance and other surface properties of materials and equipment. Among them, the formation of CCO (CaCoO, then CCO) thin films has been studied and used in the electronic material field. One of the characteristics of CCO thin films is that it is resistant to high temperature heat. Particularly, the method of forming the CCO thin film is relatively simple, and it was judged that it could be introduced into the existing equipment. Therefore, in this study, an experiment and analysis were carried out to determine whether the coating of CCO thin films can be applied to hot dip galvanizing facilities. A CCO thin film was formed on the surface of STS304 base material and oxidized in a Zn fume atmosphere in a $650^{\circ}C$ furnace with an air atmosphere. Oxidation was carried out for 30 days, after which the shape of the CCO thin film was confirmed by SEM and its corrosivity was analyzed through a potentiodynamic polarization experiment.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.124-133
• /
• 2014

This study aims to track pedestrian behavior in urban linear tourist sites and to analyse their behavioral characteristics. For these purposes, this study has adopted the direct observation, a behavioral tracking methodology, and selected Chenggyecheon in Seoul as the study site, a representative site of urban regeneration. The main results of this study can be summarized as follows: the period of stay and movement distance of pedestrians in the study area are both short and most pedestrian activities, apart from walking, are of a passive nature, such as pitching pennies, reading signs, resting and the like. Spatial points of Chenggyecheon at which pedestrians have exhibited these behaviors during their stay are summarized as 30 points and classified into 3 types: landmarks, bridges and nodes. Further research that combines several tracking methods in terms of urban pedestrian behavior is needed.

• 보존과학연구
• /
• s.10
• /
• pp.1-40
• /
• 1989

Between 1976 and 1984 approximately 26.7 tons of Chinese coins were recovered from a shipwreck which was found at the seabed of the Shin an area in the south-western coast of the Korean peninsula. Elements, Cu, Pb, Sn, Fe, Sb, As, Zn, Ag, Ni, Co and Mn, of 54 pieces of the coins were determined by Inductively Coupled Plasma Atomic Emission Spectroscopy(ICP-AIS). The result shows that Ch, Pb, and Sn were found to be major elements roughly the coins with the ratio of 7 : 2 : 1, respectively. Trace elements were classified into 3 levels according to the avarage concentration : Fe,As and Sb(0.1-0.5%), Ag, Mi, Co and Zn(100-1000ppm) and Mn(10ppm). Some systematic tendencies are observed in the composition change with a function of their minting ages .The Wuzhu coins(오수전) from the Eastern Han dynasty(A.D.25-219 )are much more abundant in Cu than the coins of Tang dynasty(A.D.618-907) and later periods. Major element compositions of the Kai -tong Vuan-Bao(개통원보) coins from the Tang dynasty, were remarkably variable. In general, however, the Tang dynasty coins were much more abundant in Cu than the Song dynasty(A.S.S60-1279) coins. The amount of major elements Cu and Sn decreases while that of Pb in creasesby passage of age from the Bei Song dynasty(A.D.960-1127) to later Nam Song dynasty (A.D.1127-1279 ). It means that the quality of coins mere degraded. The amounts of trace elemends(Fe, As, Co, Hn) increases with the above age. High amounts of trace elements are supposed to be a reflection of immaturity of minting techniques or use of impurity-rich raw materials. The Jin dynasty(A.D.1125-1234) coins are found to be rich in Sn and thus contain Pb as the third component. It is quite different from the coins of the Song dynasty. The Zhi-dai Tong-Bao(지대통보) coins of the Yuan dynasty from A.0.1310 are much more abundant in Cu and Sn than those of the Nam Song dynasty .

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.117-117
• /
• 2017

오스테나이트계 스테인리스강의 기계적 특성 향상을 위해 열화학적 표면처리 방법으로 공정 후 재료의 변형이 없고 친환경적인 플라즈마 이온질화 기술이 널리 사용되고 있다. 특히 대략 $450^{\circ}C$이하에서 플라즈마 이온질화 처리 시 S상이라 불리는 expanded austenite 생성에 기인하여 내식성이 향상시키는 것으로 알려져 있다. 그러나 이전의 연구 결과 증류수, HCl, $H_2SO_4$ 등의 실험 용액에 따라 동일한 공정 온도에 대하여 다른 부식 특성을 나타냈으며, 내식성이 확보되는 온도 또한 다른 결과를 얻었다. 이처럼 적용 환경에 따라 다른 부식 경향을 보이고 있으나, 해양 환경에 사용될 해수에서의 부식 저항성에 대한 명확한 규명은 이루어지지 않고 있다. 따라서 본 연구는 해양환경에 보편화되어 있는 오스테나이크계 스테인리스강을 선정하여 다양한 온도에서 플라즈마 이온질화 처리 후 전기화학실험을 통해 온도 변화에 따른 부식 특성을 분석하였다. 플라즈마 이온질화는 25% 질소와 75% 수소의 비율로 $350{\sim}500^{\circ}C$의 온도 조건에서 10시간 동안 처리하였다. 플라즈마 이온질화 처리 후 마이크로 경도 계측과 X-선 회절(X-ray diffraction, XRD) 분석을 통해 온도 변화에 따른 금속 표면에 형성된 질화물의 기계적 조직학적 특성을 분석하였다. 또한 모재 및 다양한 온도에서 플라즈마 이온질화 처리된 재료에 대하여 $2{\times}2cm$(노출면적 $1cm^2$) 시편을 제작하여 전기화학적 부식 실험을 수행하여 부식 특성을 상호 비교 분석하였다. 전기화학적 부식 실험은 침적실험, 동전위 양극 음극 분극 실험을 실시하여 전위 변화에 따른 전류밀도 추이를 분석하여 부식 경향을 파악하였다. 그리고 전기화학 실험 후 손상부의 SEM 관찰과 손상 깊이 분석 및 무게 감소량 계측을 통한 종합적인 분석을 통해 온도-부식 경향의 상관관계를 규명하였다. 또한 분극 실험 후 타펠 외삽법으로 부식전위와 부식전류밀도를 구하여 미처리된 재료 및 플라즈마 이온질화 온도 변화에 따른 상대적 부식 속도를 예측하였다.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.18-25
• /
• 2011

