• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.620-627
• /
• 2005

In this study, life cycle assessment (LCA) on one of corrugated cardboard box as functional unit was carried out. System boundary of this study divided according to raw material acquisition, corrugated cardboard manufacture and corrugated cardboard box manufacture stage. And environmental impacts are evaluated on each stage and sub-process. The impact categories are classified into eight categories of abiotic resource depletion, global warming stratospheric ozone depletion, photochemical oxidant creation, air acidification, eutrophication, ecotoxicity and human toxicity. From the results, it is found that environment impacts at raw material acquisition stage is the highest as about 92% of whole stage due to liner board manufacture stage. The highest environmental impacts at sub-process of corrugated cardboard and box manufacture stage is a single facer and D/W backer process that included as main process in corrugated cardboard manufacture, and is caused by used energies like electricity, B-C oil, and etc. And then diagnosis for clean production process system of package is carried out. Through diagnosis, on loss rate is reduced and inner pressure intensity of box is improved. After improvement, environmental impact was decreased about 3.8% compared with before improvement.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.844-851
• /
• 2005

The purpose of this study was to determine feasibility of application of regenerated or recycled $TiO_2$ on the successive treatment of Cu(II)-EDTA. The recovery of copper, the reuse of $TiO_2$ and the assessment of acute toxicity was studied in the total eight successive photocatalytic reactions. Aqueous solution of $10^{-4}\;M$ Cu(II)-EDTA was treated using an illuminated $TiO_2$ at pH 6 in a circulating reactor. Two different procedures were applied in the reuse of $TiO_2$: i) recycle of $TiO_2$ without acid wash ii) regeneration of $TiO_2$ with acid wash to remove adsorbed copper in a previous experiment. The averaged decomplexation rate constant($k'_{obs}$) of Cu(II)-EDTA in recycle of $TiO_2$ without acid wash was approximately 45% less than that in regeneration of $TiO_2$ with acid wash. Removal of Cu(II) was near complete after 180 minutes in the total eight successive photocatalytic reactions using the regenerated $TiO_2$ after acid wash. In contrast, removal of Cu(II) was minimum at total fifth successive photocatalytic oxidation using the recycled $TiO_2$ without arid wash. The recovered $TiO_2$ was approximately 86% in average in each procedure. The recovered Cu(II) was 67.9% in average. The acute relative toxicity of the treated water rapidly declined at an initial reaction time up to 60 minutes but little declination was observed after 60 minutes due to little degradation of DOC. Relative toxicity of treated water using the recycled $TiO_2$ without acid wash we some what well correlated with the concentration of dissolved Cu(II). From this work, it is suggested that Cu(II)-EDTA can be effectively treated using an integrated cyclic photocatalytic oxidation with recovery of $TiO_2$ and Cu(II).

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.4
• /
• pp.86-95
• /
• 2002

Anaerobic digestion of municipal solid waste(MSW) is recently getting attention due to energy generation and abatement of global warming. MSW has high solid content and low nitrogen content. Its major component is cellulose and hemicellulose. The conversion rate of organic portion of MSW to methane is approximately 50%, representing $0.2m^3/kg$ VS. Long hydraulic retention time is required for high solid content and inoculum should be mixed with the feed. When MSW is digested anaerobically, maximum limit of C/N ratio is 25 and the optimum concentration of $NH_3-N$ is 700mg/L. lime and sodium bicarbonate are used to adjust pH. Excess addition of sodium bicarbonate above 3,500mg/L will cause sodium toxicity. Thermophilic anaerobic digestion is effective in the control of pathogen although its operation and maintenance is difficult. To optimize the anaerobic digestion of MSW, it is necessary to understand the mechanism of microorganims involved in anaerobic digestion.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.23-32
• /
• 2017

