• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.181.1-181.1
• /
• 2015

용액 공정을 이용한 Resistive random access memory (ReRAM)은 간단한 공정 과정, 대면적화, 저렴한 가격 등의 장점으로 인해 큰 관심을 받고 있으며, HfOx, TiOx, AlOx 등의 산화물이 ReRAM 절연 막으로 주로 연구되고 있다. 더 나아가 최근에는 organic 물질을 메모리 소자로 사용한 연구가 보고되고 있다. 이는 경제적이며, wearable 또는 flexible system에 적용이 용이하다. 그럼에도 불구하고, organic 물질을 갖는 메모리 소자는 기존의 산화물 소자에 비해 열에 취약하며 전기적인 특성과 신뢰성이 우수하지 못하다는 단점을 가지고 있다. 이를 위한 방안으로 본 연구에서는 AlOx - polymethylmethacrylate (PMMA) blended thin film ReRAM을 제안하였다. 이는 organic물질의 전기적 특성을 개선시킬 뿐 아니라, inorganic 물질을 wearable 소자에 적용했을 때 발생하는 crack과 같은 기계적 물리적 결함을 해결할 수 있는 새로운 방법이다. 먼저, P-type Si 위에 습식산화를 통하여 SiO2 300 nm 성장시킨 기판을 사용하여 electron beam evaporation으로 10 nm의 Ti, 100 nm의 Pt 층을 차례로 증착하였다. 그리고 PMMA 용액과 AlOx 용액을 초음파를 이용하여 혼합한 뒤, 이 용액을 Pt 하부 전극 상에서 spin coating방법으로 1000 rpm 10초, 5000 rpm 30초의 조건으로 증착하였다. Solvent 및 불순물 제거를 위하여 150, 180, $210^{\circ}C$의 온도로 30 분 동안 열처리를 진행하였고, shadow mask를 이용하여 상부 전극인 Ti를 sputtering 방식으로 100 nm 증착하였다. 150, 180, $210^{\circ}C$로 각각 열처리한 AlOx - PMMA blended ReRAM의 전기적 특성은 HP 4156B semiconductor parameter analyzer를 이용하여 측정하였다. 측정 결과 제작된 소자 전부에서 2 V이하의 낮은 동작전압, 안정된 DC endurance (>150cycles), 102 이상의 높은 on/off ratio를 확인하였고, 그 중 $180^{\circ}C$에서 열처리한 ReRAM은 더 높은 on/off ratio를 갖는 것을 확인하였다. 결론적으로 baking 온도를 최적화하였으며 AlOx - PMMA blended film ReRAM의 우수한 메모리 특성을 확인하였다. AlOx-PMMA blended film ReRAM은 organic과 inorganic의 장점을 갖는 wearable 및 system용 비휘발성 메모리소자에 적용이 가능한 경제적인 기술로 판단된다.

• Journal of Broadcast Engineering
• /
• v.11 no.3 s.32
• /
• pp.320-325
• /
• 2006

An image is partitioned into non-overlapping $8{\times}8$ blocks fer JPEG compression. A scan order converter is placed before the JPEG encoder to provide $8{\times}8$ blocks from the pixels in raster scan order. In general, its architecture requires two line memories for storing eight lines separately to allow the concurrent memory access by both the camera and JPEG processors. Although such architecture is simple to be implemented, it can be inefficient due to too excessive memory requirement as the image resolution increases. However, no deterministic addressing equation has been developed for scan conversion. In this paper, an effective memory addressing algorithm is proposed that can be devised only by adders and subtracters to implement a scan converter based on the single line memory.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.842-848
• /
• 2011

A fabricated hybrid control board using multi-communication is designed with a low power 8-bit microcontroller, ATxmega128A1. The microcontroller consists of 8 UART (Universal asynchronous receiver/transmitter) ports, 2 kbytes EEPROM, 128 kbytes flash memory, 8 kbytes SRAM. The 8 URAT ports are used for a multi-communication modem, a GPS module, etc. The EEPROM is used for saving a configuration for running programs, and the flash memory of 128 kbytes is used for storing a F/W (Firm Ware), and the 8 kbytes SRAM is used for stack and for storing memory of global variables while running programs. If we use the multi-communication of CDMA, TRS and RF to remotely control Aid to Navigation, it is able to remove the communication shadow area. Even though there is a shadow area for an individual communication method, we can select an optimal communication method. The compatibility of data has been enhanced as using of same data frame per communication device. For the test, 8640 of data have been collected from each buoy during 30 days in every 5 minutes and the receiving rate of the data has shown more than 85 %.

