• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.1
• /
• pp.47-54
• /
• 2005

A method has been developed, which can be handled easily and economically for inputting depth data of complex bathymetry and enourmous tidal flats such as Mokpo coastal zone. The method is applied to Chungkye Bay, and some hydrodynamic features related with tidal flat are analyzed. Tidal amplification by construction of the sea-dike and sea-walls had been detected not only near Mokpo Harbor but also at Chungkye Bay which is connected with Mokpo Harbor by a narrow channel. This brings about the increase of tidal flat area, which makes the ebb dominance at Chungkye Bay more seriously. This pronounced ebb dominance with the increase of tidal discharge at the channel between Chungkye Bay and Mokpo Harbor, which results in deepened ebb dominance near Mokpo Harbor as well.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.96-96
• /
• 2022

가상현실 (Virtual Reality, VR) 기술은 3차원 가상공간 내에서의 높은 몰입감에 기반한 체험을 바탕으로 다양한 분야에서 활용되고 있다. 소방훈련이나 태풍, 지진 등 재해 대응훈련과 같이 인명피해의 위험이 있는 재해에 대한 VR 기술을 활용한 방재교육은 위험성을 동반하지 않으면서도 현장감에 기반한 높은 교육적 효과를 창출할 수 있다. 한국전자통신연구원에서는 VR 기술을 이용하여 소방훈련을 위한 실감 소방훈련 시뮬레이터를 개발한 바 있으며 목동재난체험관에서는 홍수, 태풍, 지진 등 다양한 재해에 대한 안전교육을 위한 자연재해 가상현실체험을 운영하고 있다. 이외에도 전국 지자체 및 교육청에서는 방재교육을 목적으로 VR 기술을 활용하고 있다. 그러나 기존의 VR을 활용한 수재해 방재교육은 범람의 수리학적 특성과 함께 수해지의 지형적 특성을 적절히 반영하지 못하는 단점을 가지고 있다. 이는 방재교육이나 경각심을 부각하는 데엔 효과적이나 실질적인 방재 가이드라인을 제시하는 데엔 한계가 있다. 본 연구는 몰입형 파랑해석모형인 Celeris Base를 기반으로 3차원 가상현실 시각화를 활용한 수리학적 홍수추적 모형을 개발하였다. 3차원 가상현실 시각화는 Unity3D를 이용하여 모의환경 내에 구현되었다. 강우-유출 과정의 수리학적 해석을 위해 동수역학 수치모형의 연속방정식 내에 강우와 침투에 대한 항을 추가하였다. 침투모형으로는 Horton 모형, Green-Ampt 모형과 함께 사면의 기울기를 고려한 Green-Ampt 모형을 적용하였다. 실제 유역에서의 홍수추적 모의결과는 관측값과 비교적 잘 일치함을 확인하였다. 개발된 모형은 VR 방재교육을 통해 일반인의 수재해 대응능력 향상에 기여함과 동시에 정확성 높은 홍수추적 모의결과에 기반한 홍수대책 마련에도 활용 가능할 것으로 기대된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.501-508
• /
• 2022

Required essential technique is to determine the maximum recharge pressure in the well with condition of non-ground failure for the recovery of the groundwater. Based on the classical soil mechanics, the maximum recharge pressure was estimated with the numerical anlaysis and laboratory triaxial test. In the numerical analysis, the maximum recharge pressure is defined as the ground failure stress. The ground failure of the sand was defined as the piping and the one of the caly was to the undrained failure by the confined pressure increment. In the triaxial test, the recharge pressure in the ground was modified by the back pressure in the specimen. In case of sand, the volume strain was dramatically increased at the 93 % of the maximum back pressure, same meaning of the 0 effective stress state. In case of clay, the only radial volume strain was to reached 1.5 % without failure. Therefore, The maximum recharge pressure could be determined with the numerical analysis and triaxial test.