Foam block, popularized as the self-interior goods, is susceptible to fire since the main material is the polyethylene flammable synthetic resin. However, it is widely used in homes, offices, and multi-use facilities. In order to understand the fire characteristics of the foam block, two kinds of foam blocks sold in the market (non-fire retardant and fire retardant) were evaluated according to standard of KS F 5660-1 (Reaction to fire test). In addition, the hazard analysis of the gas generated by the combustion of the specimen was performed using the FTIR gas analyzer. The cone calorimeter test showed that the ignition and flame combustion of both two specimens were burned as soon as the radiant heat blocking device was removed, and it was confirmed that the flame could become a rapid propagation factor during the fire. The analysis of the combustion gas through the FTIR gas analyzer showed that both the carbon dioxide and carbon monoxide classified as the common combustion gases and the acrolein, ammonia, and hydrogen cyanide causing serious damage to the human body were detected substantially. This study showed that a foam block product has high ignitionability and generates toxic gases. Hence, it is urgently required to establish the standards used for properly classifying the combustion characteristics of the material on the basis of the use conditions of a foam block product and to prepare the standards on the purpose of use.

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.52-61
• /
• 2009

In this study, TAPEH (t-amyl peroxy 2-ethyl hexanoate) was selected for the reaction initiator which is a core factor for developing acrylic polyol binder. Tone M100 (caprolactone acrylate), 4HBA (4-hydroxy butyl acrylate), and 2HEMA (2-hydroxy ethyl methacrylate) were used for hydroxy-monomers. To check the applicability of raw materials mentioned above into the binders of 2 components acrylic polyurethane paint and reduce the VOC, the reactivity and film performance by different kinds of aliphatic polyisocyanate hardeners which are already generalized were reviewed. As the Tin-based catalyst has been regulated, the comparison test of reactivity and performance between the conventional catalyst and non-toxic metal catalyst recommended as the alternative was conducted as well. As a result, we were able to obtain the basic data which are necessary for applying 2 components high solid polyurethane paint and also reached a conclusion that it can be applied for developing new paints in terms of high performance, workability and environmental care.

• Korean Chemical Engineering Research
• /
• v.57 no.3
• /
• pp.438-443
• /
• 2019

A new measurement method is suggested to quantify the phosphate poisoning of cathodic Pt catalyst for HT-PEMFC. To do that, hydrogen peroxide was used as an indicator to reduce the error which has been occurred in conventional electrochemical measurement such as CV or ORR RDE with high concentration of phosphate ions. As a result, the current density induced from the reaction of hydrogen peroxide decomposition increased proportionally to the concentration of phosphate ion while the conventional methods show has a significant error with high concentration of phosphate ion. Thus, it is confirmed that the suggested way is superior to the conventional measurement method for the quantification of phosphate ion poisoning in an atmosphere similar to the actual operation condition of HT-PEMFC.

• Journal of Food Hygiene and Safety
• /
• v.31 no.4
• /
• pp.227-249
• /
• 2016

Arsenic and its compounds vary in their toxicity according to the chemical forms. Inorganic arsenic is more toxic and known as carcinogen. The provisional tolerable weekly intake (PTWI) of $15{\mu}g/kg$ b.w./week established by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) has been withdrawn, while the EFSA panel suggested $BMDL_{0.1}$ $0.3{\sim}8{\mu}g/kg\;b.w./day$ for cancers of the lung, skin and bladder, as well as skin lesions. Rice, seaweed and beverages are known as food being rich in inorganic arsenic. As(III) is the major form of inorganic arsenic in rice and anaerobic paddy soils, while most of inorganic arsenic in seaweed is present as As(V). The inorganic arsenic in food was extracted with solvent such as distilled water, methanol, nitric acid and so on in heat-assisted condition or at room temperature. Arsenic speciation analysis was based on ion-exchange chromatography and high-performance liquid chromatography equipped with atomic absorption spectrometry and inductively coupled plasma mass spectrometry. However, there has been no harmonized and standardized method for inorganic arsenic analysis internationally. The inorganic arsenic exposure from food has been estimated to range of $0.13{\sim}0.7{\mu}g/kg$ bw/day for European, American and Australian, and $0.22{\sim}5{\mu}g/kg$ bw/day for Asian. The maximum level (ML) for inorganic arsenic in food has established by EU, China, Australia and New Zealand, but are under review in Korea. Until now, several studies have conducted for reduction of inorganic arsenic in food. Inorganic arsenic levels in rice and seaweed were reduced by more polishing and washing, boiling and washing, respectively. Further research for international harmonization of analytical method, monitoring and risk assessment will be needed to strengthen safety management of inorganic arsenic of foods in Korea.

