• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.2
• /
• pp.41-47
• /
• 2024

In this study, the resistance characteristics of semi-insulating SiC single crystals grown using the PVT method were investigated, considering the purity level of SiC source powders used in PVT growth and the cooling procedure after crystal growth. Two β-SiC powders with different purities were employed, and the cooling rate after growth was adjusted to achieve various resistance values. 4-inch HPSI-SiC ingots were grown using the PVT method, utilizing SiC powders with low nitrogen concentration and relatively high nitrogen concentration. These ingots were then subjected to different cooling procedures to modify the cooling rate. Transmission/absorption spectra and crystal quality of the grown crystals were analyzed through UV/VIs/NIR spectroscopy and X-ray rocking curve analysis, respectively. Additionally, electrical properties were investigated through non-contact resistivity analysis to identify the dominant factors influencing resistivity properties.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.285-291
• /
• 2015

Exposure to cold sea water can be life-threatening to the drowned individual. Although appropriate life jacket can be usually be provided for the buoyance at the drowning accident, heat loss can make the drowned individual experience the hypothermia. Inflatable life jackets filled with inflatable air pocket can increase the thermal protection as well as the buoyancy force. Because it is important to know how the human body behaves unde the different life jacket, present study compares the thermal insulation capacity of solid type life jacket with that of inflatable life jacket. In order to represent the insulation capacity of life jacket, thermal resistance is estimated based on the assumption of steady-state. Also, a transient three-dimensional thermal distribution of the thigh is analyzed by using finite element method implementing the Pennes bioheat equation. The finite element model is a segmental, multi-layered representation of the body section which considers the heat conduction within tissue, bone, fat and local blood flow rate.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.3
• /
• pp.45-50
• /
• 1999

Copper has been widely used for the electronic parts, and especially spot welded one for the leads of condenser or resistor. However, copper is generally hard to be spot welded because of its low electrical resistivity. For this experiment, Sn-37%Pb solder which has relatively higher resistivity was coated on the Cu-sheet to improve the spot weldability of copper. As the experimental variables welding pressure was varied from 100 to 200kgf, welding time from 20 to 50ms, and welding current from 100 to 2500A. Experimental results showed that the solder coated Cu-sheet can be spot welded under the conditions of 400~2200A welding current, 100~200kgf pressure and 20-50ms welding time. The tensile shear strength of the spot welded joint increased with welding current up to the critical current, and after the critical value decreased with current.

• The Journal of Information Systems
• /
• v.28 no.3
• /
• pp.59-81
• /
• 2019

Purpose The purpose of this study is to investigate the resistance factors interfering the acceptance factors of the mobile easy remittance service focusing on the switching cost and the innovation resistance model. Design/methodology/approach This study focuses on revealing the resistance factors of the mobile easy remittance service acceptance. The resistance factor is designed consisting both consumer characteristics and service characteristics in the Innovation Resistance Model. Furthermore, the effect of resistance factors on the innovation resistance and acceptance intentions were detected by moderating the switching cost. Findings According to the empirical analysis result, this study investigated the effect of resistance factors on innovation resistance and acceptance intention for the mobile easy remittance service. The results of this study as follows; (1) The consumer's inherent innovativeness did not significantly affect the innovation resistance and acceptance intention. (2) The attitude toward existing services and complexity significantly affected innovation resistance in direct manner, thus affecting the acceptance intention in indirect manner. (3) The perceived usefulness significantly affected both the innovation resistance and the acceptance intention in direct manner. (4) The perceived risk only effected the acceptance intention. (5) The switching cost had a moderating effect on the innovation resistance and acceptance intention.

• Journal of Global Scholars of Marketing Science
• /
• v.15 no.3
• /
• pp.211-231
• /
• 2005

It is important for marketers to understand both individual resistance and group resistance in order to successfully bring innovations into global markets. We suggest that consumers resist innovations as individuals and as members of a group and that they do this in different ways at different stages of decision-making. The individual resistance begins with forms of initial resistance, develops into emergent resistance and mature or belated resistance at the individual level. In addition, personal moral standards can influence decision making in relation to the adoption of innovations. Individual resistance is sometimes accompanied by or evolves into group resistance. We introduce a framework for thinking about consumer resistance to innovations that sees it as a consequence of social identity, which has functions for the individual, the group to which one belongs, and other individuals and groups. Consumers with membership in a certain group try to increase their self-esteem through the process of social comparison. The more consumers strongly identify with and bond with a certain group, the more in-group solidarity and out-group hostility will occur. Out-group hostility gives group members strong resistance toward products and services related to the out-group. Individual resistance and group resistance are threats to marketers and dampen performance. By considering the existence of resistance to innovations and seeking strategies to overcome it, marketers can transform these threat into new opportunities. A better understanding of consumer resistance can complement research on the adoption of innovations and help in the development of a universal model of consumer behavior.