In a manufacturing process of metal coins, surface defects of coins are manually detected. This paper describes an new method for detecting surface defects of metal coins on a moving conveyor belt using image processing. This method consists of multiple procedures: segmentation of a coin from the background, alignment of the coin to the model, projection of the aligned coin to the best eigen image space, and detection of defects by comparison of the projection error with an adaptive threshold. In these procedures, the alignement and the projection are newly developed in this paper for the detection of coin surface defects. For alignment, we use the histogram of the segmented coin, which converts two-dimensional image alignment to one-dimensional alignment. The projection reduces the intensity variation of the coin image caused by illumination and coin rotation change. For projection, we build multiple eigen image spaces and choose the best eigen space using estimated coin direction. Since each eigen space consists of a small number of eigen image vectors, we can implement the projection in real- time.

• Journal of Power System Engineering
• /
• v.13 no.3
• /
• pp.33-39
• /
• 2009

The aim of this study is to analyze the welds characteristics of the 205 stainless steel pipe for application of street pole material. The welds corrosion behavior of STS 205 pipe in 0.1 N sulphuric acid solution and 5% NaCl solution at room temperature was studied using both salt spray test and potentiodynamic polarization experiment. The morphology and components of corrosion products on surface of STS 205 pipe welds were investigated using SEM/EDX. The tensile strength and yield strength values of STS 205 plate were 715 MPa and 369 MPa respectively. The microvickers hardness values of STS 205 pipe welds were slightly increased than that of STS 304 pipe welds. Corrosion current density($I_{corr.}$) and critical current density($I_{crit.}$) values of STS 205 pipe welds in 3.5% NaCl solution were $1.89{\times}10^{-6}$ $A/cm^2$ and $15.8{\times}10 ^{-6}$ $A/cm^2$. The corrosion resistance of SIS 205 pipe welds was similar to its STS 304 pipe welds. The STS 205 and 304 pipe welds passive films were chromium oxide. Especially, the STS 205 pipe welds showed good corrosion resistance in 0.1 N sulphuric acid. This is attributed to the forming of protective chromium oxide on the surface of STS 205 pipe welds.

• Weed & Turfgrass Science
• /
• v.6 no.2
• /
• pp.157-164
• /
• 2017

Functional microorganisms decompose various organic matter by enzyme activity and suppress plant disease caused by pathogen. This study was conducted to isolate and select functional microorganisms with protein or carbohydrate degradation activities and antagonistic activity against turfgrass fungal pathogens for eco-friendly turfgrass management in golf course from compost containing livestock manure of poultry or swine. Totally 68 isolates collected from livestock manure compost strains were isolated and tested for their activities of amylase, protease and lipase and antagonistic activities against Rhizoctonia solani AG2-2, R. solani AG1-1, and Sclerotinia homoeocarpa. Among the isolates, 34 strains were selected as functional microbes showing higher activities of amylase and protease. Three isolates of ASC-14, ASC-18, and ASC-35 among the 34 strains were selected as antifungal bacterial strains repressing the above 3 turfgrass fungal pathogens. Analysis results of 16s rRNA gene sequence and phylogenic cluster indicated that ASC-14 and ASC-18 belonged to Bacillus amyloliquefaciens, while ASC-35 was B. subtilis, respectively.

• Journal of Life Science
• /
• v.15 no.2 s.69
• /
• pp.311-315
• /
• 2005

When paraquat was added to the bacterial membrane or mitochondrial suspension, the mixture turned dark blue, but the color was disappeared by aeration. The same phenomenon was seen when electrons were supplied to the paraquat. Blue color appeared from near the cathode, and then spreaded to whole transit system. Coloration was accelerated by addition of alkali, but the color was reduced by addition of acid or oxygen. Paraquat exhibited absorption at ultraviolet region by electron transfer at the concentrations as low as 1.0 mM which did not exert difficulty in showing color reaction. Paraquat caused the increase of the optical density at 340 nm by electron transit, and an aspect of that had a strong resemblance to NADH. The acute toxic action of paraquat seemes to depend on inhibition of energy metabolism cased by paraquat action of electron donor and acceptor.