• Journal of Sensor Science and Technology
• /
• v.10 no.3
• /
• pp.187-195
• /
• 2001

A wireless telemetry measurement system, using ISFETs, was developed for environmental monitoring applications, industrial processes, medical treatments and so on. This system is composed of the measurement part located at remote site and a personal computer(PC) which control whole instrument process. The measurement part transmits measured data to the PC by RF transceiver, and transmitted data are analyzed and handled in the PC. Proposed system utilizing time division multiplexing for the transmission of 3channel ISFET signal. The measurement part has an identification number(ID) so that the PC controls many measurement parts separately. Experiments were performed using pH-ISFETs, and the implemented system operates well within designed specification and accuracy of 0.1 pH.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.4
• /
• pp.150-157
• /
• 2008

This paper presents a design and implementation of realtime video player that operates on a tiled-display system consisting of multiple PCs to provide a very large and high resolution display. In the proposed system, the master process transmits a compressed video stream to multiple PCs using UDP multicast. All slaves(PC) receive the same video stream, decompress, clip their designated areas from the decompressed video frame, and display it to their displays while being synchronized with each other. A simple synchronization mechanism based on the H/W clock of each slave is proposed to avoid the skew between the tiles of the display, and a flow-control mechanism based on the bit-rate of the video stream and a pre-buffering scheme are proposed to prevent the jitter The proposed system is implemented with Microsoft DirectX filter technology in order to decouple the video/audio codec from the player.

• Journal of Korean Physical Therapy Science
• /
• v.12 no.4
• /
• pp.25-31
• /
• 2005

이 사례연구는 2002년 10월 15일 칼에 의한 좌상으로 경추 3-4번의 불완전 척수손상을 입은 25세의 남자 환자가 최초 병원에서 2002년 12월 한달 간의 치료를 마친 후, 2003년 1월 3일부터 4월 28일까지 태릉에 위치한 N 재활센터에서 주 5회 2시간의 자세조절 훈련, 심폐지구력 훈련, 웨이트 훈련, 스포츠(축구, 소프트 볼), 여가활동(등산)의 프로그램을 적용하여 척추손상 환자의 사회적응을 돕기위한 재활 프로그램의 다양화를 꾀하기 위한 기초 선행 작업으로 시작되었다. 신체능력을 평가하기 위한 측정도구는 관절가동범위(Range of Motion), 수동근력검사(Muscle Manual Test), 경직(Spasticity), 신체체력(Physical Fitness), 발란스(Balance: one leg stand), 상대적인 등속성 하지근력(Isokinetic Muscle Strength) 그리고 신체조성(Body Composition)로 하였다. 재활기간을 통해 처음 시작 일자에서 45일 간격으로 3차례의 측정을(1월 3일부터 4월 28일까지 실시하였다) 실시하였다. 최초 환자의 상태는 부분적으로 일상생활의 도움을 받아야 하는 상태로 동작을 시작하려 할 때 경직이 발생되어 옷을 입고 벗기, 신발 신고 벗기, 운전, 식사, 보행과 계단보행, 경사보행에서 보조자의 도움이 필요했으며, 작은 물건 잡기와 글씨쓰기, 타이핑 작업은 불가능 한 상태였다. 또한 스포츠 활동과 여가활동 역시 불가능 한 상태였다. 3달 15일간의 기간 동안 환자는 복학을 준비하기 위해 적극적으로 치료에 임했으며, 결과는 다음과 같았다. 신체조성은 재활 훈련을 통해 체중, 체지방율(%), 복부지방율(WHR)의 많은 감소를 가져왔다. 경직을 측정하는 Ashworth Scale은 정상에 가깝게 감소하였다. 관절가동범위는 고관절, 무릎, 발목에서 모두 증가하였다. 수동근력검사(0-9)는 많은 향상을 가져왔다. 신체체력능력 항목에서 근지구력의 윗몸일으키기와 팔굽히기, 악근력, 유연성으로 앉아 체간 숙이기, 민첩성으로 사이드 스텝, 순발력의 서전트는 모두 크게 향상되었다. 환자의 일상능력에서도 옷을 입고 벗기, 신발 신고 벗기, 운전, 식사, 보행과 계단보행, 경사보행에서 보조자의 도움이 필요없었으며, 타이핑 작업은 5손가락을 모두 사용하지는 않았지만, 1분에 80타로 큰 향상을 가져왔다. 또한 축구와 소프트볼, 등산을 달에 1회 정도 실시하여 약간의 도움만으로 가능하게 되었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.58-66
• /
• 2009