• Journal of Korea Water Resources Association
• /
• v.36 no.5
• /
• pp.761-776
• /
• 2003

Numerical models were employed to investigate the hydrodynamics of water flow in the lake behind a dam and the spillway where supercritical flows and negative pressures are likely to occur. In this study, 2-D model, RMA2 was employed to examine the upstream flow pattern and 3-D CFD model, FLUENT was used to evaluate the three-dimensional flow in the approaching region and flow distributions in the spillways and discharge culverts. The bathymetry and the details of structures were carefully taken into consideration in building the models. The results from applying the 2-D model for the planned Hantan River Dam show that large eddies, the velocity of which reaches up to 1 m/s are occurring in several places upstream of the dam. That means that the 2-D numerical model could be utilized to investigate the two-dimensional flow patterns after the construction of a dam. Three-dimensional numerical results show that the approach flow varies depending on stages and discharge conditions, and velocities at spillways, discharge culverts, and sediment flushing tunnels are differently distributed. The velocity distributions obtained from the numerical model and a hydraulic model at the centerline of spillways 100 m upstream of the dam show reasonably similar results. It is expected that 2-D and 3-D numerical models ate useful tools to help optimize the dam design through investigating the flow patterns in the spillway and at the upstream of the dam, which is not always feasible in hydraulic modeling.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.575-589
• /
• 2008

In the present work, we investigate the hydrodynamic behavior of a turbulent bore, such as tsunami bore and tidal bore, generated by the removal of a gate with water impounded on one side. The bore generation system is similar to that used in a general dam-break problem. In order to the numerical simulation of the formation and propagation of a bore, we consider the incompressible flows of two immiscible fluids, liquid and gas, governed by the Navier-Stokes equations. The interface tracking between two fluids is achieved by the volume-of-fluid (VOF) technique and the M-type cubic interpolated propagation (MCIP) scheme is used to solve the Navier-Stokes equations. The MCIP method is a low diffusive and stable scheme and is generally extended the original one-dimensional CIP to higher dimensions, using a fractional step technique. Further, large eddy simulation (LES) closure scheme, a cost-effective approach to turbulence simulation, is used to predict the evolution of quantities associated with turbulence. In order to verify the applicability of the developed numerical model to the bore simulation, laboratory experiments are performed in a wave tank. Comparisons are made between the numerical results by the present model and the experimental data and good agreement is achieved.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1291-1295
• /
• 2005

제천, 충주, 단양의 3 개 지자체에 걸쳐 있는 충주호는 매년 여름철 집중호우시 부유쓰레기가 $3,000\~45,000\;m^3$ 의 범위에서 반복하여 발생하고 있으며 이들 대부분은 제천시 관내에서 수거되고 있다. 현재 부유쓰레기의 수거 및 육상 집하는 수자원공사가 담당하고 있으며 제천시는 이를 폐기물 매립장으로 운반하여 매립하고 있다. 이러한 부유쓰레기는 무게로는 그리 많지 않으나 부피가 매우 커 운반시 수거 차량의 운행대수가 많아지고 매립지 용량을 크게 소모하는 등 쓰레기 처리과정상의 문제점을 발생시키고 있으며 특히 부유쓰레기의 발생은 1 회성이 아니라 매년 장마와 홍수가 발생하면 되풀이되는 현상으로, 수자원 확보 및 홍수조절을 위해 설치된 댐에 의해 집중호우시 발생된 부유쓰레기가 댐 수위가 낮아짐에 따라 댐 주변부에 잔류하게 되어 수자원 및 수질 관리에 큰 어려움을 발생시키고 있다. 이러한 부유쓰레기는 댐 상류지역에 방치된 쓰레기들이 강우시 지표류와 함께 떠내려 온 것들로서 발생원인의 완전 제거는 불가능한 실정이므로 발생된 부유쓰레기를 최대한 신속히 수거하고 수거된 쓰레기는 소각이나 톱밥 생산 등의 물질자원화 방법으로 매립 양을 최소화 할 필요가 있다. 이에 본 연구에서는 충주댐에서 매년 집중호수시 발생하는 부유쓰레기의 발생 및 수거, 처리실태를 조사하며 또한 제천관내에 부유 쓰레기의 집중되는 원인을 분석하고 이로부터 적절한 부유쓰레기 관리대책을 수립하고자 하였다. 충주댐 부유물 발생 현황 조사 및 처리대책에 관한 연구결과는 다음과 같다. 부유쓰레기 발생량은 태풍의 발생에 따라 급격히 증가하여 년간 $12,587m^3\~45,356m^3$ 이 발생하고 있었다. 댐 및 하천 흐름 해석을 위해 2 차원 동수역학 모델인 RMA2 모형을 이용하여 충주댐에서의 물의 흐름을 해석한 결과 옥순대교$\~$청풍대교 구간 사이에 댐 및 지형적 영향으로 인해 잘 발달된 와류가 하도 전체를 통하여 발생되고 있었고 이는 댐 부유물 정체현상이 나타나는 지점과 잘 일치하고 있었다.

