• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1091-1094
• /
• 2000

본 논문은 위성 망에서 데이터 Traffic을 다루는 System을 제안하고, 성능을 분석한다. Traffic Source는 듀얼 리키 버켓(DLB : Dual Leaky Bucket)에 의해 일정하게 조정된 Traffic을 사용하며, 이러한 Traffic을 이용하여 제안한 시스템의 성능을 수학적으로 분석하고, 이를 시뮬레이션을 통해 검증한다. 제안한 시스템은 각 연결의 용량 변경 요구를 동적으로 허락하기 때문에 그 연결 자체의 초기화 설정 및 연결을 해제하는 다른 별도의 알고리즘이 필요 없어 기존의 회선 교환 시스템보다 효율적이다. 또한, 서비스 질을 결정적으로 보장함으로 망의 유연성 및 신뢰성을 높인다. 이러한 분석 결과는 앞으로 회선 교환 System에서 Protocol의 설계 및 구현 시 유용하게 사용될 수 있을 것으로 생각된다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.169-171
• /
• 1998

본 논문에서는 성능이 서로 다른 워크스테이션들을 효과적으로 사용하기 위한 동적인 Load Balancing 방식을 제안한다. 각 워크스테이션의 수행시간에 따라서 load 의양이 결정되며 각 워크스테이션의 성능을 사전에 알아야 할 필요가 없는 방식이다. 이를 Ethernet으로 연결된 두 개의 워크스테이션에서 실험하여 그 성능을 비교 평가한다.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.169-176
• /
• 2005

This paper introduces the dynamic control of acceleration lanes at freeway-ramp junctions. The feasibility of operation with flexible length of acceleration lane was tested with most possible traffic conditions. The operational qualify was also evaluated using average speed and total thru-put at both ramp section and freeway section. A CORSIM microscopic simulation model was used to evaluate the operation quality with a variety or volume conditions and three acceleration lanes, each representing different length categories. In addition, tollgate O-D data including travel times were obtained for two sections on the Gyeong-bu Freeway where an effective merging distance has been largely reduced. Its effect was analyzed and compared to the simulation results. Finally, the effects of acceleration lane are discussed and operational improvement at junctions is presented as research findings.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.5 s.78
• /
• pp.537-547
• /
• 2005

MABB(Editor's note: Please spell out "MABB" upon first mention)is a new structural type of arch that connects arch ribs and stiffened girders with two internal arches. In this study, the static and dynamic behavior of MABB were analyzed in comparison with those of conventional arches for the investigation of the structural effect of MABB on moving loads. For the purpose of surveying the effect of internal arches on the dynamic behavior of structure, natural frequency and natural vibration mode were investigated and the static and dynamic behavior were analyzed by the method of idealizing train loads as traveling loads consisting of a group of concentrated loads. From the results, the following conclusions were known. First, it is concluded that with MABB, decreasing the section of stiffened girders is possible as compared with conventional arches because the increase of stiffness by internal arches is larger than that of the mass of internal arches. Second, MABB has the advantage of assurance of stability of dynamic behavior because the dynamic behavior of MABB on moving loads is usually investigated in a more stable way than that of conventional arches.

• Journal of Ocean Engineering and Technology
• /
• v.5 no.1
• /
• pp.45-54
• /
• 1991

본 논문은 케이블-ROV 시스템의 동적거동 규명을 위한 효과적인 해석방법에 대한 고찰이다. 해석방법에 대하여 일차적으로 연구하고 해석방법에 따른 소프트웨어를 개발하여 3차원 케이블-ROV 시스템 거동을 수치적으로 해석하였으며 같은 모델에 대한 거동을 실제 실험을 통하여 연구분석 하였다. 수치해석과 실험결과를 비교 검토하였고 여러가지 관련 문제점에 대해서도 연구하였다.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.99-108
• /
• 1993

시멘트 페이스트의 비선형적 점탄성 거동을 연구하기 위해 동적인 전단 유동 시험 이 수행되었다. 전단응력과 전단변형 또는 전단변형율간의 관계를 보여주는 히스테리시스 곡선을 얻기 위하여 전단응력이 연속적으로 측정되었다. 이는 기존의 주파수 혹은 변형의 증가에 의한 실험(frequency or strain sweep experiment)과는 달리 저자에 의해 수정된 점 성계(HAAKE Model RV20/RC20/CV20N)의 조정프로그램을 이용하여 수행되었다. 동적 전 단유동시험에서 얻어진 히스테리시스곡선은 시멘트 페이스트가 전단변형을 받는 동안 선형 탄성, 입자간 연결고리의 파괴 및 점성유체 거동을 보여준다. 측정된 항복전단응력은 전단변 형율의 증가에 따라 파우어함수(Power low equation)에 의해 증가함을 보여준다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.1
• /
• pp.79-88
• /
• 1997

Very stiff floor system in a residential-commercial building causes some problems in the numerical analysis procedure due to significant difference in stiffness with adjacent elements. Static analysis of structure with a stiff transfer-floor can be performed approximately in two steps for upper and lower parts for the structure. However, it is impossible to perform dynamic analysis in two steps with separate models. An efficient method for dynamic analysis of a structure with a right floor system is proposd in this study. The matrix condensation technique is employed to reduce the degree of freedom for upper and lower parts of the structure and a beam elements with rigid bodies at both ends are introduce to model the rigid floor system. Efficiency and accuracy of the proposed method are verified through analysis of several example structures.

• Journal of Korea Multimedia Society
• /
• v.12 no.7
• /
• pp.1022-1031
• /
• 2009

In this paper, we propose a researcher modeling technique based on ontology and construct social network for researchers using diverse relational properties. User ontology schema is created by extending the existing HR-XML model for a researcher model. User ontology schema and instance are created by OWL. We compose social network model for efficient cooperation between researchers using static relational properties such as educational background and dynamic relational properties such as co-authors and co-workers, etc. Closeness has direction because researcher network is differently configured by the researchers. We define inferencing rules using SWRL and inference ontology rules using racer inference machine to compose direct relationships between researchers. The proposed model for researchers can be applied to the cooperation model for researchers by retrieving common expert group dynamically.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.85-93
• /
• 2010

This paper proposes a new dynamic hardware allocation and binding algorithm of a simultaneous allocation and binding for SOC design automation. The proposed algorithm works on scheduled input graph and simultaneously allocates binds functional units, interconnections and registers by considering interdependency between operations and storage elements in each control step, in order to share registers and interconnections connected to functional units, as much as possible. This paper shows the effectiveness of the proposed algorithm by comparing experiments to determine number of function unit in advance or by comparing separated executing allocation and binding of existing system.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.12
• /
• pp.891-898
• /
• 2009

This paper suggests producer/consumer-based Data Binder enabling applications and biomedical devices developed by mutually different vendors to transfer data dynamically. Data Binder is implemented as a bundle of OSGi platform providing component-based programming model and service-oriented operation architecture. Data Binder complements the disadvantage of OSGi WireAdmin service enabling static data delivery between a producer and a consumer of data. Data Binder normalizes an application requirement as an application descriptor and a device capability as a device descriptor so that it enables dynamic data delivery by making data producer/consumer pair in runtime. Therefore, Data Binder can be used as a connection management of a data link between a data producer and a data consumer in sensor-based application development. The object of this paper is to provide the facility of the healthcare service development by separating a data producer such as a biomedical device from a data consumer such as a healthcare application.