• Journal of Life Science
• /
• v.33 no.10
• /
• pp.791-796
• /
• 2023

It is well known that any kind of physical activity can be a useful nonpharmacological tool in the prevention and treatment of cardiovascular diseases, including antihypertension. There is also strong evidence that suggests that people with cardiovascular disease are less active than healthy people. Therefore, the aim of this study was to investigate the effect of a 12-week walking exercise intervention program on body composition, insulin resistance, and blood pressure in obese elderly women with stage 1 hypertension. The walking exercise program was performed for 50 min, three times per week. The intensity progressively increased: RPE 11 to 12, 40-50% HRR, for weeks 1-4; RPE 12 to 13, 50-60% HRR, for weeks 5-8; and RPE 13 to 14, 60-65% HRR, for weeks 9-12. The subjects were 20 obese elderly women with stage 1 hypertension (SBP: 140-159 mmHg or DBP: 90-99 mmHg). Half were placed in the walking exercise group (EX, n=10), and half were placed in the control group (CON, n=10). At the end of the program, the EX group members had significantly lower body fat, insulin resistance, and SBP compared to the CON group members. These results suggest that undertaking a 12-week walking exercise program improves body fat, insulin resistance, and SBP, which may improve the incidence of metabolic disease in elderly obese women with stage 1 hypertension.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.1
• /
• pp.51-58
• /
• 2023

The purpose of this study is to identify various variables that affect the intention to use the metaverse, which has recently attracted attention. In particular, while previous studies have focused only on the variables that have a positive effect on the spread of the metaverse, this study tried to examine both the use and resistance perspectives by examining the psychological variables of consumers who reject specific changes, such as innovation resistance. By constructing consumer characteristics and innovation characteristic variables that affect innovation diffusion, the relationship between innovation resistance, attitude toward the metaverse, and intention to use the metaverse was examined. As a result of the study, it was found that innovation propensity, social image, and conformity had a negative effect on resistance to the metaverse. In addition, innovation propensity, social image, suitability, relative advantage, complexity, and observability mediate innovation resistance and attitudes toward the metaverse, and were finally revealed as variables that have positive or negative influences on the intention to use the metaverse.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.35 no.4
• /
• pp.117-123
• /
• 2021

Gefitinib, a first generation epidermal growth factor receptor tyrosine kinase inhibitor (EGFR TKI), provides obvious clinical benefit in patients with EGFR-mutant non-small cell lung cancer (NSCLC). However, patients ultimately develop gefitinib resistance which mainly caused by EGFR T790M secondary mutation. In the current study, we investigated whether the root extract of Scutellaria baicalensis (SB) overcomes gefitinib resistance. Gefitinib-resistant H1975 human NSCLC cells (EGFR L858R/T790M double mutant) were treated with gefitinib and/or ethanol extract of SB (ESB) to evaluate the effect of ESB on the gefitinib sensitivity. The cell viability was measured by MTT assay and trypan blue exclusion assay. The colony-forming ability was evaluated by anchorage-dependent colony formation assay. Combined treatment with gefitinib and ESB markedly decreased the cell viability and colony formation than single treatment with gefitinib or ESB in H1975 cells. In addition, cells treated with both gefitinib and ESB exhibited a significant increase of sub-G1 DNA content which indicates apoptotic cells compared with those treated with gefitinib or ESB alone. As a molecular mechanism, combined treatment with gefitinib and ESB strongly downregulated the phosphorylation of ERK and JNK than single treatment with gefitinib or ESB. Taken together, our results demonstrate that ESB sensitizes H1975 cells to gefitinib treatment. We cautiously propose that ESB can be used in combination with gefitinib for the advanced NSCLC patients with acquired resistance to EGFR TKIs.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1728-1737
• /
• 2020

The purpose of this study was to verify the effects of the types of exercise on the health-related fitness among the elderly women, and to provide the information for managing and preventing the chronic disease. 40 elderly women who living in the B metropolitan city participated in the study and randomly divided four groups(control, aerobic exercise, resistance exercise, and combined exercise). The exercise groups performed 50 min, 3 times/week for 8 weeks at RPE 11-13. Low body strength, dynamic balance, static balance, and agility were significantly improved in all exercise groups after the intervention. Cardiovascular endurance was improved in aerobic and combined exercise groups. Consequently, any types of exercise could be improved the daily living fitness for elderly women if exercise intensity were the same. In addition, the combined exercise may be more suitable type of exercise for elderly.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.53-59
• /
• 1998

Flow pattern of air-water two phase flow depends on the conditions of pressure drop, void fraction, and channel geometry. Drag reduction in the two phase flow can be applied to the transport of crude oil, phase change systems such as chemical reactor, pool and boiling flow, and to present cavitation which occurs in pump impellers. But the research on drag reduction in two phase flow is not intensively investigated. Therefore, experimental investigations have been carried out to analyze the drag reduction produced and void fraction by Co-polymer(A611p) addition in the two phase flow system. We find that the maximum point position of local void friction moves from the wall of the pipe to the center of the pipe when polymer concentration increases. Also we find that the polymer solution changes the characteristics of the two phase flow. And then we predict that it is closely related with the drag reduction.