• Journal of Korea Water Resources Association
• /
• v.57 no.4
• /
• pp.263-276
• /
• 2024

Since the first introduction of one-dimensional transient storage modeling in the field of solute transport analysis in rivers, its application has notably expanded for various purposes, including for hydrology and geobiology over the past few decades. Despite strides in refining transient storage models, there remain unresolved challenges in simplifying complex river transport dynamics into concise formulas and a limited set of parameters. This review paper is dedicated to cataloging and assessing existing transient storage models, outlining the difficulties associated with model structures, parameters, and data, and suggesting directions for future research. We seek to enhance understanding of transient storage by highlighting the importance of continuously evaluating residence time distribution modeling, integrating hydrodynamic models, and using data with minimal assumptions. This paper would contribute to advance our comprehension of the transient storage process, offering insights into sophisticated modeling techniques, pinpointing uncertainty in parameters, and suggesting the necessary avenues for further study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.343-352
• /
• 2011

The water quantity by intake station as well as the tributary flow discharge acting as sink or source were added to the main flow rate in the present study and RMA-2 and RMA-4 models were applied to the reach from Pal-dang dam to Jam-sil submerged weir to investigate the influence of water supply withdrawal on the river flow and water quality. The numerical results revealed that the water supply withdrawal from 5 intake stations located upstream of Jam-sil submerged weir changed the total flow rate and therby induced different hydraulic characteristics in terms of water surface elevation and velocity. The changed flow field by the inclusion of water intake quantity led to the variation of water quality. By the consideration of the water supply withdrawal, the velocity structure was significantly disturbed by the outflowing flow condition nearby Gu-ui, Ja-yang, and Pung-nap intake stations. Furthermore, the mean velocity was lowered by 25% and the stage upstream of Gu-ui station rose upto 1.5 cm compared with the result by exclusion of water intake. In case of no water withdrawal, the distribution of BOD concentration was parallel throughout the domain. However, when the water withdrawal is considered, the distribution of BOD concentration nearby the Gu-ui, Am-sa, and Ja-yang station was signifiantly changed. In addition, the BOD concentration including the intake stations showed higher value at the downstream of the reach due to the loss of the discharge by water withdrawal effect. It is concluded that both the inflow and outflow discharges from tributaries and water intake stations should be included in the numerical simulation to analyze the hydrodynamic behaviors and mixing characteristics more accurately.

• Journal of Convergence for Information Technology
• /
• v.10 no.10
• /
• pp.115-122
• /
• 2020

Due to the climate change, torrential rain downpours unprecedentedly, and urban areas repeatedly suffer from the inundation damages, which cause miserable loss of property and life by flooding. Two major reasons of urban flooding are river inundation and inland submergence. However, most of previous studies ignored the comprehensive mechanism of those two factors, and showed discrepancy and inadequacy due to the linear summation of each analysis result. In this study, river inundation and inland flooding were analyzed at the same time. Petrov-stabilizing scheme was adopted to capture the shock wave accurately by which river inundation can be modularized. In addition, flux-blocking alrotithm was introduced to handle the wet and dry phenomena. Sink/source terms with EGR (Exponentially Growth Rate) concept were incorporated to the shallow water equations to consider inland flooding. Comprehensive simulation implementing inland flooding and river inundation at the same time produced satisfactory results because it can reflect the counterbalancing and superposition effects, which provided accurate prediction in flooding analysis.

• Journal of Korea Water Resources Association
• /
• v.37 no.12
• /
• pp.979-991
• /
• 2004

In this study, RMA2 and RMA4, the 2-D depth-averaged models, were employed to simulate the two-dimensional mixing characteristics of the pollutants in the natural streams. The velocity and depth were first calculated using RMA2, 2-D hydrodynamic model, and then the resulting flow field was inputted to RMA4, 2-D water quality model, to compute the concentration field. RMA models were verified using the velocity and concentration data measured in S-curved meandering channel. The results showed that the RMA2 model simulated well the phenomenon that the maximum velocity line is located at the Inner bank of meandering channel, and the RMA4 model was well adapted to reproduce the general mixing behavior and the separation of tracer clouds. Comparing model simulations with measured data in the field experiments, RMA2 model simulated well general flow field and tendency that the maximum velocity line skewed toward the outer bank which were found in field experiments. The simulations of RMA4 model showed that the center of the tracer cloud tends to follow the path in which the maximum velocity occurs. In this study, the dispersion coefficients are fine-tuned based on the measured coefficients calculated using field concentration data, and the results show reasonable agreement with predictive equations.