• Journal of Food Hygiene and Safety
• /
• v.25 no.4
• /
• pp.289-293
• /
• 2010

3-MCPD created in manufacture process was regulated in our country about soy sauce and HVP. The latest paper reported that Bound 3-MCPD is created as intermediate. Germany common risk assesment reported that Bound 3-MCPD must be reduced because Bound 3-MCPD can be created in estimation circle when this is hydrolyzed in human body, but the data about the toxity of Bound 3-MCPD is lack. Therefore, We analysis about 209 items food such as soy sauce, seasoning food and meat-eating manufactured goods using bound 3-MCPD analysis method developed recently. As result of survey, bound 3-MCPD detected in 8 items among 44 traditional sauce (0.02~0.28ppm), 8 of soup 12 items (0.01~0.96ppm), in 22 items of sauce 60 items (0.01~0.55ppm), in 16 items of meat-eating manufactured foods 30 items (0.04~0.18ppm), in 20 items of snack cookies 28 items (0.09~1.43ppm), in 8 in roasted oil foods 10 items (0.04~1.22ppm), in 6 items of peanut processed food 10 items (0.06~0.25ppm), in 1 of vegetable cream 15 items (0.05ppm). Detected level was lower than the result of monitored by other countries.

• Journal of Life Science
• /
• v.31 no.7
• /
• pp.677-685
• /
• 2021

Cannabis sativa L. belongs to the Cannabaceae family and is an annual herbaceous flowing plant. The plants can be classified into narcotic marijuana and nonnarcotic hemp. Different parts of C. sativa L. have been used as food, medicine, cosmetics, fiber and textile. However, the use of leaf, flower, and seed of C. sativa L was forbidden in Korea in January 1977 as a result of the Cannabis Control Act due to the narcotic properties. The plant's mature stems have limited uses for the production of fiber and sheets. Recently, various cannabinoids, terpenes and essential fatty acids were identified from C. sativa L., and their safety and useful bio-activities, such as neuroprotective, anti-inflammation, antithrombosis, antiepileptic, and antimicrobial activities, and the relief of pain, have been highlighted. Furthermore, the process of reduction of tetrahydrocannabinol, a representative narcotic compound, and the isolation of cannabidiol, a nonnarcotic active compound in C. sativa L., have been determined. These findings resulted in the legalization of C. sativa L. in Korea for medical use in December 2018 and the exclusion of C. sativa L. from the narcotic list of the UN Commission on Narcotics Drugs (UNCND) in December 2020. Therefore, developments of various high-value added products have commenced worldwide. Additionally, in 2021, the Korean government deregulated special zones based on hemp. In this study, the current status and the prospect of the hemp industry, as well as essential techniques for developing new hemp products, are provided for the activation of the Korea Green-Rush.

• Research in Plant Disease
• /
• v.24 no.4
• /
• pp.308-312
• /
• 2018

We analyzed rice sample with scab (collected in 2017) for fungal occurrence and found that frequency of Fusarium spp. was the highest among fungal genera. Within Fusarium, Fusarium asiaticum-nivalenol type dominated as 79%. Among mycotoxins, zearalenone was the highest toxin detected (1117 ng/g), followed by deoxynivalenol (163 ng/g), 15-acetyl deoxynivalenol (155 ng/g), nivalenol (110 ng/g). Analysis of mycotoxin levels in scabby and healthy grains (collected in 2015) revealed that both grain samples were contaminated with zearalenone. However, level difference of zearalenone between the samples was over 5 times as the scabby samples were 1400-2370 ng/g, while healthy ones were 240-430 ng/g. This result indicates that scabby grains should be removed when harvest to reduce zearalenone contamination in rice.