• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.18-26
• /
• 2015

Measuring the heart rate during exercise is important to properly control the amount of exercise. With the recent advent of smart device usage, there is a dramatic increase in interest in devices for the real-time measurement of the heart rate during exercise. During intensive exercise, accurate heart rate estimation from wrist-type photoplethysmography (PPG) signals is a very difficult problem due to motion artifact (MA). In this study, we propose an efficient algorithm for an accurate estimation of the heart rate from wrist-type PPG signals. For the twelve data sets, the proposed algorithm achieves the average absolute error of 1.38 beat per minute (BPM) and the Pearson correlation between the estimates and the ground-truth of heart rate was 0.9922. The proposed algorithm presents the strengths in an accurate estimation together with a fast computation speed, which is attractive in application to wearable devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.262-271
• /
• 2004

There are channel errors when video data are transmitted between encoder and decoder. These channel errors would make decoded image incorrect, so it is very important to detect and recover channel errors. This paper proposes a method of error detection and recovery by hiding specific information into video bitstream using fragile watermark and checking it later. The proposed method requires no additional bits into compressed bitstream since it embeds a user-specific data pattern in the least significant bits of LEVELs in VLC codewords. The decoder can extract the information to check whether the received bitstream has an error or not. We also propose to use this method to embed essential data such as motion vectors that can be used for error recovery. The proposed method can detect corrupted MBs that usually escape the conventional syntax-based error detection scheme. This proposed method is quite simple and of low complexity. So the method can be applied to multimedia communication system in low bitrate wireless channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9C
• /
• pp.1258-1268
• /
• 2004

We propose a new fast, algorithm which is used for detecting frontal face in the frequency domain based on human skin-color using OCT coefficient of dynamic image compression and skin color information. The region where each pixel has a value of skin-color were extracted from U and V value based on DCT coefficient obtained in the process of Image compression using skin-color map in the Y, U, V color space A morphological filter and labeling method are used to eliminate noise in the resulting image We propose the algorithm to detect fastly human face that estimate the directional feature and variance of luminance block of human skin-color Then Extraction of face was completed adaptively on both background have the object analogous to skin-color and background is simple in the proposed algorithm The performance of face detection algorithm is illustrated by some simulation results earned out on various races We confined that a success rate of 94 % was achieved from the experimental results.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.5
• /
• pp.441-446
• /
• 2009

This paper proposes an automatic indexing algorithm of golf video using audio information. In the proposed algorithm, the input audio stream is demultiplexed into the stream of video and audio. By means of Adaboost-cascade classifier, the continuous audio stream is classified into announcer's speech segment recorded in studio, music segment accompanied with players' names on TV screen, reaction segment of audience according to the play, reporter's speech segment with field background, filed noise segment like wind or waves. And golf swing sound including drive shot, iron shot, and putting shot is detected by the method of impulse onset detection and modulation spectrum verification. The detected swing and applause are used effectively to index action or highlight unit. Compared with video based semantic analysis, main advantage of the proposed system is its small computation requirement so that it facilitates to apply the technology to embedded consumer electronic devices for fast browsing.

• Korean Journal of Optics and Photonics
• /
• v.21 no.1
• /
• pp.21-25
• /
• 2010

In this paper, in order to enhance the image reconstruction performance of white light scanning interferometry(WLI), we demonstrate the scattered point noise filtering performance of post-processing methods. Median filtering is similar to using an averaging filter. Because the median value is less sensitive than the mean to extreme values, the median filter can remove the scattered point noise from a height-map without significantly reducing the sharpness of the image. In several specific cases, however, the median filter can't remove the scattered point noise. Therefore, we propose a comparative mean filter that uses order-statistic filtering and the mean of the neighborhood pixels. The performance is demonstrated by measuring an array of metal solder balls fabricated on PCB. The proposed method reduced the noise pixels by 4.4 percent.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.6 no.1
• /
• pp.27-31
• /
• 1981

This paper deals with the variation of the effective detectability factor fo logarithmic receiver in noise interference environment. The computed results as a function of maximum detection range and jamming range were compared with the effective detectability factor for linear receiver. Even though the logarithmic receiver has a wide dynamic characteristics, it is found that the effective detectability factor being reduced about 15% than the linear receiver at 100 KM range.

• Journal of the Korean Magnetics Society
• /
• v.6 no.1
• /
• pp.7-14
• /
• 1996

According to demands of high density and wide band magnetic recording systems, a composite MIG head was developed. This head has the sufficient performance for use of a SD VCR : its characteristics are a good recoding performance, a low rubbing noise, a good frequency dependence of efficiency, and a good compatibility with ME tape. In a SD VCR system, the C/N value of a composite MIG head at 20.92MHz was 51 dB.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.7
• /
• pp.33-41
• /
• 1994

A single channel adaptive noise canceling (ANC) technique with a recursive time delay estimator (RTDE) is presented for removing effects of additive noise on the speech signal. While the conventional method makes a reference signal for the adaptive filter using the pitch estimated on a frame basis from the input speech, the proposed method makes the reference signal using the delay estimated recursively on a sample-by-sample basis. As the RTDEs, the recursion formulae of autocorrelation function (ACF) and average magnitude difference function (AMDF) are derived. The normalized least mean square (NLMS) and recursive least square (RLS) algorithms are applied for adaptation of filter coefficients. Experimental results with noisy speech demonstrate that the proposed method improves the perceived speech quality as well as the signal-to-noise ratio and cepstral distance when compared with the conventional method.

• Journal of the Korea Computer Industry Society
• /
• v.8 no.1
• /
• pp.57-64
• /
• 2007

In the paper, considers the design of a detection system, consisting of n identical detectors, to process the sum of spatially invariant signal fields $S_\jmath(t)$, an additive, homogeneous, spatially isotropic (in the array plane x). covariance_separable, and zero_mean Gaussian random noise field n(t, x). consisting of arrey receivers for use in optical communication through optimum turbulence atmosphers and covriance_circuit, staistical analysis through detection the maximum gain are compared with analysis theoretical analysis theoretical value and get through experimental measured value, as well the measured valus are confirmed to agreement joint Gaussian theoretical curves.

• Journal of KSNVE
• /
• v.6 no.5
• /
• pp.679-684
• /
• 1996

The Instrumental Variable Method(IVM), modified from least square algorithm, is applied to parameter identification of a noise contaminated bearing test rig. The signal to noise ratio included in Frequency Response Function(FRF) can cause significant errors in parameter identification. Therefore, among several candidates of parameter identification method, results of the applied IVM were compared with noise-contaminated least square method. This study shows that the noise-contaminated least square method can have indonsistent accuracy depending on the degree of noise level, while the IVM has robuster performance to signal to noise ratio than least square method.