In this paper, vector control to applied disturbance offset feedforward loop control for changing disturbances with various mechanical parameter is suggested. The proposed system estimate load torque based on induction motor torque using minimum diemension state observer. Because speed controller using state observer is used on condition of feedforward loop fur a torque, the robust speed control system realized. In this study, the proposed paper does to heighten reliability of system by presuming and use the speed by voltage and current that is detected without speed sensor. To prove the propriety of this paper, the various simulation carried out adequacy using a Matlab Simulink, and at the same time real system is made, using a ADMC300 digital signal processor, so it is proved. As the experimental result of embodying the system, the robust system is realized.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.321-327
• /
• 2003

As the continuous casting process is to product slab with high temperature liquid steel, the main role of strand driven roll is to withdraw slab from mold as operator set up casting speed pattern. The strand driven roll in old cast machine is controlled casting speed only. Due to inaccuracies in drive setting up, varying roll diameters, bulging in the product, withdrawal force was distributed irregularly. As a result, because of horizontal crack in slab comer, high casting speed can't be achieved. In this paper, the correlation between the distribution of withdrawal force and slab quality is investigated and the new control algorithm which can be distributed regularly the withdrawal force of strand driven roll is proposed. The principle of proposed algorithm is not to control motor torque directly but to control motor speed reference according to sharing ratio of withdrawal force which is set up in high level controller. The proposed algorithm implemented in POSCO Kwangyang 1-4 continuous casting plant.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.6
• /
• pp.1390-1403
• /
• 1998

Database sharing system (DSS) refers to a system for high performance transaction processing. In DSS, the processing nodes are locally coupled via a high speed network and share a common database at the disk level. Each node has a local memory, a separate copy of operating system, and a DB'\fS. To reduce the number of disk accesses, the node caches database pages in its local memory buffer. However, since multiple nodes may be simultaneously cached a page, cache consistency must be cnsured so that every node can always access the'latest version of pages. In this paper, we propose efficient cache consistency schemes in DSS, where the database is logically partitioned using primary copy authority to reduce locking overhead, The proposed schemes can improve performance by reducing the disk access overhead and the message overhead due to maintaining cache consistency, Furthermore, they can show good performance when database workloads are varied dynamically.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.71-78
• /
• 2008

In this paper, we implement the H.264/AVC baseline decoder by hardware-software partitioning under the embedded Linux Kernel 2.4.26 and the FPGA-based target board with ARM926EJ-S core. We design several IPs for the time-demanding blocks, such as motion compensation, deblocking filter, and YUV-to-RGB and they are communicated with the host through the AMBA bus protocol. We also try to minimize the number of memory accesses between IPs and the reference software (JM 11.0) which is ported in the embedded Linux. The proposed IPs and the system have been designed and verified in several stages. The proposed system decodes the QCIF sample video at 2 frame per second when 24MHz of system clock is running and we expect the bitter performance if the proposed system is designed with ASIC.